Make a women's leather bracelet MK. DIY leather bracelets: how to make an extraordinary accessory

We will need:

About 2 meters of leather cord (2 mm) (the length depends on how many times you want to wrap the bracelet around your wrist. 2 meters of lace will allow you to make about 4 turns of the bracelet),
1.5 meters of leather cord (1 mm),
6 meters of leather cord (1 mm),
About 140 small beads with a hole large enough to thread a narrower (1mm) leather cord through,
beautiful button(optional).

Of course, you can use leather laces of other diameters, the main thing is that they can be threaded into beads.

So let's get started! The bracelet on the right (photo above) does not have a button and will be fastened with a loop at one end and a knot at the other.

First, take a 2 meter long cord and fold it in half.

Now we take a cord 1.5 meters long and tie it in a knot around the loop as shown in picture 1.

Then we lean the short end of the lace (on the left in the picture) against the center, and tightly wrap the long end around the base of the bracelet in order to make a beautiful beginning.

It is very important to work carefully as the laces are very thin and can break. You can first practice strength on some other lace.

Now tie a knot as shown in picture 2.

Then we put all the beads on the long end of the cord (the one with a diameter of 1 mm) and tie a knot at the end so that the beads do not move out while working.

As for the short tip (the same cord with a diameter of 1 mm), it can be cut off or inserted into the first bead if the hole size allows.

So, let's move our first bead up.

Now we take a 6-meter cord and cut it into 2 identical parts (DO NOT CUT). For example, they can be wound into balls, as shown in picture 1 on the left.

We tie a knot (from a 6-meter cord) directly under the first bead.

Well, now you need to carefully follow the steps shown in pictures 4 to 14

At first there is a chance of doing something wrong, but don’t worry, you need to carefully undo what you’ve done and start again with the second bead. Or maybe everything will work out right away.

It is very important to alternate weaving “above” and on the next bead “under” the thin cord in the middle (which has beads). It is necessary to maintain alternation in order to secure the beads well and beautifully between two thicker cords (2 mm wide).

Well, do you see the alternation?

You can easily get the hang of it because this process looks more complicated than it actually is!

Don’t forget to periodically wrap the bracelet around your wrist to see its length.

To finish, place 1 end of the braided lace in the center (for example, the left one), and wrap the other end around all the other laces. Then we make a knot as at the beginning of the bracelet, shown in picture 4.

Now we take all the ends and tie them into a large knot. Pull it tight. Depending on the length you need, you can skip a little space and tie another knot and another, as shown in the last picture.

If you are using a button on the other end of the bracelet, the distance between the two knots will be the button loop.

OK it's all over Now! Your hand-woven leather bracelet is ready!

http://bellezza4u.ru/accessuari/item/61-kojanii_braslet_svoimi_rykami.html

It's time again to stretch our hands a little, exercise our imagination, tap into the creative spark within us and make something with our own hands. And not even something, but trendy leather bracelets. What's great about these bracelets is that you can wear them with anything, especially ethnic clothing. In addition, there are a huge number of different forms, colors and options, so you can always choose a leather bracelet to match your outfit. Well, it’s not even worth describing how good they look on the hand.

So, let's get down to the actual process of creating bracelets.

DIY wide leather bracelets

You will need:
. Leather straps (strips of leather with a clasp at the end)
. Ribbons
. Metal spikes
. Threads
. Super glue

You can simply glue a narrower piece of tape onto the bracelet and add some spikes.
Or you can attach spikes and entangle them with a bright thread (yellow, for example). You will get 2 wonderful bracelets.

A couple more options creative process"How to make leather bracelets"

You will need:

- leather laces - you can use thin leather ribbons
- floss threads
- glue
- scissors
- scotch
- needle

Step 1
Measure your wrist by wrapping the leather cord loosely around your wrist twice, then add an extra 10cm to tie it. Glue one end of the leather cord to the surface so that it does not move and, stepping back about 5 cm from the edge, drop a drop of glue onto the leather cord and attach your first color of floss to it.
Step 2
Continue winding the floss around the leather cord until you have a strip of the width you want, then cut off the rest of the thread, securing the end to the bracelet.
Step 3
Take a different color of thread and do the same procedure with it again. Continue doing steps 2 and 3 until you have done about 5cm of different colors.
Step 4
When you're done wrapping, take the needle and pass it under yours. If you want, you can add a small drop of glue to make sure your floss doesn't come off.

