Large outdoor Christmas tree made of cones. How to make a Christmas tree from fir cones with your own hands with photos and videos

You will need:

Pine and fir cones;

Scissors;

Thick cardboard;

Decorative berries and birds (or any other decorations);

Hot glue;

Low wide vase;

Artificial snow in a can.

First of all, decide on the size of the future tree, its width. On a sheet of cardboard, draw a circle of the required diameter (you can use, for example, a plate). Cut out the resulting shape.

Clean the cones prepared for creativity from debris, then sort them by size into three piles: small, medium and large. Place a cardboard circle in front of you, apply a thick layer of hot glue along its edge, then place cones on the glue bigger size wide side to the center of the circle. Fasten the cones together with glue.

Thus, continue to lay out the starting materials in tiers in a circle, trying to make each subsequent tier a little smaller in diameter than the previous one. Remember, larger cones must be at the base of the Christmas tree, medium ones in the middle, and smaller ones at the top. At the very top of the craft, secure one cone vertically.

The Christmas tree is ready, now you can start decorating it. Apply artificial snow to it (it is better to do this outside, since if you apply it indoors, you can stain surrounding objects). Let it dry a little, then decorate the Christmas tree with artificial berries and. The Christmas tree will look very original if the decorations are chosen in the same color scheme.

Once the tree is ready, take a wide vase or flower pot, turn the product upside down and apply glue to the bottom. Glue the cardboard base of the craft to the vase/pot and let the glue dry. The decorative Christmas tree is ready.

What can create a New Year's atmosphere on a par with real living Christmas trees? Cones. Spruce and pine. From such simple natural materials you can make beautiful and stylish decorations for the New Year’s beauty, and even the Christmas trees themselves, and not in mini format. We will tell you further about how to make original New Year's crafts from pine cones and demonstrate everything in detail using the example of four master classes.

Master class No. 1: Christmas tree made from pine cones

By collecting a lot of different cones, you can make a beautiful christmas tree. So that the main thing holiday decoration it looked beautiful and lush, you need to choose open cones, but at the same time strong and intact.

Materials

To create a Christmas tree from pine cones with your own hands you will need:

the cones themselves;
hot glue;
heat gun;
cardboard;
scissors;
tinsel and toys;
flowerpot;
spray paint.

Step 1. Decide on the dimensions of the future tree and cut out the cardboard base with scissors of the appropriate size.

Step 2. Sort all the cones by size and clean them of dust.

Step 3. Start laying out your Christmas tree with pine cones. Lay out the starting materials in tiers in a circle. Start with the largest buds. Attach the tiers to each other using hot glue.

Step 4. At the very top of the tree, secure one cone vertically.

Now your Christmas tree of pine cones is ready. You can simply place it on a table on a cardboard base or leave it standing on the floor. You can hot glue the cardboard onto pre-weighted gravel. flower pot. To make the tree look festive, decorate it with tinsel, toys or candies.

You can make the tree a little unusual. To do this, paint it with spray paint. Choose any paint color, the main thing is that it harmonizes with the interior of the room. You can use berries and small bird figures as decoration.

Master class No. 2: DIY Christmas tree toy from a pine cone

An ordinary cone can be an excellent substitute for New Year's Christmas ball. It will need to be given a little New Year's shine, but even with such decor, such a decoration will look very harmonious on the tree.

Materials

To do Christmas tree toy from a pine cone with your own hands, make sure you have:

the cone itself;
hot glue;
wooden bead;
ribbons;
twine;
scissors;
varnish

Step 1. To make the craft look beautiful, the pine cone needs to be washed well and blotted paper towels and let it dry completely.

Step 2. Take a wooden bead and hot glue it to the base of the pine cone.

Step 3. Cut a small piece of twine, thread the end through the bead and tie the string in a knot. This will be a mount for which the Christmas tree decoration can be hung on the New Year's tree.

Step 4. To make the bump look aesthetically pleasing, you can coat its surface with spray varnish. Once you've covered the pine cone, let it dry thoroughly.

Step 5. Decorate the pine cone with a small ribbon bow. You can tie it to a bead or place a bow on a dot of hot glue.

The original pine cone toy for the Christmas tree is ready.

Master class No. 3: mini-tree from a pine cone

If you don’t have time to make a large Christmas tree out of pine cones, but want to decorate your desk or bedside table with a symbolic souvenir, you can make a small New Year’s tree from just one pine cone.

