How to make a wreath from paper leaves. Wreath of leaves

If your children spent the summer just like the heroine of the book "Linnea's Calendar" - observing nature and collecting seeds - it's time to put their collections in order. And also find out why trees shed their leaves - and learn how to weave a wreath from maple leaves. Maybe it will be useful as an autumn one for kindergarten or school?

The leaves of the maple tree that grows next door first turned yellow and red, and then began to fly off.

In winter, your maple tree doesn’t need leaves,” explains my gardener friend Blomkvist. “They do more harm to deciduous trees than good.” Keeping them alive in the cold is too expensive. It is more important for a tree to preserve its roots and trunk.

The green color of leaves is given by the molecules of a special substance they contain, it is called chlorophyll. It is chlorophyll that “produces” food for the tree, but it can only do this when there is light and warmth. Therefore, closer to autumn, the maple stops sharing its juices with the leaves. It stores nutrients for the winter, but in such a way that they stop passing into the leaves, and the chlorophyll in them is gradually destroyed.

So where does the leaves come from? yellow? And he was there all the time, just for the time being drowned out by the bright greenery. Deprived of the supply of juices, the leaves gradually separate from the branches. And now the first autumn leaf flies to the ground. Only a small scar remained on the branch. But a tiny leaf has already appeared above this scar. He sleeps in his kidney and waits for spring. And that's great!

When the maple leaves began to fall off, I was right there and made a wreath of leaves. It's not difficult at all.

1. I cut off the thick end of the cuttings from all the leaves. The first sheet was folded lengthwise along the central vein.
2. Having pierced the leaf at the midrib (on both sides), I threaded the cutting of the second leaf into the hole.
3. I folded the next one around this leaf and threaded its stem through the two previous ones.
4. I folded the third sheet. Then everything is the same... Nothing complicated, right?
5. After the 22nd sheet, I tried on the wreath. Just right! Then I overlapped the first and last leaves and “fastened” the wreath with a cutting. I made another wreath for Blomkvist for his birthday.

What a mess I have in my room: dried plants, beach finds, postcards, seed packets and much more, all in a heap! It's time to sort it out and put things in order.

First of all, I decided to create a herbarium. I took two pieces of thick cardboard. I wrapped the corners with fabric tape. I made slits in the cardboard and threaded ribbons through them. I pasted a label on the top side. And then she folded the sheets of dried plants into a herbarium folder and tied the ribbons.

You will need four large and eight small matchboxes (four in front, four in back). First, I took a thick thread and sewed a wooden bead onto each box. This is how handles appeared on the chest of drawers. Then I glued all the boxes together and wrapped the outside of the chest of drawers in fancy gift paper.

Autumn leaves are simply a great material for creating wreaths. A successful technique is also to combine them with dry grass, acorns, pine cones and chestnuts. Wreaths made from natural materials, can decorate the walls or door of the house. The best thing is that you can also involve children in creating this decorative element, who can help choose the color of the leaves and weave them into the wreath. How to make a decorative wreath from pre-prepared autumn leaves You will learn quickly and easily with your own hands from this article. Decor from autumn gifts makes the house cozy and fills it with a special charm. At this wonderful time of year, green, yellow and red leaves spread out like a bright canvas in a city park or forest. So the time has come to collect them and make them with your own hands various kinds crafts and decorative elements.

Making a beautiful wreath of autumn leaves with your own hands

Wreath components that need to be prepared:

• The base of the product on which all decorative elements are attached;
• Special floral wire;
• Maple, oak and other types of autumn leaves;
• Cones, acorns, nuts, chestnuts, autumn fruits and vegetables;
• Ribbons of different colors;
• Glue;

What you need to know in order to make a decorative wreath of leaves with your own hands:

1. Thick, but at the same time quite flexible wire is the most optimal and at the same time cheap basis for any wreath. You can buy it in a specialized store, or you can make it yourself using a regular metal clothes hanger. Its hangers need to be folded into a circle, leaving a hook on which our product will hang.
   You can also use natural materials for the base, for example, willow or vine twigs woven in a circle. Another option is branches with berries, cones or acorns.
2. The next step is choosing the type of wreath:

• One-sided - decorative elements are attached only to the front side.
• Double-sided - both the front and back sides are decorated;

1. Of course, the second way to decorate a wreath will look much better and more presentable.
   Then you can start selecting decorative elements. This is done taking into account how durable the product should be. In order for the wreath to decorate the house for a long time, you need to use only artificial fruits and vegetables. It is important to know that before use, the leaves need to be dried, but not completely, so that they can retain their shape in the product.
2. Cones, acorns, apples and other decorative elements must be secured to a wire or stick before use. You need to fix the grass, dried flowers and twigs with glue.
3. If you want to decorate the composition with a large bow, you need to decide in advance where it will be attached so that it does not stand out from the overall picture of the product.
4. You can hang this beauty on the door with a hook, but it would be better and more aesthetically pleasing to make a loop from a beautiful satin ribbon.

