How to make a lush snowflake out of paper. How to make a paper snowflake step by step

You can use office paper for cutting out snowflakes, colored paper For children's creativity, paper for origami.

It is convenient to use ordinary stationery scissors to cut out relatively large sections of the pattern, for example along the edge of a snowflake.

To cut out small details and complex patterns, it is better to use hairdressing scissors and manicure scissors.

DIY snowflakes

So, the paper and scissors have been selected, now you can proceed to the first stage of making snowflakes - folding the paper. To obtain a hexagonal blank from which a snowflake will subsequently be made, cut out a square of the required size from a sheet of paper.

How to get squares different sizes from A4 sheet

1. Fold a sheet of paper in any way, but so that one part is larger than the other, and then cut along the marked line.

2. Fold most of the sheet along a bisector.

3. Cut off the excess paper to make a square.

4. The blank for the big snowflake is ready.

5. Repeat steps 2-3 with the smaller part of the sheet remaining after step 1.

6. The result is a blank for a medium snowflake.

7. With the trim remaining after step 6, repeat steps 2-3.

8. The result is a blank for a small snowflake. Thus, from one A4 sheet you can make blanks for three snowflakes of different sizes.

The dimensions of the blanks may vary slightly. They depend on how the original sheet was folded in step 1. In addition, a large snowflake can be obtained by cutting a square from a whole A4 sheet.

How to fold a hexagonal blank from a square

Now from the square we need to fold a regular triangle (in unfolded form - a hexagon), from which a snowflake will be cut.

Method No. 1

1. Fold the square in half.

2. Then fold the sheet “by eye” so that the angles indicated in diagram 3 are equal.

3. Turn the workpiece over to the other side.

4. The fold should run along the edge of the workpiece, bent in step 2 of the layer, and the top edge should coincide with the left fold.

5. Trim off any excess paper evenly.

Method No. 2

1. Fold the square diagonally.

2. Mark the middle of the leg of the resulting triangle (side).

3. Connect the vertex (right angle) of the triangle with the intended middle of the leg. Mark the fold line and again unfold the workpiece to a triangle.

4. Now mark the middle of the base of the triangle.

5. Connect the middle of the leg with a point lying on the marking line obtained in step 3. The fold line should pass through the middle of the base of the triangle.

6. Connect the base of the triangle to the fold line obtained in step 5.

7. Cut off the excess paper along the indicated line.

Advice

Choose the size of the hexagonal blank (large, small or medium) yourself based on the paper you use for cutting, the complexity of the snowflake and your skills in working with scissors.

Cutting out a snowflake

1. Fold the regular triangle obtained using one of the methods suggested above (an unfolded hexagon) in half. Perform all actions very precisely so that later you do not cut through the layers of paper folded crookedly with scissors. Make sure that the circled tip (see diagram) is in the center of the future snowflake.

2. Start cutting. In the diagrams, areas of paper that need to be removed are indicated in bright pink. First, form the outer edge of the snowflake. To do this, cut out a pattern on the top side of the workpiece, as shown in the diagram.

3. Then cut out the pattern on both sides of the workpiece. The last to be cut are small elements inside the workpiece and near an acute corner.

4. The snowflake is ready, all that remains is to carefully unfold it.

We will cut out all the presented snowflakes according to this description, starting from step 2, when the regular triangle is already folded in half. The fact is that all snowflakes are cut out the same way, only the pattern changes, so we did not repeat the description of the work many times, but limited ourselves to exact diagrams.

The process of making each snowflake consists of 3-5 sequential diagrams, on which the sections of paper to be removed are indicated in black. The last diagram, which shows a completely cut out, but not yet unfolded, snowflake, is also a template. You can “by eye” draw a pattern from it onto your workpiece, or transfer it using tracing paper and carbon paper.

Advice

The snowflake should look like a graphic image with a clearly readable pattern, so perform all stages of the work very carefully and accurately.

Snowflakes. Scheme

Such snowflakes will become beautiful New Year's interior decoration .