Materials

To make a mini-Christmas tree from a pine cone you will need:

cone;
small clay pot;
spray paint;
star made of foil or plastic;
brush;
decoupage glue;
rag;
glitter;
hot glue.

Step 1. The first step is to prepare the cone itself for work. To do this, you need to clean it from dust. Then cover the bump with spray paint. You can choose any color, but if you want the mini Christmas tree to look like a real one, give preference green shades. In this case, it was given a festive shine by painting it with dark green paint with pearlescent tints.

Step 2. After painting the pine cone, let it dry thoroughly.

Step 3. Attach an aluminum or plastic star to the top of the miniature Christmas tree with hot glue.

Step 4. To create the effect of the tree's paws being dusted with snow or frost, cover the tips of the cones with decoupage glue and sprinkle silver glitter on top. After the glue has dried, shake off any excess glitter.

Step 5. Place the finished cone into a small clay flowerpot. For reliability, you can secure it with hot glue. Your miniature version of the Christmas tree is ready!

Master class No. 4: DIY Christmas tree cones

The pine cones can make very delicate decorations for the Christmas tree. To do this, it is necessary not only to select beautiful and intact cones, but also to decorate them correctly. In this master class, the cones will be covered with glitter and complemented with transparent decorations, which together will create the illusion of a cold frosty day.

With the onset of annual winter holidays Every family faces a pressing question: which Christmas tree to buy, artificial or natural? It seemed that everything was clear: in order to save forests it was necessary to purchase a fake one. But it turns out that not everything is so simple. After all, a Christmas tree made from artificial materials has a number of flaws.

Artificial Christmas tree from the store

The most important disadvantage is that artificial trees are made from plastic, which over time releases toxic substances, poisoning our body. In addition, after some time, spruce trees made from artificial materials become unusable and are thrown away, which leads to environmental pollution.

DIY Christmas tree: cones

Cones are an extraordinary and versatile material for making crafts. It’s not difficult to stock up on them, especially if there is a forest somewhere nearby. Holders of this gift of nature can use cones for any purpose. After all, with pine cones you can make a gift, decorate the interior, prepare medicine and light a fireplace in cold weather.

Cones are used especially actively during the New Year holidays, because they carry a piece of magic and miracle.

In our article we propose step by step instructions on making an environmentally friendly and safe Christmas tree from pine cones. Such a tree is an excellent option for resolving the issue of choosing a Christmas tree for the New Year holidays.

And most importantly, you can make a wonderful Christmas tree together with little children.

Preparation

Before making the Christmas tree, the pine cones must be prepared for work. If the cones are brought from the forest right before making the craft, then keep in mind that in the heat the cones may open for some time.

To avoid deformation of the product, we recommend dipping the pine cones in wood glue for about thirty seconds and then drying them thoroughly. If you plan to change the shape of the cones, soak them in water for a while, and then change the contours, firmly fixing them with threads.

Method No. 1. Christmas tree made from pine cones, classic version

To make a medium-sized Christmas tree using glue you will need:

Cones.
The basis. It is better to choose cardboard as the base material.
Liquid glue and gun;
Scissors;
Gold paint.

When preparing to make a Christmas tree, the cones need to be sorted by size; cones from spruce and pine will suit you , larches. Before starting work, you need to cut off the petals of the cones. Let's take cardboard as a base and make a cone. It is better to choose cardboard as the base material.

Using glue and a gun, attach the pine cones to the cone. The cones should be glued onto the cone, layer by row. For more convenient application of paint, it is better to choose them in aerosol form. After gluing the cones, we paint the tree, and our craft is ready.

Method number 2. Fluffy Christmas tree

For execution unusual crafts in the form of a fluffy Christmas tree you will need the following materials:

Thick cardboard;
Pine cones;
Glue and gun;
PVA glue;
Christmas tree decorations (beads, sparkles);
Dye.

A cardboard circle is suitable as a base. We carefully place the cones on the circle and glue them to the base using liquid glue and a gun. After the first row is ready, proceed to the next one.

Pay attention to how the cones are located. It is better to fasten all rows with a shift inward and in the form of a triangle. Once gluing is complete, paint your Christmas tree.

Method No. 3. Christmas tree made of plasticine and cones

To work you need to prepare:

Cone;
Plasticine;
Cotton wool;
Braid.

