Make a children's play complex with your own hands. DIY playground

A children's playground is considered an important element of every modern suburban area if the younger generation lives on the territory. Purchasing swings and similar attributes is not a cheap pleasure.

It is much easier and more affordable to build a playground from scrap materials with your own hands. Let's talk about this issue in more detail.

Design process

The most important condition for creating a playground for children is to carry out the design in such a way that the structure is reliable and also as safe as possible in use.

In addition, when deciding on the construction site of the site, you need to focus on a place with excellent visibility.

In addition, the idea for a playground should not include the installation of wires and various traumatic angles at the site of children’s games. Also, the site should not be located next to a pool or river.

The place for games should be as level as possible, equipped with a soft surface that can minimize the risk of injury during an accidental fall.

When choosing a suitable material for decorating a playground, opt for natural solid wood, which is harmless, practical, and easy to use.

Wood is also easy to process, making it possible to build any structure from it.

By painting wood crafts for the playground in a variety of shades, you can get a visually attractive area for active games your kids.

It is preferable to initially develop the corresponding drawings on a sheet of paper. In the design documentation, be sure to indicate the expected dimensions of the parts that are planned to be placed on the site. Also determine the optimal inclined angle of the children's slide and, of course, the height.

Optimal ideas

When choosing a suitable design idea for a country playground, it is important to focus on childhood, as well as features of the location of the structure. Basically, the main element of the playground is a swing, a sandbox, and a slide.

In addition, you can build a small fairy-tale house and small slides. Simply put, every element of a children's playground should be interesting for kids.

Setting up a sandbox

When deciding on the location of the sandbox, focus on the following points:

• the area must certainly be open, that is, clearly visible;
• It is undesirable to build a sandbox under the canopy of trees to prevent debris from getting into it;
• be sure to take care of high-quality ultraviolet protection;
• Calculate the dimensions so that kids can move around in it as freely as possible.

As for the shape, the optimal option would be a square sandbox, which can be easily created from wood. To make sure of this, the photo of the playground is proof of this.

When choosing a natural wood, choose pine, which is considered a moisture-resistant material that can withstand solar radiation well, as well as temperature changes. Also, the resin in pine is characterized by antimicrobial properties.

The optimal dimensions of the sandbox are 200 cm by 200 cm. First you need to prepare a special area using pegs and threads. Having finished with the markings, you should slightly remove the top layer of soil. Then you can begin arranging the base in order to fill the sand.

Note!

It is preferable to cover the very bottom of the structure with dense building material. The bottom is covered with a cushion of sandy, plastic tiles.

Remember that the use of plastic film is contraindicated, since after precipitation a lot of moisture can accumulate in the sandbox, preventing the sand from drying out.

However, geotextile materials allow moisture to pass through, but do not allow various insects to enter the sand from the ground.

To cover the sides of the structure, boards should be constructed from boards. For convenience, you need to arrange the sides.

The option of arranging the sandbox with a special mushroom-shaped shelter has not been ruled out. This design will protect the structure from moisture and sun.

Decorating a place for children's games

If you are interested in how to make a playground with your own hands and how to decorate it, then remember that the use of expensive materials for these purposes is not necessary. It is enough to use a couple of cans of paint, as well as available materials.

Note!

An excellent design option is a children's playground made from tires, or plastic bottles, wheels.

So that fabulous palm trees can appear on the site, use plastic bottles, and if there are stumps, create paths. Using tires, build various interesting figures for the garden in the form of animals.

Make every effort to ensure that all parts of the playground for children perform a developmental function. This does not require much effort, just a minimum of imagination and desire.

DIY photo of the playground

Note!

The arrival of a child in a family radically changes the usual rhythm of life. married couple. The main attention is paid to the child, and the changes associated with this affect all aspects of everyday life, including relaxation in the country. It is unlikely that a child will be interested in spending time among the beds with cucumbers and tomatoes; wooden playgrounds for the dacha will help correct the situation.

What should a playground be like?

In principle, despite the differences in layout, all do-it-yourself playground ideas for a dacha include the same elements.

• sandbox;
• swing ;
• children's playhouse (can be replaced with an awning for protection from the bright sun or a tent);
• pool ;
• For children's games you will need a table and chairs, it is best to show your imagination and organize the table, for example, from a tree stump.

As for the layout issue, the main focus here is on the safety of children.