More options for making snowflakes

Snowflake. Step-by-step manufacturing process

Take a rectangular sheet of white paper and, following the instructions, cut out a snowflake from it. Imagine, come up with your own patterns, and you will get the most unusual and beautiful snowflake!

New Year- the most fabulous and beautiful holiday in a year that both children and adults are looking forward to. It represents not only changes in life, but also gives a little magic to such a cruel world of reality.

IN new year holidays Everything around is decorated with bright garlands and lanterns, Christmas trees are decorated with multi-colored balls, and houses are decorated with incredible snowflakes. Snowflakes have always been associated with winter holidays most. In a burst of creativity and in order to save money, you can make snowflakes yourself.

I offer several ways to make incredibly beautiful snowflakes and how to decorate your home with them for the holidays.

Simple paper snowflake

The easiest way to cut out a snowflake has been known to us since childhood - cutting out various figures and curls on the sides of a multi-layered sector.
Creating these snowflakes from paper is very simple. For this simple task you only need imagination, paper, white or any other color, scissors and a pencil.

Step 1

You need to lay out a piece of white or colored paper size A4-A5 on a hard, flat surface. Then place a round plate or saucer on it, trace the circle with a pencil and cut it out.

Step 2

The resulting circle needs to be folded in half three, if possible four, times. We will get a sector of six or eight layers.

Step 3

Now comes the most interesting step - creating a beautiful pattern. To do this, you can use your imagination, or use ready-made diagrams. The pattern just needs to be drawn on your workpiece with a pencil. Then we take sharp thin scissors, maybe manicure scissors, and carefully cut out the drawn diagrams.

Step 4

We unfold the workpiece into its original shape. It turns out a little crumpled, for this you can iron the snowflake with an iron, but always through the fabric and without steam. Or you can put the workpiece in a book for a while, but this process is much longer than the previous one.

Step 5

To make an original snowflake, you can coat it with glue and sprinkle with glitter. Or paint it with watercolors in ombre style - make a transition from one color to another. Or draw bright dots on a snowflake. But we must not forget that the paint will significantly soften the paper, so you need to work very carefully. You can cut a snowflake out of foil. Then it will immediately turn out to be a beautiful silver or gold color.

Step 6

The last thing is to hang the finished snowflake with a lace, ordinary thread or wire. This decoration can be placed on a Christmas tree, you can create a whole garland of snowflakes, and decorate a window with it, simulating snowfall, attach it to the ceiling, furniture, wherever your imagination allows.

Simplified quilling

The latest popular innovation in making snowflakes is quilling technology. This method is much more complicated than regular paper cutting and requires certain skills and time.

I'll tell you how to make a three-dimensional snowflake out of paper, but in a slightly different system than quilling.
To make a snowflake, we need a newspaper or an old unnecessary book, or a stack of paper, but it must be soft so that it can easily be deformed. And also scissors, thread, glue and glitter.

Step 1

You need to cut out strips of paper measuring 2 cm X 20 cm on average. You can choose the size yourself, depending on what size snowflake you want to get as a result. To start, you should have seven stacks, each with 6-10 strips. Adjust the number of strips depending on the thickness of the paper: the strips should bend easily, but keep their shape.

Step 2

Fold the strips in half and gather them together. Make the middle stripe longer than the others, the side stripes a little shorter, as in the image. You can cut off the excess length. Tie such a petal with a thread and place it under some heavy object, be it a book or a table lamp.

In the original you should make eight such petals.

Step 3

Cut another stack of 15 strips of the same length. Roll the stack into a small ring and tie with thread. For strength and reliability, you can lubricate the strips with glue so that they do not unwind.

Step 4

Lubricate the end of the petal generously with glue and attach to the ring. Hold for a while until the petal sticks securely.
Repeat the same process with all the petals.

Step 5

When the snowflake has dried and is completely ready, its edges can be lightly coated with glue and sprinkled with glitter, or you can decorate it with the color you like.

Step 6

Attach with glue or simply thread a thread through the petal. You will get an original and wonderful three-dimensional toy for the Christmas tree or element New Year's decor for home.