Step 5
Tie the end of the lace that is closest to the wrap around the other end of the lace. Make a simple knot. The knot should be strong, but the leather lace should pass freely back and forth and slide through it.
Advice: Before tying a leather lace, wet it a little and remember it to make it softer and easier to tie. This will also help make a strong knot.
Step 6
Leaving at least 10cm on the other side, repeat steps 1, 2, 3, and 4 again.
Step 7
When you have finished wrapping the other side of your bracelet, re-tie the loose end on the other side.

You will get wonderful multi-colored bracelets.

Well, now more complex options:
You will need everything you have on hand: leather laces and strips, beads, chains, glue, threads.

1. Bracelet with beads. Take 2 laces, place beads between them and attach the beads to the laces by passing threads through them and entangling the laces with these threads. In the photo: the first from the wrist.

2. Multi-strand bracelet with beads. Just grab some suede threads, a couple of end clasps, and seed beads that have holes for your threads to fit through. String your beads and beads onto strings, tying the thread after each with a knot. Secure the fasteners at the ends.

3. Braided bracelet with beads. It is too easy way. Just start braiding your hair with suede threads, adding beads here and there, secure the clasps at the ends, and you're done. This woven bracelet can also be made with a chain. Just add a thin chain instead of one of the threads and start braiding.

Don't stop your imagination. You can make your own options and variations. The main thing is that you don’t have to buy such wonderful bracelets in the store.

DIY leather bracelets (video)

Outdated jacket old bag or a piece of leather lying around in the bins is an ideal material for creating stylish jewelry.

In this master class you will learn how to make a leather bracelet with your own hands from a tin can and a small piece of soft leather. For decoration, you can take any stone that you have, buy a natural mineral, or use an imitation made of plastic or glass. Here amber plays the role of a decorative element.

Preparation of materials and tools

To transform a tin can, a damaged piece of amber and several small pieces of leather into a massive and stylish women's bracelet, you will need the following tools and materials:

pieces of soft and thin genuine leather;
amber;
transparent universal glue “Dragon”;
canned food tin;
metal scissors;
scissors;
ball pen.

If you don't have a stone, you can make one from polymer clay, for example, by .

Step-by-step master class with photos

First, make a metal frame for your leather bracelet. Tin from a can of canned olives or olives is best suited; it is thinner and at the same time holds its shape well.

Using tin snips, cut out a rectangle and trim the corners, rounding them.

Frame it oval shape. Try it on your hand and, if necessary, reduce the length.

Make a backing from the wrong side. For this ballpoint pen trace the outline of the frame on a piece of leather. For this stage, you can take material with defects, for example, with uneven coloring or rougher material.

Using scissors, cut out the backing, allowing an allowance of one centimeter around the entire perimeter. Spread the entire back side with transparent universal glue “Dragon” or “Moment”.

Glue the backing to the inside of the frame. Fold the seam allowance to the outside, and make folds from excess leather at the ends. Please note that the leather, lubricated with glue, stretches well. Therefore, at the edges of the blank for the leather bracelet, stretch it slightly.

Let the glue dry for a couple of minutes and use scissors to trim the folds as close to the plane of the bracelet as possible.

Decorate a women's bracelet with fine beautiful skin and stone. To do this, take a segment three times larger in area. Apply clear glue generously to the middle and to the stone.

Mark approximately the center point on the product and start gluing the skin from this place. Place amber in the same place. While the glue is still wet, use your fingers to form folds around the stone. Cover the chipped area with drapery.

Add glue to the remaining surface and glue the leather decor along the entire outer surface of the bracelet.

Shape the decorative drapery to your liking. Fold the edges inward. If possible, try to keep as few folds as possible on the inside of the product. Trim off the excess.

After a couple of minutes, cut off as many folds of leather as possible from the inside of the bracelet.

Cut out another piece for the back side. Measure the workpiece by placing it against the surface.

Apply glue to the entire surface of the part.

Carefully glue the part to the inside, thus hiding the edges that are folded on the outside. Start gluing from the ends of the product.

Once the glue has completely dried, give your leather bracelet its final shape by pressing it into a small oval with your hands for a few seconds.

A thin metal base will help maintain its shape and add elasticity to the structure. Using this technique, you can decorate women's leather bracelets with your own hands and other elements, for example, shells, sea stones and glass, metal parts and even interesting beads. In any case, your masterpiece will be unique.