Children's summer cottages must meet the following requirements:

• the entire space of the playground should be perfectly visible from the place where parents spend most of their time;

• the territory must be flat, all stones and branches must be removed from it (unless these are decorative elements);
• part of the site should be in the shade;
• to create a cozy environment, it is recommended to fence it off from the street with green spaces;
• if there is a swimming pool on a summer cottage, then between it and the place for children to play there must be an insurmountable barrier (an ordinary fence or green space).

At the planning stage, you can prepare drawings of a playground for your dacha with your own hands or use ready-made options. It is necessary to at least roughly estimate the general location of the main design elements of the site.

Note!
It is not recommended that any communications pass through the territory of the playground (even if at first glance they are well protected).
Children may injure themselves or damage communications during their games.

Choosing material for the playground

You can go the simplest route and just buy plastic elements for the site design. But it’s better to spend a little time and do everything yourself, especially since it’s not that difficult. In addition, plastic does not always fit into the design of the site; only country houses made from block containers look good with it.

It is most convenient to work with wood; in addition, this material is environmentally friendly and fits perfectly into the design. summer cottage. Most of the playground structures can be made from wooden beams and boards.

Building a sandbox

The technology for constructing a sandbox is not limited to digging a hole and filling it with sand, because the sand must always remain clean and dry, even after a heavy rainfall.

• the contour of the sandbox is marked on the ground using pegs and twine (for 2-3 children, dimensions of 1.7 x 1.7 m are sufficient);
• then the top layer 0.25-0.3 m thick is removed, and the bottom of the pit is leveled with a layer of sand;
• a filter material, for example, geotextiles, is laid on top of the sand layer;

• bars with a cross section of 50x5x5 cm are hammered into the corners of the sandbox;
• on the outside, plank boards are attached to these bars;
• the seats will be the sides, which are constructed from the same boards approximately 10 cm wide.

Note!
The main danger for children is poor wood processing.
If the boards are not smooth, then parents will have to regularly pull out splinters, and the holiday will be hopelessly ruined.

The price of such a structure is low, and the sand will remain clean in any weather. If desired, you can equip the sandbox with a lid so that cats and dogs do not leave traces of their activity in the sand.

A children's house is every child's dream

Children have no problems with imagination, so even a small, simple house will give them a lot of fun. Therefore, it is a rare children’s playground in the country without such a structure.

During its construction, the basics of frame construction technology are used, but the process itself is greatly simplified, because the child will not live in this house, its main function is street games. Therefore, all the work comes down to building a frame and sheathing it.

Considering the small load on the frame, a foundation as such is not needed, and small posts are used only to level the future house. The work begins with assembling the beams of the lower trim. In the corners they can be connected in the simplest way (half-wood) and further strengthened with a wooden dowel.

Vertical bars are also installed at the corners of the resulting structure; for additional rigidity, they can be attached to the lower frame with steel corners. After this, the top trim is installed. Any playground for children in the country will benefit from such a construction.

As for the frame itself, thin bars are used for it, which are attached to the upper and lower trim with self-tapping screws or using steel corners. Standard technology frame construction requires cutting grooves in the beams, but in our case this can be neglected.

After this, all that remains is to assemble the frame for the roof from wood and sheathe the resulting “skeleton” with boards or a block house. As with the construction of a sandbox, all wooden surfaces should be perfectly smooth, and sharp corners should be rounded.

Modifying a children's house

Children's playgrounds for the dacha should constantly keep the child in good shape, but the house itself will quickly get boring for the child. Therefore, if possible, it should be combined with other elements of the playground design. Houses are most often combined with sandboxes; in addition, you can arrange a slide.

When building a house combined with a sandbox, beams are simply dug into the ground, and the space on the lower floor is not built up. Otherwise, the construction technology remains the same. Additionally, the house can provide shelves for scoops, toy buckets and other things that are illogical to store in the house.

Going down a slide is one of children's favorite activities; it is logical to equip this very descent from the second floor of the house. Some try to make it wooden (most often OSB boards are used), but wood in this case is not the best choice. Therefore, even a do-it-yourself playground for a summer cottage must be equipped with this little thing that will be pleasant for the child.

In order to protect your child when sliding down the slide, it is better to purchase a ready-made plastic slide. Moreover, there are many options for descents on sale different forms(spiral or straight) open and closed type.