General tips and tricks for creating a composition from leaves:

• Natural materials should first be checked for bugs and dirt;
• Certain safety rules must be followed when working with young children;
• For the base it is best to use natural ingredients;
• If the craft will hang outside, it is best to choose a wire base.

Create a simple wreath of autumn leaves as a decorative element

By making such a wreath with your kids, you can not only have a great time, but also decorate your home with a bright craft that will warm your heart and awaken warm memories even in the most severe frosts. Moreover, to make such a craft you need a minimum of parts. This disposable plate made of paper, bright multi-colored leaves and glue. The first step is to cut out a circle from a paper bowl, as shown in the photo.

Then the child can start working - smear the circle with glue and sculpt autumn leaves on it. This creative task, so you need to leave the child room for creativity and not insist on a certain sequence of completing the craft.
At the very end, you can decorate the wreath of leaves with beads, rhinestones, or tie a large bow of satin ribbons.

Create yourself, teach your kids to think outside the box and creatively, and then they will grow up smart and quick-witted.

Video on the topic of the article

At the end of this article there is a small thematic selection of videos on making wreaths from autumn leaves, which will help reveal all the nuances of working with natural materials.

Door wreaths are a wonderful addition to your home decor. However, they can be expensive and some are a bit difficult to store. So I came up with a great alternative - making a wreath for the front door from fallen leaves. You can save a lot of money on it, and you don’t have to allocate storage space for such a wreath (this is a biodegradable option that can be thrown away without regret at the end of the season).

The fall of leaves is the most beautiful thing that happens in autumn. I love the way nature subtly tells us about the changing weather and seasons. Every day the trees seem new, beautiful, repainted in new colors, until suddenly on a windy day they become completely bare.
Imagine how wonderful it would be if you could preserve this riot of colors and turn it into a decoration for your home. I love the gorgeous variety of flowers and have always wanted to find a way to preserve these leaves. Unfortunately, beautiful leaves I only retain my color for one fine day.

I tried placing the leaves between the books, but they take several weeks to dry. But there is another simple way that will preserve all the riot of colors of the leaves.
First of all, it is necessary to collect fresh leaves without damage.

In order to dry the leaves, you need to heat them for a few seconds. microwave oven. This removes most of the water from the leaf. Then we have to iron each sheet with an iron. This will remove any remaining water, leaving the leaves flat and dry.

To create a wreath, we will need:

1. Fallen leaves (60-70)
2. Cardboard (to create a base)
3. Stapler and staples
4. Glue moment or glue gun
5. Twine
6. Parchment paper

Place leaves between two sheets of parchment paper and microwave for 10 to 30 seconds, turning once.
Check the leaves every 10 seconds until they are dry but not brittle.
Using a hot iron, iron the leaves until they are flat. You can place the leaves between sheets of parchment paper to keep them away from the iron.

Let's start creating the wreath:

Cut out the base for the wreath from cardboard.
We start from the right side of the wreath, going from top to bottom. We collect several pressed leaves in a pile and fasten them to a cardboard base. Place the paperclip just above the stem. We continue to sew the leaves around the base until we cover the entire right half of the wreath with leaves.
Then we move to the left side and create using the same technique.
Once the wreath is completely covered with leaves, use hot glue to position a few leaves over the visible brackets. You can also add a few extra leaves to any areas that look uneven.

To hang the wreath, glue a loop of twine, yarn or string to the back of the cardboard.

Here is the result:

I hope you like your new one autumn wreath made from colorful leaves!
Leave your feedback and suggestions!

Rate - Excellent Good Not bad Bad Terrible

Be sure to read other interesting articles:

Crafts made from autumn leaves will help decorate the interior of your home. Care in their manufacture and knowledge of several secrets for preserving this fragile beauty will help make such jewelry durable. In these master classes, we offer you several instructions on how to properly process the leaves and how to make amazingly beautiful garlands and wreaths from them.