Prepare the base of the Christmas tree from plasticine. Select a cone with open petals and place it on the base. Made from plasticine different flower roll out small balls and attach them to the petals. Cotton wool is an excellent option for simulating snow. Decorate the cone with braid and the Christmas tree is ready.

Method number 4. Christmas tree made of pine cones and puff pastry

This version of Christmas trees will fit well into any New Year’s composition prepared with your own hands.

To make a Christmas tree you should prepare the following materials:

One bump;
Dye;
Flour;
Fine salt;
Water.

To prepare salt dough, prepare flour, salt and water in a ratio of 3:2:1. If desired, you can add paint to the water. Pour water into a container with flour and salt, knead the mixture until smooth. Take one well-opened cone and paint it with spray paint.

Form small balls from the salt dough and glue them into the gaps between the petals of the pine cone. Also use the resulting dough as the base of the Christmas tree.

This year we have a lot of cones, there is something to make a variety of crafts from. Therefore, a tree made of cones for the New Year will be a must. Moreover, it is not at all difficult to make; more effort was spent on decoration, since gluing small beads is not as fun as pine cones.

What will you need for the craft?

Pine cones;
Thick cardboard;
Glue gun;
Regular glue;
Scissors;
Green gouache, brush;
Christmas tree decorations.

While it was not difficult to decide on the base of the tree, I immediately decided that it would be a cardboard cone, but the color of the tree and its decor did not work out so easily. I wanted everything at once: a Christmas tree with pine cones in their unchanged state with gold accents, a Christmas tree powdered with white gouache and decorated with pearlescent white beads. But I still settled on the classic - a green Christmas tree with colorful toys and tinsel. Although, there are still cones, perhaps I will turn some of the above into reality, with a different base, for example, on a conical papier-mâché or bottle.

How to make a Christmas tree from pine cones?

Making a cone

First you need to make a cone out of cardboard. It is advisable that the cardboard be thick, or glue two together. Since the tree will be green, it is also better to take green cardboard so that it becomes one with the cones.

Make a bag out of cardboard and glue the edges.

Trim the bottom to create an even cone. The base of the tree is ready, now it’s time to move on to gluing the cones.

Glue the cones

Warm up the glue gun for 5 minutes. During this time, select larger cones for the first row. Place a bead of glue on the cone and immediately press it to the bottom of the cone. Glue the first row of cones, fitting them tightly so that there are as few gaps as possible. Thanks to the glue gun, the work progresses very quickly.

Glue the second row, trying to place the pine cone between the two from the first row. Of course, because different sizes This is not always possible, but it’s worth a try.

We are moving more and more confidently towards the top, and now the third and fourth rows are ready. If possible, the top rows may be occupied by smaller cones. But somehow it didn’t work out for me; the bumps were almost all the same.

Glue the last row of cones and place one of them on top. But there are also several options here, for example, you can not glue a pine cone to the top, but just a star, a bow, or any other decoration.

Since the choice fell on green color Christmas tree, you need to paint all the cones in the desired color. I diluted the green gouache a little with water and added yellow to make it more bright color, and also as close as possible to the cone. My daughter and I painted all the cones on the tree with a brush, but the process is quite slow. For these purposes the best choice– this is aerosol paint: faster and more effective. Or at least paint the cones before gluing them to the cone. But in this case it is difficult to determine the quantity. But the job is done, the tree is painted green.

Decorating a Christmas tree with pine cones

We started decorating the next day, since the gouache does not dry as quickly as we would like.

My daughter’s beads, which she had worn out for a long time, came in handy as toys. I also glued the beads with a glue gun, but I had to tinker with this little detail. Cones are much easier to work with.

Well, the finishing touch is not very fluffy yellow tinsel, wrapped three times around the tree. This is how the tree made of cones turned out, cute and bright.

New Year's holidays are approaching - time to give and receive gifts, decorate the Christmas tree and decorate the house. Perhaps we no longer believe in the good old man Santa Claus, we don’t expect gifts from him under the tree, but we definitely expect a miracle, especially in New Year's Eve.

A miracle is of course good, but the realities of life dictate their own rules to us. Work, affairs, the end of the quarter and year - all this leaves its mark on the availability of free time, and therefore on preparation for the holiday. If there is very little time left, and you don’t want to give loved ones a soulless purchased gift, then it’s time to think about New Year’s crafts made from natural materials. In this article we have collected for you best master classes from all over the Internet on making New Year's crafts from pine cones.