One end of such a descent rests on the ground, and the other is attached to the exit from the house. No additional intermediate fasteners are needed.

About the correct installation of a swing

When children's playgrounds are created at the dacha with their own hands, one of the first questions that arises is about the correct placement and. This is potentially one of the most dangerous elements on the playground, so their design must be approached with special attention.

Any swing must meet the following requirements:

• there should be no foreign objects in the path of movement of the seat with the child;
• the structure must be as rigid as possible and withstand strong vibration amplitudes.

The option with metal stands is attractive, because metal is highly durable. But at the dacha, swings are most often made of wood; a metal structure will require welding, and renting a diesel generator for the dacha will make the playground too expensive.

For the frame of the swing, a beam with a cross-section of 10x10 cm is used. Its length is selected based on the fact that at least 0.5 m of its lower part will be dug into the ground.

For additional rigidity, the side supports are made in the form of triangles and are additionally connected approximately in the middle with a wooden plank. The crossbar can be metal or made of timber of the same cross-section as in the racks.

It is best to equip the seat itself with a backrest, it will be safer. You can use a purchased option or make it yourself, for example, in the form of a bench.

The instructions for making such a seat are quite simple:

• first, a frame is assembled from wooden corners;
• then the frame is simply covered with wooden planks.

It is recommended to use a metal chain to hang the seat. Any rope will fray over time.

Summarizing

The article provides only basic recommendations for arranging a playground. Additionally, you can place an inflatable, open shower made of PVC pipes on the site, and decorate it with funny figures. In general, everything depends not even on the budget, but on the imagination and desire of the parents to please their child.

The video in this article describes some tricks in decorating children's playgrounds in the country.

A children's playground is not a place for orderly and quiet games: children are expected to make noise, run, climb, jump from heights, get dirty and litter. This means that such a playground should be simple, safe and, most importantly, easily changeable, taking into account the changing interests of the child. Take these great ideas from other parents!

DIY playground for children: houses and huts

A house where you can hide from prying eyes is a necessary element of any summer cottage: puppet tea parties will take place here, there will be a secret base and a pirates’ lair, and if necessary, this “home” will turn into a fortress, a tower, a princess’s castle and a magical portal. It is better to build a house without walls, and use thick fabric to protect it from the sun, rain and wind.

Where will we climb?

A simple climbing route can be made from boards or furniture boards and special holds or ordinary wooden blocks. For routes that run close to land, use noodles, flexible swimming accessories made from lightweight foam plastic. They can also be used to make temporary soccer goals or arches for ball games.

Do-it-yourself playground: tires in action

Old car tires are simply invaluable material for arranging a playground. From them you can make swings, ladders, elements for “rope” routes and many other useful things on the playground for children with your own hands.

Sandboxes

A sandbox with a high-stretched awning is both a safe place to play (the child does not risk getting sunstroke) and a ship with raised sails, a house or a hut. If you provide the sandbox with a light lid, then it won’t be afraid of rain either.

Water games

Set up a small area where you can play around with water on hot days. This part of the site can be covered with rubber flooring so that it is not slippery, and then you can simply run a hose here and build several “routes” for water and water mills.

"Board games

Hard childhood, wooden Toys: unusual elements for familiar ones board games easy to cut from wooden blocks. And painted flat stones make excellent tic-tac-toe chips.

Rope routes

Several textile slings stretched tightly between trees at different heights - and future acrobats are happy to conduct their training here.

Drawing with chalk

To prevent paths painted with chalk from spoiling the appearance of your well-groomed summer cottage, select a part of the wall or fence for painting. Paint a board or furniture panel with special chalkboard-effect paint or make the coating yourself by mixing, for example, dark paint with grout for tile joints or latex paint and primer for it (in a ratio of 8 to 1).

Kitchens

Dolls and guests wandering into the light will not be left without a treat: the ideal country kitchen can easily be made from a couple of boards and blocks and an old sink. Organize a simple “plumbing” and “stove”, give the children unnecessary real dishes - and enjoy the peace.

There is no doubt about the need to equip a playground on a personal plot. Difficulties arise only in the process of creating a project with your own hands, selecting material and space in conditions of its shortage. However, if you listen to the advice of experts, this stage of construction of a playground will be easy. And it is not necessary to buy expensive building materials; the site can be equipped using available materials.

What should be on the playground for children

Traditional elements of the playground are:

• slide;
• sandbox;
• swing;
• fungus.