We also have a tutorial on how to make a leather bracelet with your own hands, but it uses a cord weaving technique. If you still have some skin left, decorate for yourself or as a gift. It’s very exciting to create; the end result is always an unusual souvenir or jewelry.

Other instructions for making jewelry in different techniques. Join us on in social networks, to receive news about publications, look at crafts and other participants, and sell yours.

Today, many different types of leather bracelets are sold. There are models for men, women, and unisex. Some jewelry is fastened with a button, others are tightened with a cord. Colored beads and beads are used as decoration; pieces of leather of different quality and color are selected. Finishing elements can be woven into the bracelet or attached afterwards.

Options to create beautiful bracelets a bunch of:

hemlines;
in boho style from beads;
with various stones;
with metal inserts and etc.

How to make a leather bracelet with your own hands for beginners?

Pieces of high-quality leather, even small ones, can serve as material for making several bracelets. It takes a little material, the main thing is the quality, color, texture and imagination of the creator.

Important! Leather for a woven bracelet that will be worn for a long time should be of medium density - up to 1 mm. You need to check that its reverse side does not paint your hand.

Materials and tools

In addition to leather, you need to prepare finishing materials, fittings and tools:

Buttons for the fastener and a device for its installation.
The waxed thread will be the basis for stringing the beads.
Thread or leather laces are useful for making fasteners other than button fasteners.
You can cut the stripes and motifs of the bracelet with a very sharp knife. It’s good if you have a high-quality disk one, but any other one will do for leather crafts. The main thing is that it is very sharp.
It is important to use a special backing as a basis for cutting, but it will not quickly dull the knives for cutting leather.

Reference! Some leather elements will need to be glued. Glue is used like Moment for leather or simple shoe glue.

5 stripe bracelet

One of the easiest options to make is a bracelet woven from leather strips.

The materials used are the simplest:

a strip of leather equal in length to the circumference of the arm, in width - the number of strips multiplied by 0.5 cm;
sharp knife for cutting leather;
beads and beads for decorating a wicker bracelet.

All production can be divided into several stages:

If the leather is rough and thick, the three-stripe weave will the best option. For thinner skin, you can cut five or six strips.
You need to weave according to the pattern. For weaving from large quantity strips of leather need training, after weaving a certain amount, experience will come, your hands will get used to weaving the components of the bracelet, strips and appearance it will turn out quite neat.
A woven bracelet can become the basis for further decorating it with beads and seed beads. The design for decoration is selected as the author’s imagination dictates.
A metal button can serve as a clasp.

Leather bracelet with carved pattern

Simple bracelet– leather of greater thickness, from 1.5 mm, is suitable for its manufacture.

Materials for production:

a strip of leather equal in length to the circumference of the arm plus an allowance for the fastener, the width depends on the chosen design;
paste for drawing, easily removed with machine oil.

Manufacturing is simple, but requires great care:

apply a pattern to the skin;
cut out motifs with a sharp knife;
Install a metal button in the center of the fastener.

Depending on the design and quality of the leather, the bracelet can be single-layered or placed on a second layer of leather in a contrasting color.

Braiding metal rings

Your favorite thin metal bracelets can be the basis for a new wicker product.

For the manufacture of need to prepare:

several metal bracelets - from 3 to 6 pieces;
waxed leather cord, you can buy it in the accessories and applied materials department.

Manufacturing will require a little patience and time:

put bracelets on the fingers of your left hand so that the distance between them remains unchanged during work;

metal products must be braided one at a time, maintaining the same braid pattern;
Secure the ends with glue.

All handmade decorations carry the warmth of hands and positive energy creator Best gift for friends and acquaintances cannot be found.

The accessory market offers us a large selection of style elements, but how to make a leather bracelet with your own hands? Both leather and its substitutes occupy great place in modern choice of material. It does not require processing difficulties and effectively complements the image. Leather is used in bracelets for both men and women.

Bracelets Styles

We offer you to consider several examples of bracelets and instructions for their manufacture.

Leather thin strips and waxed leather cords are sold in stores by the meter. Take the required amount and choose colors. Cut the strips into pieces and secure with cords. Collect different types cords into one bracelet. Add metal embellishments or beads.

Take a long cord so that it circles your hand several times and secure special fasteners at the ends.