Rules for working with cones

So, before you start making New Year's decorations from pine cones, you should familiarize yourself with the rules for their use, if you can call it that. There are several rules for preparing cones before using them as material for New Year's crafts, so that the finished product does not deform or deteriorate some time later.

Rule 1. Working with cones is a pleasure, but it is worth considering the fact that the air temperature outside is much lower than indoors, which means that the cones you bring will begin to open. Spruce trees will look like tousled hedgehogs, and pine trees will look like fluffy Christmas trees. If your craft involves the use of closed cones, then dip the cone in a container with wood glue for 30 seconds, then remove it and let it dry. Regardless of the temperature, the cone will always be “closed”.

Rule 2. If you need open fluffy cones for a craft, but there is no time to wait, then in order to open them as quickly as possible, the cones need to be boiled for half an hour and then dried on a radiator. After drying, the cone will become fluffy and will no longer change its shape. Instead of cooking, you can use the oven, placing the pine cones there for two hours, pre-setting the temperature to 250⁰C.

Rule 3. If the shape of the cone is not entirely satisfactory to you, it can be slightly adjusted. For this natural material you need to soak it in water and then tie it with thread. After drying, the shape of the cone will be the same as you gave it with thread.

Rule 4. The buds don't have to be brown. Still, the New Year is a holiday of miracles and an ordinary fir cone can turn from a simple brown one to white or even golden. In general, to bleach buds, you need to soak them in water with bleach (1:1), then rinse and dry. The result is impressive.

So, now that you have familiarized yourself with the rules for working with cones, it’s time to start creating New Year's decorations from this natural material. What can you make from pine cones? Yes, anything! The main thing is to stock up festive mood and give free rein to your imagination. And our master classes will help you navigate a wide variety of options.

One of the main attributes of the New Year has always been and remains the New Year tree. It’s New Year’s because it doesn’t look like the one we saw in the forest, however, if we saw it. A Christmas tree can easily be made with your own hands from ordinary pine cones; fortunately, pine is an unpretentious plant, and therefore grows almost everywhere in our cities. To create such a New Year's craft with your own hands, you will need: thick paper, scissors, old newspapers, glue and, of course, pine cones.

See more ideas Christmas trees:

In the pre-New Year bustle, sometimes there is no time for the Christmas tree: crowds in stores and at specialized Christmas tree markets discourage anyone from purchasing a fluffy beauty. However, in order to have a real Christmas tree in your home, you don’t have to buy it. From this article you will learn how to make a Christmas tree with your own hands from scrap materials. We have collected for you more than 20 […]

Cute Christmas tree decorations are made from ordinary pine cones and pieces of felt. You will also need scissors, glue, paint and plasticine or a wooden ball. Such birds will look great on a New Year's tree or they can be given as a souvenir to people close and dear to you.

Making New Year's crafts with kids is a pleasure. Firstly, the child is busy with an important task together with his parents, secondly, we are all pleased to create something new, and thirdly, such a craft may well become a New Year's souvenir for grandparents, and maybe even for Santa Claus himself. To make Santa's magical helpers you will need: pine cones, pieces of felt, scissors, glue, plasticine or a wooden ball for the head.

You can actually make a variety of forest creatures out of cones, and it doesn’t have to be a hedgehog. In this master class you will learn how to make chanterelles from pine cones and felt.

It would be strange if among our master classes on making animals from pine cones there was no hedgehog. Fluffy pine cone appearance It exactly resembles a prickly forest eared animal. You will need: cones, felt, scissors, glue.

To make squirrels from cones with your own hands you will need: cones, felt, scissors and glue.

#7 Crafts from pine cones for the New Year: make a ball with your own hands. Scheme

You will need foam ball, cones, ribbon, glue.

With the onset of cold weather, it becomes increasingly difficult for our smaller brothers to get food for themselves, so we should take care of them, especially given the cold weather in our area. Great idea Crafts from pine cones will become a bird feeder. Take a pine cone, generously spread it with honey or condensed milk, and then dip it in a container of “bird treats.” Hang the feeder on a tree in the yard and watch the birds happily taste your treats.