Some of these elements can be combined and form a full-fledged gaming complex. In addition, the site may have:

• decorative elements that will help in aesthetic education(they can be made from scrap materials, for example, such popular swans from tires);
• a bathing container (it doesn’t have to be a swimming pool; a small bath is enough for kids);
• sports complex with ropes and hanging ladders;
• hut or tent;
• maze and much more.

All this depends only on your imagination and the ability to turn your ideas into reality.

Project preparation

The planning process plays an important role in creating a playground because it allows you to decide many important issues.

Selecting a location

It is very important to follow safety rules during the construction of a playground. This also applies to the choice of place where it will be located. In this case, you need to follow the basic rules:

Particular attention should be paid to the covering of the playground. It should be as soft as possible, because children are not immune from falls. The coating must dry quickly, since high humidity negatively affects the child’s health. It is recommended to use a special rubber coating that meets all requirements, but is quite expensive.

Photo gallery: zone layout diagrams

The layout of objects on the site does not have to be detailed with dimensions indicated On the diagram you need to indicate where and which element will be located The diagram may be a detailed drawing There is no need to indicate the projectile sizes on the diagram. The playground layout can be three-dimensional

Dimensions

Before deciding what should be on your playground, it is recommended to decide on its size. They depend on the age of the kids. As a rule, children under the age of 7 need a space of about 9 m2 to play. With age, it is recommended to increase the site (this possibility must be taken into account when planning).

Remember that the equipment and their size must be appropriate for the age of the children who will spend time on this site.

Remember about the so-called safety zones. By default they should be equal to 1 m. However, there are small exceptions to this rule. For example, the safety zone for rolling out of a slide should be at least 1.5 m on all sides. The carousel has a similar area.

Suitable materials

Absolutely any materials are suitable for arranging a playground on a personal plot, even improvised ones ( plastic bottles, tires). However, for key structures such as a slide and swing, it is recommended to use only high-quality material, since in this case we are talking about the safety of the child.

For the playground you can take:

1. Tree. Preferably coniferous species. In this case, you need to ensure that there are no knots, rot or mold, or other signs of damage to the wood. Before assembling the structures, all wooden parts must be carefully treated with a special water-repellent agent.
2. Metal. It is recommended to make all fastening elements and parts of power equipment, for example, a horizontal bar, from this material.

It is undesirable to have plastic products on the playground, since it is short-lived; literally after two years of use, microcracks appear on its surface, which make this product unhygienic and therefore unsafe. The same applies to stones. They should not be on the playground. Even if you need to build a border, then for this purpose it is better to take soft materials, ideally make them from plants.

Construction of a children's playground at the dacha with your own hands from improvised means and materials

Construction of a nursery playground on a personal plot will not be a difficult job if you follow the step-by-step instructions.

DIY sandbox

Making this element of the playground is not at all difficult; just follow a pre-drawn plan:

1. Prepare 10 thick boards 1.8 m long.
2. At the place where the sandbox will be located, remove the top layer of soil (20–25 cm). Make a small indentation in the center. It is necessary to pour drainage material over the entire area, which can be pebbles or crushed stone.
3. Cut grooves along the edges of the boards (two boards are needed on one side), thanks to which they will be attached to each other. For fixation, you can use small bars (about 30 cm long).
4. The two remaining boards will act as benches. Therefore, they need to be attached flat.
5. At the end, the sandbox needs to be painted in any color.

How to make a swing

For load-bearing supports, it is necessary to prepare 6 beams with a cross-section of 5x5 cm. Further work should be carried out in the following order:

1. Tighten the posts with bolts on both sides of the future swing.
2. Connect them from above with a beam, and it is recommended to prepare the nests for this in advance.
3. You can make a ladder on the side, which will serve as an excellent sports equipment for outdoor games.

House made of plastic bottles

This house looks very unusual. And the children themselves can be involved in the creation process.

First you need to make a metal or wooden frame, and then “sheath it” with plastic bottles, which can be fixed with a strong string. In this case, the material must be laid vertically.

While adults are busy weeding the beds at the dacha or mastering the intricacies of landscape design, children need something to fill their free time. A do-it-yourself playground is an opportunity to captivate kids with an exciting game while adults work. Arranging a play area from scrap materials is exciting creative process, to which you can attract those for whom the “clearing of fairy tales” is being built. There are a lot of ideas for arranging such a site from scrap materials, you just have to want it.