Children's snowflake

Doing crafts with children is very useful activity, which not only develops creative imagination, but also instills in the child perseverance and accuracy. For the New Year, you can make funny snowflakes to decorate your children's room.

To do this, you will need cardboard, scissors, glue, scraps of fabric, glitter, colored pencils and eyes, which are sold at office supply stores, although you can simply draw them.

Step 1

You need to print out the diagram or, if you are good at drawing and come up with your own snowflake, you need to draw it on cardboard. When the diagram is ready, cut it out.

Step 2

We glue the eyes or draw them, whichever is more convenient for you. We finish drawing the mouth, nose, eyebrows. Color the snowflake with pencils in the color you like.

Step 3

From fabric or colored paper we cut out a snowflake cap, a belt and other details that you came up with. Glue them to the snowflakes and decorate them with glitter, beads, beads or whatever you have on hand.

Step 4

The finished snowflake does not have to be hung on a Christmas tree or window. It can be attached with double-sided tape to the wall near the child’s bed, and New Year's atmosphere secured.

These are just basic ideas on how you can decorate your home for the New Year holidays. And the rest depends on your imagination!

Happy crafting!

DIY snowflakes are the most affordable and simple New Year’s decoration for your home, school or workplace. You can make them from plain paper, cutting out according to ready-made templates and diagrams, which in large quantities can be found on the Internet. You can also do beautiful snowflake large and voluminous or using quilling or origami techniques. Moreover, as a source material, in addition to white paper, newspaper sheets, pages of an old book or an unnecessary music notebook are also suitable. Such non-standard material, especially if it is artificially aged with coffee, will give the finished craft a special charm. As for the manufacturing technique, most master classes for New Year's snowflakes are quite simple and can be reproduced even by children, for example, as part of a labor lesson at school. In our article today, we have collected for you a whole selection of original templates and patterns for cutting out beautiful paper snowflakes for adults and children. In addition, here you will find interesting step-by-step master classes with photos of snowflakes, as well as videos with lessons on how to make them yourself.

Simple DIY paper Christmas snowflake 2017 for children, master class

First, we invite you to master a very simple DIY paper Christmas snowflake master class for children. It is so affordable that it is suitable even for kindergarten. To make this simple DIY paper Christmas snowflake for kids, you can use either plain white paper or colored sheets. Thin corrugated paper also works great.

Necessary materials for a simple DIY paper snowflake for children

• sheet A4
• scissors
• felt-tip pens
• scotch
• stapler
• decor (sequins, rhinestones, buttons)

Instructions for a DIY New Year's snowflake master class for children

1. We cut the sheet into strips 2-3 cm wide and about 15-20 cm long. The number of strips will determine how voluminous the craft will be in the end.
2. We wrap each strip on a felt-tip pen or marker, securing the edges with paper tape.
3. Leave the pieces for at least an hour so that they take on a wave-like shape.
   
4. We remove the paper strips from the markers and connect them together using a star-shaped stapler.
   
5. We decorate the ugly junction with bright sequins, beads or rhinestones. Also, if desired, you can add pieces of New Year's rain or glue confetti. Ready!
   
   

Do-it-yourself volumetric snowflake 2017 made of paper, master class with photo

Do-it-yourself voluminous paper snowflakes are considered one of the most complex in terms of technique. However, if you have it on hand detailed instructions with step-by-step photos, as in our next master class, then you shouldn’t be afraid of difficulties. We assure you that after the first self-made voluminous snowflake made from paper with your own hands, the remaining copies will “go like clockwork.” See for yourself by following the instructions below.

Necessary materials for making a voluminous paper snowflake with your own hands

• sheet A4
• scissors
• tape or glue

Instructions for a master class on DIY 3D paper snowflakes

1. For the next craft you will need a rectangular sheet with the following parameters: length - 25 centimeters, width - 18 centimeters.
2. We bend the lower left corner of the sheet inward, as in the photo below.
3. Trim off the excess edge to create an isosceles triangle.
   