Waxing leaves

The beauty of autumn leaves is undeniable. Their bright, rich and warm colors can please the eye in any craft. The only problem is that this beauty is short-lived and the leaves crumble over time, change their color, and the crafts made from them have to be thrown away. But there are ways to preserve leaves and their bright, rich color. One of them is wax.

Materials

To treat leaves with wax you will need:

• autumn leaves;
• wax or candles;
• aroma oils;
• wooden spatula;
• two metal containers;
• wax paper.

Step 1. The very first thing you need to do is collect the leaves. Despite the fact that you need dry ones for work, you can choose only slightly dried ones that are still able to bend without breaking or crumbling. Try to choose clean, whole leaves and preferably different shades.

Step 2. Be sure to process all collected leaves. Clean them from dust, dry them and straighten them. You can clean the leaves with a dry brush or damp cloth. And you can align them by simply placing them in a book or newspaper and pressing them on top with another book. After a couple of days, the leaves will be ready for further work. Please note that for ease of work, the leaves must have petioles; they do not need to be trimmed.

Step 3. Place the prepared leaves on the table so that they do not touch each other. It will be more convenient for you to work this way.

Step 4. Take two metal containers of different sizes. The smaller container should be such that the sheet is completely immersed vertically in it. Fill a large container with water and place a small container in it. So you will get a design for steam bath. This is exactly how the wax will need to be melted. You can use any wax; regular candles will also work, but without dyes.

Step 5. Melt the wax by stirring it with a wooden spatula. Add a few drops of aromatic oil. This will give a pleasant smell to your future crafts. For this master class, drops of cinnamon oil were used. Meanwhile, place a sheet of wax paper on the table.

Step 6. Take a dry autumn leaf by the petiole and carefully lower it into the wax. The sheet should be completely covered with wax, hold it in the container for a while, remove it from it and let the excess wax drain.

Step 7. Place the finished leaves one at a time on wax paper. It is necessary that they do not touch each other. Leave the leaves in this form until the wax completely hardens.

The leaves are ready! Now you can use them to create garlands, wreaths and other autumn crafts. Such leaves look original when suspended from the ceiling on a nylon thread. This synthetic thread is almost invisible and creates the illusion of beautiful autumn leaves floating under the ceiling. You can pass the thread through the petioles using a needle. Having thus strung the garland of the required length, secure it.

DIY leaf garland

A light and floating garland will bring the feeling of real autumn leaves into your home. Creating such an illusion of lightness with your own hands is not as difficult as it seems at first glance. You can use this garland anywhere: at the entrance to the house, under the ceiling of any room, or by attaching them to a laconic chandelier in design.

Materials

To make a garland of leaves with your own hands, prepare:

• leaves;
• fishing line;
• wax paper;
• masking tape;
• hot glue sticks;
• heat gun;
• scissors.

Step 1. Collect leaves. For this garland you will need identical leaves, whole and of similar colors. Their size may vary. Try to ensure that the leaves are already dry, straight and clean.

Step 2. Prepare the leaves before working. Be sure to clean them of dust and trim the petioles a little. Arrange the leaves in groups according to size.

Step 3. Decide on the place where your garland will be located. Measure the desired height of the garland. Cut a piece of wax paper the same size.

Step 4. Place wax paper on your work surface. It must be absolutely flat. It could be a table.

Step 5. Take the fishing line and secure its free end to one side of the wax paper. Stretch the fishing line to the end of the cut sheet and secure it with another piece of masking tape on the other side. Cut the line.

Step 6. Place prepared leaves face down on wax paper. The line should pass from above to the back of the leaves. Arrange the leaves themselves in order of size from largest to smallest. Make small indentations between them.

Lay out the very first sheet of the garland thread, indenting it a few centimeters from the edge. This free piece of fishing line will be useful for attaching the garland. Take this into account when deciding on the length of the garland.

Step 7. Secure the line with the leaves by carefully dripping hot glue onto them.

Wait for the glue to dry completely and remove the masking tape. As a result, you will have one strand of a garland with leaves floating in the air. Based on your own idea, similarly make the number of similar threads you need. To attach them to the chandelier, simply tie the end of the fishing line around it.

To make the garland last longer, you can additionally prepare the leaves before work by treating them with wax or decoupage glue.

Wreath of autumn leaves

Another way to decorate a room, table or front door in the autumn period of the year - this is a wreath of autumn leaves, created with your own hands. Children can use a similar craft to decorate their crafts for school or kindergarten. The undeniable advantage of this master class is that the base of the wreath is made, which you can then complement with other decorative details in the autumn spirit.

