Decoupage of bottles - step-by-step instructions and description of the progress of decorating with various materials (110 photos). Decoupage bottles with fabric

Decoupage (covering plates, jars and other utensils with napkins) is a relatively new activity in the world of modern needlework. The technique is not very difficult to perform, but it requires attentiveness, accuracy and diligence, even for beginners.

This method of decoration originated in the 17th century in England and is still popular. Learning how to make original items can sometimes take a lot of time. For beginners, decoupage from napkins can be mastered gradually, working with photographs that show the process step by step.

Decoupage is a technique for decorating things by gluing patterns and designs cut out of paper onto them., corresponding to the artistic idea of ​​the master and subsequent varnishing finished work to protect against damage. The completed picture will look like a real painting.

Using this technique, they give a second life to old pieces of furniture or household equipment and create stunning crafts that can be used to decorate the interior or give as gifts to friends and family.

Tools and materials for work

To work with simple equipment you need the following equipment:

This is the standard set. Depending on the working material, it is supplemented with improvised means.

Basic techniques and stages of decoupage of various objects

For those who are starting to master the decoupage technique, and those who want to learn the manufacturing technique step by step, experts recommend starting to make crafts from napkins using photographs.

Manufacturing sequence on a wooden object:

1. Sand the surface with sandpaper to saturate the primer.
2. Prime and then sand the workpiece again.
3. Apply white acrylic enamel on top.
4. Apply the image, cover with several layers of varnish, sanding each one for gloss.

To understand how materials interact with each other, it is advisable to conduct a test on a similar sample. The peculiarity of the technique lies not in the ability to draw, but in the mastery of accuracy and filigree, because... You will have to work with scissors. It is better to use special pictures for decoration that have optimal print quality and paints that are resistant to water and glue.

When using napkins, you need to remove the two lower white paper layers, and the cards are used immediately.

There are the following techniques for attaching illustrations:

• Glue- the most common way. To do this, place a napkin on the object to be decorated and apply glue on top with a brush.
• Using a file- Suitable for textured bases. Place the prepared pattern on the stationery file facing the film and sprinkle it with water until the napkin is completely wet. After the paper residue is washed away, paint with the image will remain on the cellophane. Apply the film to the item to be decorated. so that the picture sticks to it.
• Iron— the hot method is suitable for flat surfaces. First coat the work area with glue and let it dry. Place the design on top and cover with baking parchment. Iron over the paper until the pattern sticks. Apply a layer of varnish.
• Using gelatin. Repeats the gluing technique, only the glue is replaced with gelatin. Suitable for decorating Easter eggs. For this, 1 tsp. dilute gelatin in 1 tbsp. boiling water and use as glue.

Creating a pattern from napkins

The following materials are used for decoupage:

• napkins;
• special cards sold in craft stores;
• drawings from the Internet or printed photographs;
• images from wrapping paper, magazine clippings, postcards.

You can glue any pictures, but not all of them fit perfectly, and it takes a long time to select the pattern.

The following parameters should be taken into account:

1. The main criterion is the size of the image, which should be in harmony with the size of the workpiece. Having mastered the technique of processing printouts, it is easy to change the format of patterns in different graphic editors.
2. The second factor is that the source material is not suitable for color palette. A successful combination of the colors of the design and the remaining decor is a significant part of success, which is solved with the help of a graphic program.
3. Sometimes illustrations do not match in image and style. The wrong choice of motive spoils the effect of the work performed. It is necessary to choose pictures that correspond to the idea that has arisen.
4. Sometimes napkins contain unnecessary elements that have to be removed.

An ideal illustration for decoupage looks like this:

Technique for creating textured patterns

To perform volumetric decoupage, it is recommended to prepare several layers of patterns from napkins. Next, they need to be glued together layer by layer and attached to the base using silicone, which gives the property a three-dimensional effect. In this technique, 3 zones are determined: the front part and the zones of intermediate layers. Before gluing the elements, it is advisable to form the component naturally.

An important condition becomes the creation of a believable sculpture. After the painting is completely formed, a water-based varnish is applied to some sections. These areas reflect light glare and are visually perceived as more voluminous.

Bottle decoration technique

Decoupage bottles from napkins for beginners is done step by step with photos. To do this, it is better to take a glass container that is flat and without any bulges. To work, you will need a standard set of tools with the addition of glass cleaner, which is used to pre-treat a bottle clean of stickers. It is advisable to work with gloves to avoid leaving fingerprints.

The execution sequence is as follows:

1. prime with varnish or PVA glue, let dry;
2. create a background with light acrylic paint in several layers until the transparency disappears.
3. cut out the design with scissors. If it matches the background of the container, you just need to tear off the ends of the napkin;
4. soak the image with water and secure;
5. Apply varnish along the top of the motif with a soft brush or spray;
6. gently straighten the folds with a swab;
7. at the end it is necessary to polish out minor errors;
8. After completing the final finishing, varnish.

DIY bottle decoupage: master class

To get high-quality glass bottle decor, you need to know a few important nuances. Do beautiful decoupage Everyone can use a glass bottle. Such a product can decorate any room in the house, for example, the kitchen.