4. Fold the triangle in half.
   
   
5. Using scissors, make two shallow cuts on the tight side of the fold, as in the next photo.
   
6. We unfold the workpiece so that we get a diamond with cuts. We connect the inner corners of the central cut together using tape or glue.
   

   On a note! If you use glue, be sure to additionally secure the workpiece, for example, with a clothespin until it dries completely.

7. We repeat the procedure with the next edges of the cut, fixing them in the opposite direction with the first workpiece.
8. We will also fasten the edges of the last cut together, but in the opposite direction.
9. The result should be the following design.
10. For one volumetric snowflake you will need from 6 to 8 such blanks. They can be made in different colors to add color to the craft.
    
11. Using tape or glue, secure all the blanks according to the template below.

Beautiful large snowflakes 2017 made from paper yourself - step by step with photos

You can and quite easily make a beautiful paper snowflake with your own hands for decoration. large sizes. Such decor will certainly attract everyone's attention and will become an interesting interior solution on the eve of the New Year. Learn how to make a beautiful large snowflake out of paper with your own hands step by step from our next master class.

Necessary materials for a large DIY paper snowflake

• sheet A4
• Ruler and pencil
• clothespins
• New Year's garland, glitter

Instructions for a step-by-step master class on a large beautiful snowflake with your own hands

1. First you need to cut thin paper strips in the amount of 20 pieces, 10 strips on each side. The longer they are, the larger the finished craft will be. Then we lay out five strips in a row at small intervals, and lay out five others on top according to the braided principle.
   
2. We turn the resulting workpiece so that it lies in front of us in the form of the letter “X”. Now we connect first the adjacent and then the outer strips and glue them. Secure the top with clothespins until completely dry.
   
3. Repeat on each side. As a result, there should be one strip on each side, forming a thin cross.
   
4. Leave the workpiece to dry completely for about half an hour. Then we remove the clothespins and move on to the second identical part of the craft.
   
5. We connect both parts together by rotating the bottom part of the snowflake 45 degrees. Now the free strips can be fixed with the ready-made beams.
   
6. We glue them with glue and secure them with clothespins, leaving them to dry completely.
7. All that remains is to decorate the finished snowflake. This can be done using pieces New Year's garland and glitter.
   

   On a note! Instead of store bought glitter, you can use broken ones. Christmas decorations. To do this, carefully crush the glass toy wrapped in thick fabric with a rolling pin. The resulting crumbs must be mixed with transparent glue and then used to decorate crafts.

   DIY snowflake 2017 from a book for the New Year, step-by-step master class

   In the next step-by-step master class we will make snowflakes for the New Year with our own hands from an old book. It's a great way to breathe new life into its yellowed pages. You can’t call a snowflake from a book for the New Year with your own hands (step-by-step master class below) a simple children’s craft. Small children definitely cannot handle it. This is more of a master class for creative adults who don't appreciate making New Year's decorations purely as children's fun. On the contrary, they are happy to create beautiful and exclusive decorative elements.

   

   Necessary materials for a snowflake from a book for the New Year

   • book sheets
   • glitter
   • ruler and pencil
   • scissors
   • fishing line or thick thread

   Instructions for a step-by-step master class on snowflakes from a book for the New Year

   1. First you need to draw book sheets into strips 2 centimeters wide.
      
   2. For one side you will need 7 such strips: 1 the full length of the page, two 2 centimeters shorter, two more 2 cm shorter than the previous ones, and two strips 6 centimeters shorter than the first.
      
   3. The longest strip should be folded in half to form a loop, gluing the bottom edges together. On the sides you need to fold the strips shorter, also gluing their lower parts, as in the photo below.
      
   4. Repeat similar manipulations with the remaining strips and fix them under heavy pressure, for example, a table lamp.
      
   5. When the workpiece dries, you should additionally secure its edges with thin fishing line. In general, you will need 6-8 such blanks for one snowflake.
      
   6. Again, cut the book sheet into strips of equal length. Cut and roll into a tight ring, tie with fishing line. The ring can also be additionally coated with transparent glue.
      