Materials

To make a wreath, prepare:

• ice cream sticks;
• dry autumn leaves;
• thick colored paper;
• scissors;
• glue;
• PVA glue.

Step 1. The base of the wreath will need to be made from popsicle sticks. They should be laid out in the form of a pentagon. The ends of the sticks should overlap each other slightly. If you need a larger diameter wreath, take more sticks.

A wreath is a beautiful headdress that came into our fashion from ancient times. Only earlier wreaths had a magical meaning, so they were woven only in holidays. Today we use wreaths as hair decorations even in Everyday life. In this article we will tell you how you can make an original wreath from natural and decorative materials with your own hands.

For our ancestors, wreaths were a real amulet. They paid Special attention plants that were used for weaving, because each of them had its own sacred designation, suitable for a certain event in life.

• The ancient Romans wove wreaths of laurel leaves on the heads of their emperors to emphasize their power and glory.
• They placed wreaths woven from oak leaves on the heads of great warriors, symbolizing courage and fearlessness.
• Before the feast, Roman men wore wreaths of myrtle, which, according to beliefs in the Roman Empire, was considered a plant that relieves intoxication.
• And here crowns of thorns covered the heads of Romans who were sentenced to death. Approximately the same rituals with wreaths existed among the ancient Greeks.

The peoples of Asia also had several interesting traditions related to wreath weaving. For example, brides on their wedding day had to decorate their heads with a wreath of orange flowers, which symbolized fertility. And outstanding writers, poets and playwrights were awarded olive wreaths, which symbolized popular recognition and admiration.

For the Slavic peoples, the wreath was an integral part of their life. With their help, they demonstrated to society their status, marital status, illnesses and important events:

• Orphan girls wore wreaths with blue ribbons. People who met such girls on the street always tried to feed them and give them something.
• A woman who had just become a mother wore a wreath of fresh roses and green leaves.
• A cornflower blue wreath on a girl’s head meant that she was awaiting a marriage proposal from her beloved.
• A primrose wreath symbolized the loneliness of a beauty abandoned by a young man.
• Periwinkle wreaths were worn by engaged girls.

You could list the types of Slavic wreaths for a very long time, but the essence of each of them is the same - they were a reflection of what was happening in life, and of course, they played the role of decoration.

Modern girls decorate their heads with fashionable wreaths without even thinking about their meaning. They buy beautiful finished products made from artificial flowers in the markets and wear them every day to complement their bright image. In view of this, we have prepared several interesting master classes with the help of which any girl will be able to make wreaths from different materials with her own hands.

DIY wreath base

One of the most difficult steps in creating any wreath is preparing the base. After all, it should be strong, soft and at the same time practical. From the many existing options, we have selected the three most optimal.

Branches base

The best natural material for creating the base of a wreath is young long coniferous or birch branches. Dried ones will not work because they are no longer elastic and will break the first time you try to bend them. Therefore, we recommend working with freshly cut branches. They need to be prepared as much as possible.

Make a basis for You can also make a DIY wreath from a grapevine.

Now let's move on to the sequence of actions that must be followed when creating a base from branches:

• Clean the branches from knots and needles, and then sort them by length.
• Decide on the diameter of the future wreath and select the required number of branches for work. To create a small wreath, a couple of branches will be enough for you; if you are planning a large product, then you will need about 5 branches.
• Connect all the branches together using linen rope. You will get a thin frame, which you will gradually compact by wrapping the remaining branches to it.

• As a result, you should get a fairly dense rim. It needs to be placed under some kind of press so that it lies under it overnight. This way we will achieve the ideal evenness of the base for the future wreath.

Paper base

To make a paper wreath base you will need a lot of newspaper or magazine sheets. You need to twist them into tight tubes, which are then glued together with tape. You will have to make a lot of tubes, because they must be layered on top of each other. As a result, you should have something like this:

You can add density to a paper circle from old nylon tights. Just wrap them around a paper base, securing the ends of the nylon with tape:

It will be very easy to attach any decorations to such a blank. By the way, if you don’t like nylon as a covering for paper, you can use any fabric.

Wire base

Wire is a very convenient material for creating the base of a wreath, but it is very hard, so it can injure the scalp. To avoid injury, the wire is wrapped in a thick layer of hemp or linen thread. You can show your imagination and use any other material - ribbons, foam rubber, and so on.

Base from old wiring

This material is softer than wire, but just as flexible. Therefore, by placing it on your head to measure the diameter of the future wreath, you only need to cut it to the required length and that’s it. You will not have to perform any other manipulations.