Master Class:

1. At the first stage, you should prepare all the necessary materials for work. The main material is the bottle. It can be of any shape. However, it is worth noting that decoupage of a glass jar looks much more impressive.
2. The material prepared for gluing must be cut. The napkins are first compressed and cut with scissors. You should not make identical sections; the work will be more beautiful if the napkins cover the containers in a chaotic manner.
3. Alternatively, the work can use whole pieces of paper rather than cuttings.
4. The master must think about the method of attaching the napkins in advance. The easiest option is to stick them with tape.
5. The surface of the container must be prepared. It is important that it is clean and dry. To remove irregularities on the surface of the can, it should be sanded. If desired, the jar can be painted.
6. Should be protected workplace from pollution. For example, you can cover it with newspapers.
7. Next, take the glue and mix it with water. To obtain an adhesive mass, mix water and glue in equal quantities.
8. Then the prepared adhesive mass must be applied to the surface of napkins and all paper surfaces that will be used for decoration. While the mixture has not dried on the paper surface, it should be glued to the surface of the jar.
9. It is important to coat the edges of the cutouts well. To make the composition look better and more impressive, you should glue the napkins in 2 layers.
10. Before pasting the jar a second time, you should wait until the first layer has completely dried.
11. To secure the work, you need to apply varnish to the surface of the jar.
12. After the varnish has dried, you need to wipe the surface of the jar with a damp cloth, and then varnish it again.

Scroll:

• The second layer of napkins should be glued only after the first layer has dried.
• It is important to make sure that the design is printed on only one side of the napkins. Why? The fact is that after glue is applied to it, the napkin can print a design on the other side.
• You must wait until the glue has completely dried. Before varnishing the jar, you should try to tear off a piece of the napkin. If it gives in easily and comes off, then you need to reapply the glue.
• Sometimes napkins do not adhere well to the glass surface if the adhesive solution was prepared incorrectly. It is important to maintain the proportions and mix glue and water in the same amount. You can also purchase ready-made glue for decoupage, although its cost is higher than regular glue.
• The technician should keep a damp cloth at hand. With its help you can easily remove glue residues.
• If you stick napkins in several layers, you can achieve a beautiful 3D effect. Before applying the next layer, the previous one must be varnished.

What do you need to prepare for such decoupage?

Whatever the craftsman plans to make using this technique: making growths on a bottle, performing reverse decoupage, decorating dishes, he needs to “arm himself” necessary tools and materials.

So, he will need:

• Container, the decoration of which will be carried out.
• Glue. Most often, glue needs to be mixed with water, but stores sell a special adhesive for decoupage.
• Scissors. They can be used to cut elements for decoration, such as paper or ribbons.
• Varnish. Drying oil can replace varnish.
• Decoration elements, that is, materials for decoupage.

How to get build-up on a glass bottle?

Creating volumetric elements using this technique is not uncommon. There are many ways to create build-up on glass containers. The best way It is considered gluing polymer clay onto it. Thanks to this clay, any elements that the master wants appear on the bottle.

He can sculpt anything from polymer clay, animals, a sea anchor, or just convex balls.

Instructions:

1. Glass containers are prepared, polymer clay and a means to soften it.
2. The master makes with his own hands the growths that he wants to see on the bottle.
3. The clay is mixed in advance with a special substance that softens its structure.
4. After this, the growths can be attached to the surface of the jar, gluing them with “Moment”.
5. The material should be baked in the oven. The temperature should not be lower than 130 degrees.

Tip: To make three-dimensional patterns, you can use putty. It forms the outline of the desired figure, after which the figure should be filled.

Reverse decoupage of bottles: step-by-step instructions

The operation scheme is described step by step:

How to make a beautiful bottle cap?

To give the composition a complete look, you should think about how the bottle cap will look. A beautifully designed cork will give the composition a logical conclusion. The simplest option is to glue the cork with knitting yarn. It is advisable that it be the same color as the design on the napkin. It is also important that the yarn is bright and noticeable.

There is no point in using thin acrylic thread for socks for this purpose, since it is practically invisible.

You can also glue some kind of decorative insect to the surface of a bottle cap decorated with thread, for example, ladybug. Don’t forget about the possibility of decorating a composition using acrylic paints. The master can depict any design on the surface of the jar, for example, a daisy or the sun.

Options for final design of work

Consider the design of a decorated faceted bottle:

1. Take halves of beads to match the main color of the product and glue them with hot glue on the edge to emphasize the unusual shape of the container.
2. We tie a lace bow at the junction of the painted glass and the neck.
3. Glue small leaves and flowers onto the bow.
4. Finally, we glue the edges of the bottle and apply golden sand (use spray or powder) to add shine and shimmer.

Make a border around the edge of the product. To make it even, you need to glue masking tape and spread rubber glue along it. Then remove the tape and carefully roll up the glue with your hands after the paint has dried. It is advisable to place a piece of paper at the place where the line will begin to accurately complete the line.

Box decoupage master class

A cardboard box with a flat surface is suitable for decoupage.

Step by step technique:

1. Secure the corners of the paper box with strips of masking tape, and then prime the entire working area with acrylic compound.
2. Allow to dry and sand the primer with fine sandpaper.
3. If the coating does not lie evenly, do the manipulation again.
4. Then paint the craft with the shade selected for the background.
5. Apply decoupage glue to the illustration area.
6. After complete drying, apply the design on top and smooth it with a hot iron, placing a piece of paper.
7. Apply a thin layer of varnish to the image and surface of the product.
8. Using a foam sponge, apply background dye and other tones that match the color palette.
9. Use a brush to draw small elements.
10. To add some sloppiness, experts advise using a toothbrush to spray white paint on top.
11. Finally, varnish.

Decorating the plate

Decoupage of plates is done in several ways, but for beginners it is better to master this art of napkins step by step, preferably with a photo.

Decorating this dish is divided into two ways:

1. Straight - the motif is applied to the front side.
2. Reverse - the image is superimposed on the back of the dish.

For decoration, a smooth white plate made of porcelain and without patterns is suitable.