   7. After complete drying, you should proceed to joining the craft. To do this, coat the end of the workpiece tightly with glue and connect it to the ring.
      
      
      
   8. Repeat with each workpiece.
      
   9. To better fasten the snowflake, coat the outer loops of the adjacent rays of the snowflake with glue.
      
   10. Small sparkles are suitable as decoration and should be applied to the side edges of the snowflake. You can also use pieces of garland, sequins, and small beads.
       
   11. Then you need to make a loop from the fishing line so that you can attach the snowflake, for example, to a Christmas tree. Ready!
       

   DIY paper snowflake for children using origami technique, master class

   The art of origami is multifaceted and complex, but correct instructions using this technique you can do it yourself and it’s enough simple craft, for example, a children's snowflake. True, to be completely frank, the following master class with photos cannot be called made exclusively using the origami technique. In it, for a child's DIY paper snowflake, in addition to the origami technique, you will also use threads and scissors.

   

   Necessary materials for origami children's snowflakes for the New Year

   • thick colored sheet
   • pencil and ruler
   • needle and thread
   • scissors

   Instructions for a master class on children's snowflakes using the origami technique

   1. To begin, we cut out a strip 5-7 cm wide and about 20 cm long. Using a pencil and ruler, we make notes on every centimeter along the length. On top we cut out an imitation of a “fence”, as shown in the photo. In the middle of the resulting columns we draw small diamonds. Then we mark the middle of each centimeter with dots and pierce them with a thin needle.
      
   2. Now we take a ruler and place it on top of the first line dividing our “fence” section in half. Carefully bend the workpiece inward, and then remove the ruler and bend it in the opposite direction. We repeat the same with each section. The result should be an accordion, as in the photo below.
      
   3. We hold the accordion tightly with the fingers of one hand and use scissors to cut out the previously marked diamond shapes in the middle of each section.
      
   4. We take a needle and thread and carefully thread it through the small holes that we already pierced with the needle two steps ago.
      
      

      On a note! The thread needs to be thick so that it holds the finished structure tightly!

   5. When the thread has already passed through all the points, we reinsert it into the first hole to close the structure.
      
   6. We remove the needle and begin to gradually tighten the thread until a tight ring is formed. We tie the thread into a knot, and place a spool on top of the snowflake to straighten it.
      
   7. We form a loop from the remaining thread and our children's snowflake is ready! And for those who want to master the pure origami technique for creating snowflakes, we have selected a video tutorial with step by step diagram below.

   Do-it-yourself openwork snowflake using the quilling technique, master class with photos

   Quilling is the real art of weaving amazingly beautiful crafts and cards from simple strips of paper. Using the quilling technique, you can create truly unique openwork snowflakes with your own hands, a direct confirmation of which is our next master class with step-by-step photos. But the most amazing thing is that by swapping individual parts and adding new elements, you can create several different openwork snowflakes with your own hands using the quilling technique according to one general pattern.

   

   Necessary materials for an openwork snowflake using the quilling technique

   • pencil and ruler
   • scissors
   • glue and brush

   

   Instructions for a master class on openwork snowflakes using quilling techniques

   1. Using a ruler and a simple pencil, you need to draw a sheet. To do this, make 0.5 cm marks along the width of the sheet and draw lines along the entire length. Then we cut out the strips with scissors.
      
   2. To form the rolls you will need an awl. We wind the strip onto it quite tightly, and then let the roll unravel a little and glue the edge to its base.
      
   3. The snowflake will be based on one round element and six drop-shaped rolls. To get an element in the form of a drop, you need to lightly squeeze one edge of the round roll with your fingers. We connect the structure with glue.
      
   4. Now add six eye-shaped rolls to the base. We will also make them from round rolls, but by flattening both edges with our fingers. Glue the “eyes” between the drops according to the template below.
      
   5. Now we need small rolls, so we fold the standard strip in half and cut it into two parts. From each small strip we twist a small round roll. To begin with, you will need six of these elements.
      