Alternatively, you can use an old hoop, vacuum cleaner hose, or embroidery hoop for the base of the wreath.

DIY wreaths made from natural materials

To make wreaths from natural materials, you need to collect as many different leaves, acorns, pine cones, twigs, dried flowers and berries as possible, since they will be the main decoration of the future headdress.

Since we have already described the options for bases for wreaths, we will not dwell on the stage of preparing them. You can use any of the blanks to attach natural materials to it, which will be discussed below.

DIY wreath on the theme “Autumn”

Going out to the park on an autumn day, you can find a huge number of beautiful bright leaves and other natural materials from which you can weave a themed autumn wreath. It may come in handy for a photo shoot or your child's autumn party. kindergarten or at school. We will consider three options for wreaths:

• DIY wreath of autumn leaves

To make this product, you need to collect different fallen leaves so that they are predominantly red and yellow. In this article we offer a manufacturing option DIY maple wreath.

1. Each leaf will need to be preserved in paraffin so that they retain their appearance and do not crumble over time.
2. To do this, grate an ordinary candle, melt the shavings and dip each leaf into the resulting liquid.
3. Instead of paraffin, you can use glycerin, but you will have to spend a little money on it.
4. When all the leaves are ready, they can be attached to the base. For this wreath, we recommend using a paper base wrapped in nylon so that you can glue the leaves without bending them.

Handmade maple wreath You can not only put it on your head, you can also decorate your home interior with it.

Rowan wreaths were woven in ancient times. People considered the berries of this tree to be a strong amulet against evil and damage. That is why rowan wreaths were placed on the heads of newlyweds and men leaving to fight.

The beauty of rowan wreaths is unique. The scarlet color of the berries and their tart autumn aroma add sophistication to the accessory. At the same time, absolutely anyone can create a rowan wreath. It can be done in two ways:

• Winding rowan bunches one by one with strong threads to a wire base (you can also weave DIY and laurel wreath);
• Stringing each berry on a thread like beads. You should end up with a long garland, which you will need to roll into several layers along the diameter of your head and tie them together with a strong red thread.

• DIY wreaths made from rowan leaves

1. To create such a wreath, you will first need to prepare bunches of rowan berry clusters with leaves.
2. If you have collected twigs with beautiful leaves, first preserve them in paraffin or glycerin, and then use wire to tie them to a grapevine base.
3. If the bunches of rowan berries are separated from the leaves, then you will have to tie these leaves to the bunches using linen thread.

DIY New Year's wreath

To make a New Year's wreath, you will need the following natural materials - Christmas tree branches and pine cones. They need to be tied to a base (preferably wire) according to the already known scheme. The cones can be glued using a glue gun.

If you want to dilute natural paints, you can additionally use gouache. You can paint Christmas tree needles with white gouache to create an imitation of snow. Alternative option The decoration is to varnish the wreath and sprinkle it with sparkles, which will also create a certain snowy appearance of the wreath.

Wreaths made from fresh flowers by hand

A wreath of fresh flowers is a head decoration for summer, spring and autumn celebrations - weddings, birthdays, engagements. You can use absolutely any flowers that grow in your front garden. In this article we will give an example of how to make a magnificently beautiful wreath for the bride.

Prepare required material and tools:

• Flowers
• Wire for base
• Secateurs
• Floral ribbon

Having prepared all the materials and tools, proceed to creating a wreath:

• Make the base for the wreath - wrap the wire with tape in several layers.

• If you don’t know the exact diameter of the bride’s head, you can make small loops along the edges of the wire, thread a ribbon through them, with which the bride herself will fix the decoration.

• Make bunches of flowers and greenery. Wrap each element together using floral tape;

• Attach each bundle to the base using decorative wires. As a result, you should end up with a beautiful product like this:

DIY decorative wreaths

The only difference between decorative wreaths and similar products made from natural materials is that artificial dummies of leaves, fruits, berries and flowers must be used as decoration. They look very nice, but they cost money. We advise you to resort to their use only if you will wear a wreath of decorative elements often.

This is relevant for dance groups who create images for choreographic performances, theater studios, whose costume department is constantly replenished.

Below we will present photographs of wreaths made from artificial materials. It is not advisable to describe the manufacturing technique, because it is no different from the one that we recommended using to create wreaths from natural materials.

DIY artificial flower wreath

DIY autumn wreath made from decorative materials

DIY ribbon wreath

DIY Greek wreath made from decorative materials