Decoupage for beginners step by step with photos from napkins is done using special devices.

Operating procedure:

1. Cut out the napkin pattern.
2. Degrease the workpiece on both sides with a cotton swab dipped in alcohol.
3. Wipe dry to prevent bubbles and creases from appearing during operation.
4. Carefully apply the resulting motifs to the front of the dish.
5. Apply glue on top, while smoothing the elements with a brush.
6. Allow the glue to dry and varnish the surface of the dish.

To use the plate for household needs, it is better to reverse decorate it.

The technique is similar to the above, but there are some features:

1. The illustration is attached to the reverse side tableware, which should be transparent for viewing the work.
2. The glue is applied only to the edges of the motif, without touching the front of the dish.
3. If you want to create an opaque background around the image, paint it with acrylic paint and dry it.

Chair decorations

For beginners creating decoupage of a chair from napkins, it is advisable to take a flat chair without large bends and carry out the steps step by step, preferably with a photo.

Decoupage on wood

Wooden blanks, ready for use various shapes are on sale. If you have an idea to decorate a household item, you will have to decorate it yourself.

Wood surfaces are divided into 3 groups:

1. Raw workpiece. If there is roughness, it is advisable to treat it with fine sandpaper. The recesses are leveled with putty or special primer. Dry and sand again with sandpaper. Next prime with white acrylic paint.
2. Impregnated, which is sanded for better adhesion of the motif to the product. Then wipe off the dust and apply primer.
3. Painted area requiring preliminary inspection. If the paint does not chip, then it should be sanded with fine-grained sandpaper. When the coating peels off, remove the old paint layer with a sanding device or a special solution. The treated surface is cleaned, primed and sanded.

Operating procedure:

• Sand the working area and prime it. If you want to create an antique effect, 3 layers of white are applied to the workpiece, each of which must dry. Then use sandpaper or a metal scraper to clean out the defects.
• If there are places eaten away by bugs, then treat them with a brush tip mounted on a drill and cover them with stain.
• Cut out designs from the top layer of the napkin.
• Place the motifs on the workpiece and carefully cover the top with glue and dry. Finally, varnish and let dry.

Decorating a cutting board

Carrying out the decor step by step:

Creating an original wall design yourself

The main idea of ​​​​creating such decoupage is to transfer or, so to speak, paste the image onto flat and other surfaces, such as walls, floors, ceilings or even cabinet doors. The images are paper applications that are later varnished, treated with crackle or additional paint, which gives them volume and realism.

Correct decoupage on the walls will definitely add originality to any room.

Preparing images that are cut from ready-made templates does not require much time. However, if you are not confident in your design abilities, then it is best to choose floral and natural patterns, they are quite “not picky”.

Materials and tools for implementation wall decoupage:

• Emulsion/acrylic paint intended for walls and suitable for interiors.
• A simple pencil.
• Templates cut out of paper.
• Wallpaper/PVA glue.
• Cutter/scissors.
• Primer coating.
• Acrylic lacquer.
• Level.

In addition, it is advisable to have a hard surface on hand that can be used as a lining while cutting ornaments, and the color of the paint should not be out of tune with the overall style of the room.

Instructions for creating wall decoupage

Before you start this kind It is advisable to familiarize yourself with the technique of smaller, traditional decoupage: Watch video tutorials or just take a general look at the features of the process.

After familiarization, you should try to put what you saw into practice:

• The surface of the walls should be cleaned with sandpaper, then primed and painted with water-repellent or acrylic paint, preferably in 2-3 layers, and allowed to dry.
• While the wall is drying, it is possible to cut out patterns from wallpaper or special napkins.
• On the already dry wall, the center and extreme points of the future composition are outlined with a pencil.
• After this stage, the pasting itself begins, for each fragment its place is carefully selected, smeared with glue on the back side and applied to the wall, gently pressing it with a slightly (!) damp piece of fabric.
• At the corners of the composition or near windows and doorways, ornaments should be cut out more roundly.
• After each action, it is worth trying to evaluate the work from afar, since the real scale of the work is impossible to see from close up.

After sticking the main drawings, you need to move on to smaller details. It is, of course, advisable to cut out all the templates together at the very beginning. Also, in no case should we forget that the composition must correspond to the idea and it should be checked from afar from time to time.

When the application has dried and all its parts are firmly in place, the composition should be gradually coated with acrylic varnish in 2-3 layers. After the last layers have dried, the decoupage is ready. If you adhere to all the above rules, this technique can transform your room for the better.

Pattern smoothing technique

It is recommended to glue napkins using the ironing method using a special compound. The substance is applied to the surface to be decorated, preferably flat, and left to dry a little. Then apply the cut out pattern and paper sheet, on top of which run a slightly hot iron over the slightly damp decor. Make sure that no creases form and the motif is fixed.

There is a special transparent paint on water based, which replaces glue. It is resistant to sunlight, moisture, even when the product is not varnished.

To avoid wrinkles, experts advise covering the surface with glue, placing a napkin on top, carefully smoothing it out with your fingers or a brush. Place a paper applique on a dry decoration item and cover it with a layer of adhesive.

Secrets from the masters

Decoupage for beginners step by step with photos from napkins can be gradually mastered even by beginners.