Note! The caps can be glued using super glue or hot glue from a hot glue gun.

Braid several blanks of metal bracelets with a leather cord like a wicker basket. The scheme of work is very simple, the master class will not take much time.

The simplest type of woven leather bracelets is the “pigtail” method. You can weave different types of laces and strips. Regular brown and black colors are suitable for various styles clothes, more colorful ones are chosen for bright summer looks.

An interesting version of weaving with leather cord and beads has recently become fashionable. For such bracelets, the way of imagination is open in terms of combining the colors of threads and beads.

Delicate cute lacings intertwined with beaded thread are tied with dense bright denim threads.

Take beads from 4-6 mm and intertwine them with threads between two leather cords. To help with this you will need a needle.

Wide model

More complex, but still affordable way create your own individual accessory - manufacturing wide bracelet like a strap or wristband.

Fasteners can be buckles or buttons. Spikes and rivets are glued or attached to a thick piece of leather, and holes are made through which cords can be threaded for decoration.

We find suitable material in the form of pieces from old jacket, bags or boots. The buckle clasps can also be taken from the straps of old bags, the buttons are purchased new.

It is enough to secure thick leather with buttons, press out the design, paint it with paints, paste it with half beads, and embroider it with threads.

Thin leather and suede are glued onto steel or plastic blanks for bracelets. They are sold in hardware stores and can be of various widths and sizes.

Most often, needlewomen use this material for bead embroidery. It is not necessary to make bracelets from solid fabric; small pieces of leather can also serve as material for creating jewelry. Attach geometric shapes or cut out leaves using leather glue. A leather flower, attached with a button on a strip, becomes a glamorous detail in your appearance.

Men's options

Common associations of a men's bracelet as rock attributes or an addition to the impressive image of bikers. However, it is still relevant to add fittings, metal inserts with engraving of a name, club or ornament, spikes and rivets to such accessories. But in contrast to the informal movement, leather bracelets entered the style of the urban man. Many stars wear such jewelry, and they look no less masculine.

Some types of bracelets become purely men's work. From thick calfskin gentle hand girls find it difficult to cut out any detail. But such bracelets will look very impressive with some folk ornaments, which is very fashionable now. Although the task is simplified if it is possible to glue the embroidery on top of the leather, and the material itself will act as a strong base.

Leather jewelry has probably existed since the time when people first learned to sew clothes from this material. Even very simple belts, bracelets, earrings and pendants made of leather or leatherette look stylish. It’s not difficult to make leather bracelets with your own hands; there are a lot of options for such accessories, and besides, you can always come up with something of your own. This will be discussed in our article.

History and myths

Making leather jewelry is quite simple. You can wear it for a long time, it is very easy to care for, and in addition, it is durable. People learned to make leather bracelets with their own hands a long time ago. Such decorations were especially popular in northern countries; mythical significance was often attributed to them.

Important! Northerners wore and still wear wrist jewelry made from animal skin. But some Indian tribes, as well as residents of remote islands and isolated areas of Africa, until recently had bracelets in use even from human skin- and this was considered a symbol of courage and victory over the enemy.

Men prefer leather bracelets more often than the fair sex. Until a certain time, it was generally considered a purely masculine decoration. However, modern ladies lead a very active lifestyle, play sports and quite often take on responsibilities that until recently were considered masculine.

So why shouldn't women wear such jewelry? Moreover, a leather bracelet can be not only brutal, but also quite elegant, richly decorated with rhinestones or beads. Of course, such accessories are not suitable for every outfit. But if you prefer a sporty or ethnic style, why not?

What types of bracelets are there?

No one has yet proposed a generally accepted classification of this type of leather jewelry. However, they can be divided according to the manufacturing method:

from a single piece of leather or leatherette;
from pieces;
wicker

In turn, accessories made from a single piece can also be different. For example, you can make a solid bracelet or an openwork one:

The second option takes longer, and in addition, special care is required.
Solid bracelets can be with overlays, with embossing, with metal inserts - in a word, there is room for your imagination to run wild.

Before you sit down to work, think:

what exactly do you want to get;
what materials do you have.

The most important thing is the skin. You probably already have a piece, since you came up with the idea to make a decoration.

Important! Scraps from old jackets, boot tops are suitable, even a frayed belt is still suitable for smaller accessories. See if you have a relatively large piece or only pieces left - the shape of the future product will depend on this.