See more ideas:

No matter how old we are, the New Year remains for us a little fairy tale awaited by the whole world, a little hope for something new, white and clean, with a winter atmosphere, snowballs, the smell of tangerines and fireworks. To the bright, magical family holiday Every family begins to prepare in advance, planning guest lists, menus, gifts for loved ones. Home decor, decoration […]

#17 Decorating the house with shiny pine cones: getting ready for the New Year's party

If you are planning a serious adult party, then you should not decorate the interior with fairy-tale elves and decorative owls. It's better to use sparkles and add sparkle and chic to New Year's Eve!

Any cone, both pine and spruce, is suitable for a hedgehog, but it must be fluffy. We told you how to do this at the very beginning of the article in the rules for working with cones.

Cones are a fairly universal material, and if you have already grown up from chanterelles, squirrels and hedgehogs, then you can decorate this natural material using ordinary paint. Looks very stylish.

What's a Christmas tree without pine cones? From a seemingly ordinary pine or fir cone you can make an incredibly cute Christmas tree toy that will fit perfectly into the overall decor. You will need: pine cone, glue, bead, ribbon and thread.

The eagle owl fits perfectly into the New Year's theme: it doesn't sleep at night, stays with us for the winter, and of course this particular bird was Harry Potter's pet. Small eagle owls can be used to decorate an interior, a Christmas tree, or give to loved ones as a souvenir.

You may like:

The New Year holidays are approaching, which means that very soon a forest guest will appear in almost every home in our country. Some people prefer to bet artificial Christmas tree, some use a real forest spruce from a Christmas market, while others just limit themselves to pine branches. However, this is not so important, because the most important feature of the New Year tree is the toys. Since ancient times, people in [...]

#24 We continue to make birds from pine cones: DIY New Year’s craft “Owl”

Cones make excellent birds, including owls. On New Year's Eve there must be at least one owl on the tree - there must be someone who will definitely not fall asleep and will follow Santa Claus: exactly how he gets into the house and how he leaves gifts. Making a night guard is quite simple. You will need: a pine cone, glue, pieces of fabric, beads for the eyes.

Children, even the most restless ones, will happily take on the painstaking work of creating a New Year's penguin, but on one condition: parents must take part in the process. Spend a few hours together and end up with a sweetheart New Year's craft- what could be better!

If you are not satisfied with the banal decoration of candles and vases with pine cones, then this original picture should suit your liking. You will need: cones, frame, ribbons, scissors and double-sided tape or glue.

Decorating the New Year tree is one of the main activities in preparing for the holiday. I want to decorate the forest beauty in a special way. The most special tree will be the one with hand-made toys in which the soul and warmth of the creator has been invested. Our step by step wizard The class will help you make a simple Christmas tree decoration from ordinary pine cones with your own hands. If there are children in the house, be sure to involve them in the creative process.

Great idea for New Year theme will be a craft made from pine cones in the shape of a deer. It's quick and easy to do, and looks very cute. By the way, such a craft can be hung on a New Year tree as a hand-made toy.

A great idea for a New Year's craft made from pine cones would be a snowman. And not just an ordinary snowman, but an athlete snowman who prefers New Year holidays spend on skis. By the way, take note of this character’s idea and be sure to winter holidays spend time with the whole family somewhere on a hill!

You can decorate with the help of cones New Year's table, using this natural material as a stand for cards with a seating plan. Suitable not only for a party with a large number of guests, but also for a quiet get-together. The main thing is to create a New Year's atmosphere.

Even if you have big Christmas tree, miniature Christmas trees made from cones will not be superfluous, because the tree is only in one room, and in others it is quite possible to create festive atmosphere miniature copies.

If you still decide to decorate your house with miniature Christmas trees made of pine cones, then here is another step-by-step master class.

If you like christmas balls with snow that you can shake and create a real winter blizzard, then you will like this craft. The cone resembles a Christmas tree, so in a jar with snow it looks like a real forest beauty in miniature, which is waiting for a kind old man in the forest.

You may be interested in:

Preparing for the New Year is sometimes even more enjoyable than the celebration itself. The whole family, including the youngest residents, can take part in the interior decorating process. Decorate an apartment or house New Year's holidays most possible different ways, but in Lately New Year's wreaths, which are better known to us from the romantic Christmas films of Hollywood, are very popular. However, fashionable […]

Another great option for a miniature Christmas tree for decoration or as a souvenir would be this craft made from pine cones.

If you don’t have the time or desire to tinker with a fluffy wreath, the master class for which you saw above, then you can make an incredibly simple wreath of pine cones, the production of which will take much less time, but it will look very cool!