   6. We glue small rolls along the edges of the elements in the form of a cat's eye.
      
   7. We roll six standard large rolls.
      
   8. We glue them to the drop-shaped elements, as shown in the diagram below.
      
   9. Now we need six square rolls. We will form them from standard round ones, slightly flattening the sides into a square shape.
      
   10. We glue the squares to the large round elements, having first turned them into the shape of rhombuses.
       
   11. All that remains is to twist a large round roll according to the standard pattern and glue it to the top of our craft. Let the snowflake dry completely and thread the thread through the large roll. Ready!
       

   How to cut a New Year's snowflake 2017 from paper with your own hands, diagrams and templates

   The easiest way to do New Year's snowflake with your own hands is to cut it out of paper according to a ready-made template or diagram. Such simple, but at the same time very beautiful DIY snowflakes are available primarily for children's creativity. However, there are quite complex patterns with which you can make even large and voluminous decorative snowflakes, which in their originality will not be inferior to crafts using the origami or quilling technique. Do you want to know how to cut a beautiful New Year's snowflake out of paper with your own hands? Then you will find a selection of photo templates and patterns for adults and children, as well as video tutorials below.

The New Year is very close and in this life hack we will analyze 140 different schemes, and simply. You will also find several video lessons that will help you better understand all the nuances.

Most likely, each of you approximately knows how to make a round paper snowflake(white or color), but since we need them only during the New Year holidays, the subtleties of production are forgotten for the whole year, so it’s easier to google it at the right time and get to our website to remember everything. I think this is what most of you do, but this article will also be useful for those who want to find something new, something interesting and grandiose, for example, here you will find in the form of deer or cats. And so, let's get to the heart of the matter.

How to make a simple paper snowflake

First, let's look at the types of bases for future jewelry and start with the most standard one. Try it make a beautiful paper snowflake step by step and you will definitely succeed.

• The first thing you need to do is take an A4 piece of paper and cut a square out of it. To do this, take one corner and pull it to the opposite edge, and then bend it, as shown in the figure.

• We cut off the excess and get a perfect square.Now let's bend it back

• Then again

• We turn the resulting triangle upside down, and pull the left edge towards the middle (even a little further)

• Now we overlap the right one.

• It's important that the edges end up flush and not protruding from each other, so try it on before making the final fold.

• We turn the resulting figure over and cut it according to the level of the formed strip.

Second base make New Year's snowflakes out of paper just as simply, the first two steps will be the same, but then, after the formation of the square, there will be differences.

• Prepare a pair in advance by folding it from one corner of the square to the other.

• Now fold the triangle and place it with the top down.

• Fold the right edge as shown in the picture.

• We turn it over and do the same procedure with the second edge. The main thing is that everything is symmetrical.

• Bend the figure in half.

• The drawing must be applied along the edge where it is located inner corner, otherwise you won't succeed make the most beautiful paper snowflake for the window, because it will simply fall apart.

The last third diagram of the basis in order to how to make an origami snowflake out of paper (sheet) begins like the previous two:

• From the square.

• Then we bend the triangle.

• Fold it again.

Now that we have sorted out all the types of basics, we move on to their design, and for this we have prepared as many as 140 different schemes. You will not see such quantity anywhere in one place. It remains to be reminded that if you want make a small paper snowflake(color for example), and not a large one, then just take a piece of paper of a smaller format, and all other actions are similar.

140 instructions on how to make a paper snowflake

We have collected the largest collection of schemes from all over the world. Here you can find options how to do an ordinary snowflake from paper, how to make an openwork snowflake step by step or hexagonal. There's something for every taste ideal type for the holiday.

These are not all of them, you can check out the rest on the Pinterest board.

Now you know how to make a large paper snowflake step by step, but if you like to watch a video reviewer, then especially for you we have selected the most best videos with instructions for creation and now you can watch:

How to make a paper nezhinka video

How to make a beautiful paper snowflake video

How to make a big paper snowflake video

How to make a New Year's snowflake from paper video