DIY leather bracelet - master class begins

The purpose of any decoration is to make your appearance more impressive. This means that the accessory must, first of all, look good. This largely depends on the material. The skin should be:

clean;
no abrasions;
as evenly colored as possible.

Therefore, first you need to cleanse the skin. Since you need a small piece, the simplest recipe will do. You will need:

water;
soap;
ammonia;
cotton swab.

Dissolve about 10 g of soap in half a glass of water. Add 1 tbsp. l. ammonia. Wipe the piece with this mixture and let it dry.

Scuff marks and uneven paint are also fairly easy to deal with. To do this, you need to look at the nearest shoe store and see what leather dyes they have. They usually come in aerosol packaging, sometimes in plastic bottles with a brush attached. Renew the piece and you can start making leather bracelets with your own hands.

DIY leather bracelets for men

Perhaps this is the simplest version of leather jewelry. It is made from a rectangular strip. You need to prepare:

a piece of leather;
hammer;
set of buttons;
set for inserting buttons;
tape measure;
ball pen;
ruler (preferably iron);
square;
cardboard;
pins;
thick needle or awl.

Important! The number of buttons depends on the width of the decoration. You can make the clasp with one button or two or three. In addition, you can decorate a men's leather bracelet with one or two buttons.

Sample:

Measure your wrist circumference. Since the fastener will have buttons, you need to add another one and a half to two centimeters so that the edges can be overlapped.
Determine the width of the future product. There is no need to leave any allowances here. The optimal width of a men's bracelet is 4-5 cm, but it can be more.
Draw a rectangle on the cardboard according to the measurements.
Cut it out (it is better to do this using a metal ruler with a sharp knife).

Important! For the template, it is better to take thin but rigid cardboard. This is especially important if you are planning to make an openwork product.

We cut the bracelet

Now the template needs to be transferred to the skin:

Place the skin outside down.
Apply the template.
Trace it with a ballpoint pen.
Cut with a sharp knife.

Important! You can cut either using a template or using a ruler. In principle, you can do without a cardboard pattern if the piece of leather is smooth and its corners are straight (for example, a fragment of an old belt).

Buttons and what to do with them

It’s not difficult to figure out the buttons – you can immediately see which part should be on top and which on the bottom. In principle, you can go to a studio or sewing store, where they probably have a device that allows you to do this in a few minutes. But there is nothing difficult about putting these elements on a men’s leather bracelet with your own hands.

Important! In the set for inserting buttons you will find a black circle - it is placed under the product so as not to scratch the table. There is a piece of rod there - without it you cannot install the button. In general, it is not difficult to understand which part is needed for what.

We pierce holes

You already have the blank, now you need to figure out where to make the holes. To do this, put the bracelet on your wrist and make marks. Tailor's pins are best suited for this purpose:

Insert one pin from the edge of the workpiece that is on top.
Insert the second pin into the corner below.

The most common office hole punch makes perfect holes in leather.
If it is not there, you will have to do it with an awl or a gypsy needle.

In any case, the hole should be the same size as from the hole punch.

We put buttons

Now - the most important thing. Each button consists of six parts - two main parts and four attachments. You need to start inserting from the part that will be on top. The upper main part looks like a mushroom - it has a cap and a short stem:

Insert the leg into the hole so that the cap is on the outside.
Put on the attachments - the one with the thread should be on top.
Clamp it all together with pliers or a special press.
Insert the bottom of the button in the same way.

Important! The cap of the button should align with the recess in the nozzle.

Decorating the bracelet

Actually, a men's leather bracelet made with your own hands is ready. But if you wish, you can decorate it. For example, insert a couple more buttons in different places. You can do it differently - decorate the decoration with a simple overlay geometric pattern.

You will need:

multi-colored pieces of leather;
leather glue;
scissors;
ball pen;
ruler.

Make several elements - for example, brown triangles and white squares. It is best to draw them with a ballpoint pen on the wrong side. Cut out the elements. Place them on the bracelet, and then glue them with leather glue or universal glue according to the instructions.

Wide bracelet

The technology for making a bracelet 10 cm wide or more is no different from that used for strip decoration. But you need to make a pattern. The pattern for the lower part of a narrow sleeve is most suitable.

Important! You can rip open an old shirt or blouse and make a template.

Features of making a wide leather bracelet:

The pattern will be in the form of a trapezoid.
The buttons should be placed at equal distances.
Of course, you will need more of them - from 5 to 10.
You can insert eyelets and make a lace-up decoration. True, it is difficult to do such work with a hole punch and pliers - you need a press.

Women's bracelet with chain

Manufacturing women's jewelry– the process is somewhat more complicated, but this activity provides simply unimaginable opportunities to show imagination. For an elegant, yet very simple, women's bracelet you will need:

thin strap;
long chain;
scissors or knife;
press or hole punch.

To make a leather bracelet:

Cut 2 strips of the same length. The size does not matter; the width of the decoration itself will be adjusted by the chain.
Mark the holes at both ends of each strip using pins or a ballpoint pen.
Make holes with a hole punch or awl.
Pass the chain through both holes of each strip.
Place the bracelet on your hand so that both strips touch your wrist.
Adjust the length of the chain - if necessary, rearrange the lock and remove excess links.

Important! This DIY leather bracelet will look very impressive if you give each strip the shape of an arrow.

DIY braided leather bracelet

Simple but spectacular decoration. For such a bracelet you will need a strip of leather approximately one and a half times longer than the circumference of the wrist. Think in advance how your product will fit on your wrist:

lace-up;
on a buckle;
on a button or button.

To weave a bracelet you will need:

strip of leather 2-5 cm wide;
sharp knife;
metal ruler;
ball pen.

Option 1

A three-strand bracelet is woven like a regular braid:

Mark the wrong side of the strip, dividing it widthwise into 3 equal parts. It is better to draw with a ballpoint pen on the wrong side.
Cut the strands, not reaching about 1 cm from the edge.
Place the strip right side up.
Take the left strand.
Pass it over the second and under the third.
Take the strand that is now on the left.
Pass it over the second strand and under the third
Weave this way until there are 2 cm left to the end.
Sew the strands together to create a continuous fabric.
Attach the clasp.

Important! If the bracelet will be held on by a button, make air loop made of leather or thick threads. In the same way, you can weave a belt or leather bracelet with your own hands from any number of strands.

Option 2

A decoration in which only the middle strands are intertwined, while the outer ones remain straight, will look very impressive - they can be made a little wider than the middle ones.

Master class on making a leather bracelet:

Divide the strip into 5 parts.
Cut in the same way as in the previous case, that is, leaving an uncut piece of approximately 1 cm.
Draw the second strand from the left over the third and under the fourth.
Don't touch the last strand.
Draw the strand that is now second from the left in the same way as the previous one.
Braid until there is 1cm left to the edge, then sew the strands together. The extreme ones can be shortened a little.

Option 3

It is not necessary to make a braid along the entire length of the bracelet. You can first braid a braid 2-3 cm long, then leave a gap, braid the braid again, etc.

Option 4

You can make a braided lace bracelet. Weave the decoration. Make holes along the edges - one or two at a time - and insert a thin leather cord.

How to make an original leather bracelet with your own hands?

Women's accessories differ from men's in their elegance and the ability to use the most different materials For decoration.

Bracelet with voluminous decorations

If desired, you can make a leather bracelet with voluminous flowers. For this you need:

strip of leather;
pieces of leather of the same or a different color;
leather glue;
scissors;
sample;
pan.

How to proceed:

Make a bracelet from a strip of leather and attach a clasp to it.
To decorate your product, cut out petals - circles or ovals of the same size - from pieces of leather. It is better to do this according to a template.
Place the petals inside out on a clean, cold frying pan. Start heating the pan slowly. The petals will bend. As soon as they accept the required form, carefully collect them.
Combine 3-4 petals into a flower, and then glue or sew on the bracelet.

Important! The middle can also be made from a piece of leather, a bead, seed beads, or even a colored feather.

Openwork bracelet

It is made almost the same way as a strip bracelet. Only the strip is something like leather lace.

Important! To make such jewelry you need a very precise template - strictly according to the size of the bracelet.

All sorts of holes are cut into the template - flowers, petals, Celtic weave, and basically anything you like. Then the template needs to be placed on a strip of leather, fastened so that the pattern does not move out, outline future holes and carefully cut out. The clasp can be made with buttons or lacing.

In this article you saw a master class on making a wide variety of leather bracelets for men and women. Use these basic ideas, try them out in practice, and then show your imagination and improve your jewelry, and accordingly, your image.

home > Personality