Subtleties that it is advisable for beginners to know:

1. Each surface (except glass) is treated with sandpaper and degreased. The plastic needs this manipulation to obtain roughness and better connection with the coating agents. The wood is stripped along the grain for smoothness. Metal objects are sanded to remove previous paint or rust. The glass is treated with alcohol-containing substances or acetone.
2. Be sure to prime the work area before painting with several layers, preferably white paint. If the material is porous, then the acrylic lays down unevenly.
3. Beginners are recommended to do decoupage from small parts. To stretch the images uniformly, when gluing them, begin to brush from the middle to the edge, while carefully removing any air bubbles that appear.
4. Creases and folds must be carefully leveled and hidden. If the result is a product without defects, it must be fixed with several layers of varnish. The more, the better it will look.
5. In order for a working tool to serve for a long time, after finishing work it is necessary to wash and clean it. To do this, place a container of water nearby and immediately lower the used brushes and washcloths into it.
6. When applying each layer, as well as after gluing the ornament, you need to dry it well., and start the next stage only on a dry area.

Don't be afraid to experiment!

It's very easy to learn how to make decoupage from napkins. For beginners, it is better to use the educational material with photos step by step. Having mastered this art, they create unique masterpieces that will delight others with their beauty.

Decoupage of cans, bottles, interior items and even indoor walls is an incredibly exciting activity that anyone can do. The main thing is to want to create a unique and beautiful thing and get the most incredibly interesting ideas!

Video: decoupage for beginners step by step with photos from napkins

Wash off simple decoupage for beginners, watch the master class in the video:

Find out how to glue a napkin using the decoupage technique in the video:

Having mastered the fascinating and simple decoupage of bottles for beginners, ordinary and non-standard bottles of wine, cognac, champagne or bottles that have not yet been drunk can be turned into real works of art that will pleasantly surprise, delight the eye, and as a gift touch to the depths of the soul. What could it be better than a gift made with your own hands, in which warmth, love and a piece of the soul are invested?

An original bottle, which is difficult to find a worthy use for, but would also be a pity to throw away, can easily be turned into an exclusive decanter for alcoholic beverages or an unusual flower vase using the decoupage technique. The best part is that this unique technique is available to absolutely everyone, because it does not require special skills or special material and physical costs. The main thing is a great desire, a little free time and a lot of creativity!

Interior decorations from glass containers

to contents

What is hidden behind the mysterious word “decoupage”

Decoupage is a word of French origin, which translated simply means “cutting”. This is special decorative technique, close to collage and appliqué, which consists of cutting out images from a wide variety of materials (paper, wood, fabrics, leather, etc.), which are then attached or glued to furniture, dishes, textiles and other types of surfaces for decoration.

In modern decoupage, pictures printed by printing are most often used, and this is not surprising, because paper applications can be glued to almost all types of surfaces - flower pots, vases, bottles, wooden kitchen boards, mugs, books, candles. So, an ordinary white plate can be turned into an amazing wall panel, a chic flower vase can be made from a nondescript bottle, and why not decorate your favorite... toilet bowl with cute daisies or forget-me-nots?! 🙂

The scope for imagination in decoupage is truly limitless! Of course, not just any paper is suitable for decoupage. Most often, three-layer paper napkins of original colors are used, which can be purchased in almost any store. This decoupage technique is called napkin technique. It is actually very convenient: the design you like is carefully cut out along the contour, glued and covered with a protective layer of varnish.

to contents

What you need to decoupage bottles

• A clean glass bottle, convenient for decoupage - even, without unnecessary bulges.
• Three-layer napkins with a selected pattern (for beginners, it is advisable to stock up on several napkins in case of damage), special decoupage cards, clippings of favorite pictures from magazines, printouts, etc.
• A product for degreasing the glass surface of a bottle (alcohol, acetone, solvent, nail polish remover).
• To prime the surface of the bottle you will need regular acrylic paint, which can be bought at any hardware store.
• Special decoupage glue or the most common PVA glue.
• Brushes for work of different thicknesses - it is better to take flat ones and always synthetic ones, since natural ones may leave hairs on the surface being treated.
• Colored acrylic paints.
• Acrylic varnish - it looks milky white, but when dry it becomes transparent.
• Additional decorative elements - sparkles, beads, rhinestones, bows, ribbons.
• One-step or two-step craquelure varnish - if you want to create an antique effect.
• Nail scissors for cutting out selected motif fragments.
• Painting tape for sealing areas not intended for painting.
• Foam roller or piece of foam rubber.
• Disposable plates or special trays for paints and varnishes.
• Sandpaper.
• Rags

to contents

Master classes for creative individuals

to contents

Step-by-step guide to decoupage with napkins

• Preparing the surface

First of all, we clean the bottle of labels - soak it in a soapy solution and use sandpaper to wipe off the remaining paper and glue. Now the surface must be degreased with alcohol, vodka, solvent, acetone, nail polish remover or high-quality detergent for glass.

• Prime the surface of the bottle

It is not at all necessary to prime the surface, but it is the background that will give the composition integrity and completeness, and the fragments of the drawings will look brighter and clearer. The background can be made either over the entire surface of the bottle, or only in those places where you are going to place the motif. To prime the bottle, pour a little acrylic paint into a wide jar or bowl. suitable color, if necessary, dilute it with water to a consistency reminiscent of liquid sour cream. The background color should be chosen taking into account the color of the selected image. The bottle should be slightly lighter than the base color of the napkin. Using a foam roller or sponge, apply primer to the surface of the bottle. For greater saturation, two or three layers of paint may be needed. Allow the first coat to dry before applying the second coat. To speed up the process, you can use a hairdryer.

• Cut out motifs for gluing

Take a three-layer paper napkin and use nail scissors to carefully cut out the motifs you like. You don’t have to cut out the picture, but carefully tear it out, then the clear boundaries of the picture will not be visible on the bottle and it will better “fit” into the background. Separate the top layer of the napkin. This is exactly what we need for gluing. For decoupage, you can use not only napkins, but also magazine clippings, reproductions, any other pictures you like, and even printouts made on a printer. If the paper is too thick, first apply several layers of acrylic varnish to the picture, give each layer time to dry completely, soak everything in water for 20 minutes so that the paper is thoroughly soaked. Then the paper is very carefully peeled off from the reverse side of the picture. Now the thin picture can be safely glued to the base. If everything is done properly, the picture will look like it was painted!

• Glue motifs onto the bottle

You can glue pictures with special decoupage glue, as well as undiluted or diluted with water PVA glue (in a 1x1 ratio). We place the napkins dry on a dry surface, and then “coat” them with a brush with glue from the middle to the edges, removing all bubbles and wrinkles. For testing, you can practice on an unnecessary bottle and napkin. Before use, decoupage cards must be soaked briefly in warm water, removed and dried on a towel. All these steps should be performed with extreme caution so as not to accidentally tear the picture. If you are using a decoupage card, grease it on the back side with PVA glue, apply the center to the bottle and, starting from the center, gradually straighten it along the front side with a brush with glue, avoiding the formation of bubbles and folds. You can glue several motifs on the widest part of the bottle, or distribute large and small elements over the entire surface.

IN Lately The direct and reverse decoupage technique has gained particular popularity among handicraft lovers. Its essence lies in gluing in a special way drawings and patterns cut from paper, leather, fabric or wood onto various surfaces. With the help of decoupage, craftswomen make amazingly beautiful, original crafts, which can decorate the interior of the house or become a gift. How to master this technique? It is easy to make decoupage of bottles with tights, the master class of which is given below. Try yourself in this technique and you will get a lot of pleasant emotions!

Rules for decorating bottles using decoupage technique

Your children will be delighted if you allow them to participate with you in creating unique items with their own hands. These pleasant moments will remain in the kids’ memory and will bring you both a lot of joy. Suitable for crafts different materials: fabric, women's tights, shell, seashells, toilet paper, napkins, lace, photographs and more.

Glue, primer, oil, paint, and varnish will help prepare the surface, fix it and give the necessary shape and background to the decoupage elements. Using this technology, you can decorate a bottle of champagne, wine, cognac, martini, a plastic or clay flower pot, a vase, or a glass jar. If you are going to make a craft for the first time using this technique, then in order to avoid some mistakes, familiarize yourself with several rules for performing decoupage.

Decorative products made using this technology should be as contrasting and bright as possible. It is important to choose a plain surface for gluing pictures and decorate it with bright, color-saturated elements. For creating original decoration Any bottle is suitable for the interior. When making this craft, consider the following recommendations:

• For decoupage, take a container of a simple shape, because it will be difficult to work with a non-standard one.
• If napkins are used in decoupage, then a design is first cut out of them, and then the top layer is separated and then glued.
• To glue fragments to the surface, it is best to use decoupage glue. However, regular PVA diluted with water will do instead.
• The drawings are glued to the surface of the object greased with glue and leveled to avoid the formation of wrinkles.
• When the bottle processed using this technique dries, it is opened with a special varnish for decoupage.
• After finishing the work, the craft, if desired, is tinted with acrylic paint and decorated with ribbons, beads, shells, sparkles, and bows.

Step-by-step master classes on decoupage bottles with nylon tights

Before starting decoupage work, prepare the bottle. To do this, it is soaked in warm water and then cleaned of stickers, dirt, and glue residues. The washed glass surface is degreased with alcohol. This step must be done, because otherwise the layers applied to the glass will not last long. Next, acrylic varnish is used. They cover the surface or elements of the bottle.

DIY champagne bottle decoration “Lady in the Hat”

It’s easy to make the interior of your apartment more original with the help of unusual, stylish decor. A handmade craft in your home will look especially impressive and will arouse the admiration of family members and guests. To make your own decoupage of bottles with tights using the “Lady in a Hat” master class, you will need the following tools and materials:

• champagne bottle and cap;
• PVA glue;
• tights;
• scissors;
• glue "Titan";
• canning lid;
• peas;
• spray paint brown, golden color.

Craft manufacturing technology:

1. Cut off the stockings from the tights.
2. Soak the nylon parts with PVA glue.
3. Place the stockings prepared in step 2 onto the glass container from bottom to top.
4. Make a beautiful drapery on tights, placed on the container to be decorated, and dry.
5. Take a canning lid. Put a small piece of stocking soaked in glue on it, tie the ends of the nylon fabric at the top of the wrapped element.
6. Bend the edges of the cap up and dry.
7. From the remains of the stocking, cut 6 strips, gather each on one side using a thread and a needle and form roses, soak them in glue, and dry.
8. When all the blank elements have dried, you need to glue the “flowers” ​​onto the cap and middle of the bottle with “Titanium”.
9. Glue peas in the form of earrings and beads to the top of the glass container, as well as to the “neck” of the dress.
10. Glue the champagne cap to the bottom of the “hat”.
11. Paint all elements and visible parts of the bottle with brown and then golden paint.

Decorating a holiday bottle using tights and napkins

If you show imagination and use the decoupage technique, then unnecessary things can easily turn into elegant and unusual beautiful decor. So, an ordinary glass bottle and nylon tights, napkins will simply be transformed into an exclusive stylish decoration for the table, interior, stunning wedding, New Year's gift, a gift for parents for the birth of a child or a loved one. The instructions below will help you make decoupage. To make it you need the following items:

• glass bottle;
• PVA glue;
• nylon tights;
• acrylic paint;
• napkins with an interesting floral pattern or lace motif;
• watercolor paints or spray paint.

Step by step instructions:

1. Clean and treat the surface of the bottle with alcohol.
2. Soak the stockings with glue.
3. Place the stocking on the glass surface from below and give the material a relief, turn the top edge of the fabric a little for a voluminous look at the neck, and make the window where the picture will be glued even.
4. Dry the product and cover it with acrylic paint. Dry.
5. Cut out a design from a napkin using a stencil, separate the top layer and glue it onto the glass surface. Dry.
6. Use an aerosol can to paint the surface of the glass container, except for the part with the picture. Dry.
7. Decorate the bottle with decor (butterflies, beads, rhinestones).

How to decoupage a bottle from pleated tights

It’s easy to colorfully decorate any glass bottle using the full type decoupage technique. Any nylon tights are suitable for this. This material, dipped in glue, drapes beautifully on a glass container. What shape to give to the nylon depends on the ideas and imagination of the needlewoman. The surface decorated with this material can be painted in any color. Decoupage of bottles with tights according to the master class described below will help turn ordinary glass containers into a beautiful thing for decoration. To make it you need:

• tights;
• glue;
• dye.

Instructions:

1. We prepare the glass container by washing and degreasing it.
2. We cut off the stockings from the tights, soak them in glue, squeeze them out and lay them out on the bottle in folds.
3. We dry the glued elements for several days and paint them with paint.
4. We decorate with bright elements and varnish.

Video tutorial for beginners on decoupage on a bottle using tights

Anyone can make a beautiful decorative bottle from tights, because it is not difficult and very interesting. To avoid for a beginner possible errors When performing decoupage, you must first watch a master class on this technique from a real professional. In the video below you will see all the stages of creating an amazing decor using a bottle and ordinary women's tights. Be sure to try to do this craft yourself at home, so that later you can decorate your home with an exclusive item.

The word decoupage literally translated from French means “cutting” or “unfolding”. Therefore, decoupage is a technique of decorating an object with cut out paper motifs.

History of decoupage technique

Decoupage is a very ancient decorative technique for decorative items and furniture, which consists of meticulously cutting out illustrations from various materials (paper, fabric, etc.), and then attaching them to the surface to be decorated.

The origins of technology lead to the Middle Ages. Although decoupage as an art form was first mentioned in the 15th century in Germany, it gained its greatest popularity in the 17th century in Venice, where at that time furniture inlaid with Chinese and Japanese motifs. But such a hobby was not available to everyone. Therefore, Venetian craftsmen came up with the idea of ​​making imitations of inlays using cut-out images that were glued to the surface of the furniture they produced.

The popularity of this idea grew, the technique of the process was constantly improved, and decoupage reached the peak of its glory in England in the 18th century. At that time, not only furniture, but entire rooms were decorated in this way.

The decoupage technique has not lost its relevance to this day.

Why is decoupage needed?

Decoupage is used to decorate hats, shoes, accessories (bracelets, watches), plates and trays, Christmas tree decorations, when creating exclusive interior items.

Thanks to this technique, you can easily turn an old vegetable box or drawer into a stylish piece of furniture. And a bottle that should have been thrown away can, in skillful hands, turn into an irreplaceable flower vase.

But that's not all decoupage is for. This technique not only allows you to save on purchasing new interior items, but also breathes life into them new life, turning them into unique items that cannot be found in a store.

What materials are needed for decoupage?

Today there are a lot of things that make the traditional process easier and faster. It will not be difficult for experienced craftsmen to select the necessary “ingredients” for a certain type of work (for example, for decorating a plate). But the newcomers modern variety tools and materials are sometimes even scary.

In big cities, there are more and more specialty stores for creative supplies every day. And those who decide to take up decoupage, due to their inexperience, rush to exactly where polite consultants will try to sell them branded materials and tools. But more often than not, in ordinary office supply stores you can buy almost everything you need for decoupage for a beginner, and at a fraction of the price. Although it is possible that you will still have to go to specialized retail outlets for some materials.

Here is a list of what a beginner needs for decoupage:

1. Tools:

• sharp scissors;
• synthetic brushes, preferably with a flat tip (natural ones tend to lose bristles);
• masking tape;

2. Materials:

• any napkin with a pattern, magazine clipping, printout, etc.;
• primer or, more simply, ordinary white acrylic paint;
• simple PVA glue (perfectly replaces special glue for decoupage and is much cheaper);
• the finest sandpaper;
• acrylic paints (which paints are needed for decoupage - decide for yourself, it can be either colored or metallic, that is, gold, silver, bronze, copper and so on, you can buy it either as a set or individually);
• acrylic varnish (although it looks milky white, it becomes transparent after drying);
• paint thinner or white spirit;
• wood putty, necessary when working with wooden objects.

3. Additional materials:

• crackle (for the formation of cracks);
• bitumen (for aging);
• silicone (for 3D effect).

Types of decoupage

Depending on the type of surface to be decorated and the desired effect you want to achieve, there are five types of decoupage techniques.

The most common is direct decoupage. What is needed for beginners and is most suitable is this particular technique, which is the basis for all the others. Direct decoupage is the application of an image to almost any surface without unnecessary effects.

To decorate transparent glass objects, there is a reverse decoupage technique. Its essence lies in gluing the application to the reverse side of the surface.

Three other techniques are more complex and are not suitable for a beginner decoupage artist:

1. Artistic decoupage is the combination of several techniques and effects into a whole picture.
2. Volumetric decoupage. To perform it, in addition to the standard set of items, a special paste, small pieces of fabric and/or natural materials (pebbles, eggshells) are required.
3. Decopatch - a mixture of decoupage and patchwork ( patchwork). Made from many pieces of paper.

Main stages of work

As with any process, for decoration using the decoupage technique, there are main stages of work, which are almost always performed in a certain sequence:

1. Cleaning the decoration item from any contaminants (label, plaque) using an alcohol-containing solution.
2. Coating the surface with acrylic varnish.
3. Applying a layer of primer or white acrylic paint.
4. Re-coating with acrylic varnish.
5. Grinding.
6. Attaching a picture.
7. Another layer of acrylic varnish.
8. The process of artistic underpainting, applying the main background, and so on.
9. Coating with acrylic varnish in several layers.
10. Decorating, creating various effects (for example, the effect of cracks is achieved by applying a layer of craquelure)
11. Applying the last layer of acrylic varnish.

When working using the reverse decoupage technique, the order of some steps changes: first, craquelure is applied (if necessary), then an image is attached, then decoration occurs using patterns, stamps, and the main background.

Objects for decoupage

The most common decorative items are various boxes, plates, cabinet doors and glass containers.

In general, decorating jars and bottles is quite simple. The list of what is needed to decoupage a bottle is practically no different from a typical list: the basic tools and materials are the same.

There is only one caveat when choosing a decoration method. As stated above, the design of transparent glass surfaces is done using the reverse decoupage technique. This rule is more often applied to flat decorative surfaces, such as plates, glass lids or doors, and the like. Bottles can be decorated in direct, reverse, or both ways together.

What else you need to decoupage a bottle is just to determine what your craft will serve as: a vase, a container for oil, or just a decoration for a window sill.

Newbie mistakes

Performing decoration using decoupage technique - creative process. But even here there are some points that do not forgive mistakes that are typical of almost all beginners.

The most common are the following:

1. Start working on an unprepared and unprimed surface.
2. Do not apply a finishing coat of acrylic varnish.
3. Haste and haste.
4. Late washing of instruments.
5. Smoothing the pasted image with your fingers.
6. Using gouache and watercolor instead of acrylic paints.
7. Mixing paints directly in a jar.

Sometimes it happens that you seem to be doing everything correctly, following all the steps and points, but the result is not very beautiful. To prevent this from happening to you, use the advice of decoupage artists:

1. You cannot brush over the same place more than twice.
2. You should squeeze the brush well from the glue.
3. Mix the paints with a small margin, this way you will have something to touch up the edges of the application or the background after drying.
4. The plastic surface must be made a little rough using sandpaper so that neither the paint nor the illustration comes off.
5. Before you start decorating an iron can, you should apply a base coat to it, since without it the paint will quickly peel off.
6. To achieve a uniform background coverage, apply paints not with a brush, but foam sponge with the smallest holes.
7. Do not skimp on varnish for the final layer, i.e. apply several layers.
8. Before gluing pictures printed from magazines or other paper, they should be wetted, this will reduce the likelihood of wrinkles.
9. An applique pasted on a dark background becomes almost invisible, so avoid dark colors or apply a light background under the picture.
10. Apply the craquelure with a sponge, then the cracks will be smaller and “run” in different directions.

Over the past few decades, decorating your home has become increasingly popular. Housewives are constantly looking for some new detail in the interior of the living room, kitchen or bedroom, which will certainly decorate the room and lift the mood. Manufacturers never cease to delight with all sorts of decorative items for every taste and budget. However, sometimes you still want something original, “not like everyone else.”

In this case it will come to the rescue original technique decorating various objects called decoupage, which means “to cut” in French. This direction creative activity has no boundaries or frames, here you can follow your imagination and realize the most creative ideas. As a result, we get truly original elements of home or even office interiors.

The most understandable and at the same time effective way for beginners is decorating bottles, which we will address in this article.

Features of decorating with napkins

Speaking in simple words, the decoupage technique is a kind of appliqué made from napkins or, for example, from fabric and other similar materials that are glued to various objects. The “canvas” for your imagination in the field of decoupage can be bottles, boxes, scented candles, key holders, eggs for Easter.

In order to make truly high-quality and stylish thing, you don’t need to have any special skills or experience in the creative field. Here it is enough to prepare the materials in advance and think through the design in accordance with the place where the decoration will be placed in the future. It is also important to be careful and take care of the appearance the masterpiece being created.

The theme of decoupage can be absolutely any, it all depends on your imagination. You can choose plain paper napkins, creating stylish bottles that can be conveniently placed on the top shelves of your kitchen unit. Now it is possible to purchase napkins with a specific theme. For example, bottles depicting a winter landscape or Santa Claus look incredibly beautiful. A delicate still life with exquisite flowers will be an excellent occasion for Have a good mood on the eve of spring.

Moreover, bottles decorated using the decoupage technique can be an excellent addition to a gift for a particular holiday. Having selected napkins with the required theme, you will present original gift and you will definitely please your loved ones.

Required materials and tools

We already mentioned above that paper napkins are most often used for decoupage. And sometimes needlewomen turn to drawings, decoupage cards or photographs (not simple ones, but those printed on a printer). For beginners, working with napkins is not always practical, because they have not yet fully mastered the skill, and this process is quite labor-intensive.

Therefore, experts advise starting with using decoupage cards made from rice paper. They are easy to work with, they are elastic, stretch without difficulty, and do not lose their shape when in contact with liquids. In stores you can find similar paper of different densities and sizes.

But decoupage paper cards are also often preferred. To create them, they use simple and well-known paper on which a drawing is applied. This version of the material is convenient for gluing, as it hardly deforms upon contact with liquid bases. The colors and designs of these cards are very diverse.

So, now let’s find out what materials will be needed to successfully decorate a bottle using the decoupage technique:

1. a glass (possibly plastic) bottle with a smooth surface and no flaws;
2. paper napkins (preferably three-layered) / cards for decoupage / all kinds of fragments from magazines / photos printed on a printer;
3. a product that removes grease from a glass surface (for example, alcohol or acetone);
4. acrylic paints and acrylic varnish;
5. PVA glue or specialized glue intended for decoupage;
6. brushes of various thicknesses;
7. other elements for decoration (beads, seed beads, etc.);
8. sharp scissors;
9. craquelure varnish (if you suddenly decide to create an antique effect);
10. sponge (foam rubber) of small sizes;
11. containers for diluting paints;
12. sandpaper.

Special attention should be paid to decoupage glue. Of course, you can turn to the help of a simple and well-known PVA, but the most successful result can be achieved using a specialized product.

Really, high-quality decoupage glue does not have a strong odor, is very thick or, on the contrary, has a liquid consistency. It does not darken when used, and when drying it leaves no marks. Experienced needlewomen claim that a special product makes the resulting product brighter and more attractive.

Let's look at some options for the most popular brands. For example, decoupage glue called Mod Podge Plaid Made in the USA and used only for decorating hard products. It dries within 72 hours after completion and gives the product a matte finish.

The glue called Decola manufactured in Russia. It is based on acrylic, the glue itself is colorless. It behaves ideally when in contact with fabric, wood, metal or glass, and dries completely in 12 hours.

Italian glue La Doratura It is prepared on the basis of alcohol, it is suitable for gilding work. Ideal for materials such as glass and ceramics.

How to decorate plastic?

Let's look at the technique of decoupaging a plastic bottle step by step.

1. Empty plastic bottle(preferably colorless and transparent) clean from labels and any traces. Next, use alcohol or acetone to clean the surface of the bottle, thereby degreasing it.
2. Now we proceed to “priming” the surface. To do this, a small piece of foam rubber must be dipped in white acrylic paint. Then apply paint to the bottle with point movements, literally poking it with a sponge. It is important to leave the bottom empty and start painting it after the main surface of the bottle has completely dried.
3. After a while, the same procedure must be done again both on the surface and on the bottom of the bottle.
4. Now you need to choose the design you like. If desired, you can cut out a separate fragment. Since the napkins are three-layer, we can get rid of the two bottom layers - we only need the top one, with the image. For convenience, you can cut the paper into several parts, from which you can create your own drawing.
5. First, you need to attach one fragment to the bottle, then use a brush dipped in glue (here it is better to use one that is shaped like a fan) to brush over the image. You need to apply glue from the center of the picture to its edges.
6. Having completed one drawing, you can proceed to the next, and when all are completed, you need to wait until the glue has completely dried.
7. If you wish, at this stage you can repeat the step with a sponge and paints, giving the bottle a tint. For example, mix white and pink acrylic paints, getting pink color.
8. In order to give the bottle a certain antique effect, it is necessary to create the appearance of crackling. For this purpose they seek help eggshells. It needs to be washed well and cleared of film, and then dried and broken into pieces of any size, approximately the same size.
9. Apply glue around the image cut out from the napkin, and apply a piece of shell to it, pressing it with your finger. It is important to be careful not to damage the fragile material.
10. It all depends on the flight of your imagination. As you want, this is how your creation will turn out. Pieces of the shell can be broken again and parts can be selected different sizes which will look more natural. You need to glue the shell up to the neck of the bottle.
11. Next, it is important to wait until the glue has completely dried, and then you can give the shell the desired color by walking over it with the same piece of foam rubber.
12. To give a more elegant and realistic look, you can draw cracks between the shells. For example, if you used pink color for the entire surface of the bottle, then for the so-called cracks you can choose a delicate lilac.
13. Now it is important to let the resulting product dry in accordance with the time indicated in the glue instructions.
14. At the final stage, you need to cover the entire surface of the bottle with acrylic varnish, using the same fan brush.
15. To give the bottle a full-fledged appearance, the same procedure with foam rubber must be done in relation to the cork.

As an additional decoration for the bottle, you can use various ribbons, ribbons, etc.

Step-by-step instructions for decorating a glass bottle

In fact, there is nothing difficult in creating an original piece of furniture. For beginners, this process may raise some questions, but over time everything becomes more than clear. Below is a master class on how to decoupage a champagne bottle with your own hands.

1. First you need to prepare the glass bottle for use. To do this, you need to clean it of labels and any dirt. It can be soaked in soapy water or treated with sandpaper.
2. Now you need to degrease the surface with alcohol or acetone.
3. Next, you need to coat the surface of the bottle with a primer so that the next layer adheres more reliably. After the product has completely dried, we begin to use acrylic paint. Its color must be chosen such that it will successfully combine with the shade of your choice. paper napkin: the paint should be at least a shade lighter than the napkins. The most commonly used base paint is white. Allow time to dry.
4. If desired, the color of the bottle can be made a little darker, and to apply the paint it is better to use a sponge.
5. Cut out the design you like from a napkin. For beginners, large-sized images are more suitable, as they are easier to work with. It is important to remember that for decoupage you only need the first layer of napkin, with a pattern.
6. Apply glue in the place where the picture is planned to be located. Next, we overlay the image here, and draw a brush along it from the center to the edges in order to smooth out all the unevenness.
7. After the pictures are in place, you need to apply another layer of glue on top for secure fixation.
8. At the final stage, we turn to the help of acrylic varnish, which we apply to the entire bottle. Experts say that when using 3 layers of varnish, the bottle can be easily used for everyday use, and not just as a decorative item.