Children's playground in the video of the house

Organizing a space for children to play has many nuances.

1. Children should not be in the sun all day, so the best solution is to find a place in the shade of tall trees, behind a high fence or a solid wall of the house. But sometimes it is advisable to pull an awning over the chosen place.
2. The priority is a clearly visible area so that parents can watch their children play and not worry about their health or location.
3. The play area should be organized around one object - a sandbox or a house. It is desirable that everything else be subordinated to one idea.
   

   Children's large playground

4. It is not recommended to allocate fertile land for these purposes, nor is a lowland where a lot of water arrives after a rainfall.
5. It’s good when it is possible to watch children not only from an open garden plot, but also from the windows of a country house or a food preparation area.
6. A ventilated area is not suitable for children to play; drafts can cause colds in kids.
7. Set up a sandbox and other play objects away from the parking area of ​​private vehicles so that the child, while playing, does not get run over.

Children's play area with swings and slides

What objects are used to equip the playground?

Children love to play and compete, overcoming all kinds of obstacles. Play objects are built according to the age characteristics and needs of children.


Children's playground idea

A treehouse with a rope ladder and a slide is preferred by middle-aged children school age. They don’t need a sandbox, except perhaps as a landing place for young “pirates” from a slide adjacent to a house or the upper level of a game labyrinth in the form of a ship.

All children love trampolines. The structure does not need to be made with your own hands, for safety reasons, but it is worth purchasing and installing on the site, even the simplest one.


Children's playground with slide and swings

Children's pool in the yard – great idea, because children love to splash in the water during the summer heat. For kids they use an inflatable tank, for schoolchildren they equip a large tank or buy a ready-made one.

A homemade rope maze for those who like to overcome obstacles can be built together with the children, stretching a net and ladders between closely spaced trees.

Swings are an indispensable attribute of a children's playground. They can also be built with your own hands from available materials, for example, based on a tire and metal chains.


Children's playground with slide with wall

To build a tower for playing in the shade, you can use leftover boards, siding, logs, wooden panels, scraps of plywood and plastic bottles. The main thing is to make it aesthetically pleasing, safe and visible to parents on at least one side.


Playground for children with wall and slide

A tent city is another version of the house that children love to “fence” so much. It is enough to stretch the rope base or cover the hoop with unnecessary fabric and hang it under a tree. Invite children to use old blankets or curtains to make their own tents using clothespins.

A net stretched between two trees is used by children as a football goal, but it should be placed away from the house so that the ball does not hit the windows.


Children's playground made from scrap materials

Typewriter on wooden frame from scraps of plywood can be built as an independent object - with a bench or seats in the shade of the cabin. As an option - a “train” made of barrels or a “yacht” made of painted boards with a steering wheel and a bell.

There are many other ideas, but parents choose what is interesting to children and suits their inclinations and age characteristics. For example, not every child will appreciate a homemade “climbing wall,” but if you install the boards at an angle, younger schoolchildren It will be easier to climb the wall.


Children's playground in the form of a house

Materials for arranging a playground




Advice. Fragments can be placed inside the walls of plastic containers Christmas garland on diodes. Such a delightful glowing object can only be created by an electrician, but the result is worth the effort.


Children's playground with slide

Many interesting structures can be easily made from:

• cardboard boxes;
• plywood boxes;
• plastic bottles;
• car tires (bald rubber);
• awning and mattress fabric, pieces of tarpaulin;
• old car seats;
• unnecessary furniture.

Children's playground with slide

For people with imagination and skillful hands, nothing is impossible. The advantage of homemade objects for a playground is the ability to put into use everything that has been cluttering the site and outbuildings for years.

Crafts from car tires

Tires or old bald rubber are a practical material for constructing playground objects with your own hands.

The easiest way is to build a small sandbox for one child from waste rubber from a “heavy truck”. It is better to place it in the shade, since there is nowhere to place the “mushroom” or canopy. You can replace it with a fabric awning or an old beach umbrella, changing the location depending on the shade.

Children's playground with house and slide

Step-by-step instructions for creating a sandbox:

• prepare an area for a sandbox (preferably on a prepared base - paving slabs or lawn grass);
• mark the circumference according to the tire dimensions and remove the turf layer;
• secure the tire to the ground with stakes or slate nails;
• cover the bottom of the resulting reservoir with a tarpaulin and fill it with sifted sand;
• paint the outside of the sandbox bright color harmless quick-drying paint;
• for the sandbox, organize a lid to cover the sand from rain or the ingress of cat and bird excrement (you can get by with oilcloth with weights at the ends).

Art objects made from tires – original decoration children's playground. In combination with plywood boards, this is the most affordable material for placing recognizable figures in the form of:

• animals and birds;
• fairy-tale characters;
• favorite toys;
• cartoon characters.

The most popular tumbler of two tires different sizes, which are attached one above the other. The voids are filled with plywood. Using paints, they paint the sundress and the face of the toy.

Children's playground with swings

Like a tumbler, it’s easy to make and decorate a matryoshka doll or a bear cub, and place a barrel with the inscription “Honey” next to it. There can be several objects of different sizes. For example, three different bear figures, as in the fairy tale “The Three Bears”. “Masha and the Bear” is a good subject for crafts made from tires, but other ideas are also suitable.

No less popular are white swans, which can be cut from turned-out tires and covered with white paint. On the edges in the center you need to make wings (or leave them without cuts), and on the wrapped end they draw a bird’s face, as in the photo.

Construction of a children's playground with swings

You can easily make a turtle out of tires by covering it with green and brown paint. One tire is needed for the base of the sculpture, the other is cut into 4 parts to make the legs. It is better to cut the head out of plywood and secure it near the base.

Bald rubber is an excellent material for fencing a playground or constructing all kinds of labyrinths and galleries. If you cover a covered gallery made of tires with a camouflage net, you will get a good training ground for little scouts.

Children playground

Where to place plastic containers?

This is a fertile material for exciting games, competitions and structures on the playground, built with your own hands. The straight wooden bridge will certainly be appreciated by young bowling fans. To do this you will need a dozen white plastic bottles filled with water or sand. It is not necessary to knock them down with special heavy balls; a football or basketball ball will do just fine.

Children's playground with house

Another idea for developing coordination and accuracy is to cut the containers to half. They can be hung on wire and thin rope or nailed to a wooden fence. The essence of the game is to hit these containers with a small ball. Not only plastic bottles will do, but also old mugs and tin cans.

Ideas for swings

It is not known why children like measured rocking, but it calms them down and trains the vestibular apparatus. It is known that those people who had a swing as a child get less motion sickness on the road.

Children's playground with awning

Eat different variants design, but structurally they are all similar:

• a reliable, stable crossbar where the swing is hung;
• seat (of different shapes);
• cables (chains, ropes).

For small child A chair without legs is suitable, which will make a comfortable seat. It can be hung on a small horizontal branch of a large tree in the garden. But it’s better to make a support from wood and metal to get a full-fledged swing. A simple plank or an old tire will do for the seat; the main thing is to secure it securely with cables.

Using the same principle, a sofa swing is made, in which the child will enjoy dozing on fresh air after lunch.

DIY playground design

Do-it-yourself fences for the playground

Colorful fences and stumps around the perimeter of the children's playground are another way to cheer up. Most often used for these purposes:

• cutting boards;
• logs sawn into “stumps”;
• colored plastic bottles strung on a rope.

Large playground for children

Plastic bottles do not require painting; the main thing in choosing these parts is the color combination. Wooden fence slats can be painted in rainbow colors. Good idea– give children the opportunity to show their creative inclinations and paint the picket fence themselves. Funny people, animals or anything else - let them draw what they want.

As an addition, let the teenagers paint real graffiti on the wall of an old barn or fence adjacent to the property. Just let them and their parents agree on the sketch of the drawing or inscription.

Children's playground design

Original objects made of logs and wooden blocks

Play areas, sandboxes and areas of the children's playground can be delimited by various elements, including wood. For example, secure and decorate small logs dug in according to the markings. Colored chocks of different heights are a great idea for running along “stumps”, the distance between which should be calculated for children’s steps. They can be dug in one line or under the left and right legs alternately. For children, it doesn’t matter how such a barrier is made, as long as it is comfortable and beautiful.

Children's play area with a large slide

Babies have highly developed possessive instincts, so they often quarrel over the right to own a toy or play area. For these purposes, colored stumps delimit the sandbox into several separate areas - according to the number of children. Low posts are used by children to lay out “paskas” from molds.

Video: DIY children's playground

50 photos of ideas for children's playground designs for children: