Paper stars instructions. DIY paper star (diagrams, templates)

Stars have always played an important role in our lives. Stars give light, warmth, show direction. Some are born under a lucky star, some make a wish when the star falls, some worship them, and some simply admire them on dark nights. We are all, in fact, children of the stars, because without them we would not exist... This symbol can be found everywhere on Earth. That is why, and also because it is simply beautiful, we will make stars of happiness out of paper.

For this we need strips of paper and a little time. The size of the strips is 1 cm x 23 cm or other sizes with a similar width to length ratio (1:23). Of course, the width can be greater, for example, if you use A4 paper, then with a strip length of 297 mm, its width can be made 11-12 mm.

To determine the size of the future star, you need to multiply the width of the strip of paper by 1.67.

Here are some ready-made calculations (width | length | star size):

1,0 | 23,0 | 1,67
1,1 | 25,3 | 1,84
1,2 | 27,6 | 2,00
1,5 | 34,5 | 2,50

Making a star

1-4. Bend a strip of paper around your finger and thread the tip of the paper into the resulting loop. We carefully tighten the resulting knot so that we get a neat pentagon.

5. It is desirable that the tip does not extend beyond the pentagon at all, but if this happens, then simply bend it in the opposite direction (step 5). And it’s even easier - cut off the excess)))

6-8. With the free end of the strip we begin to wrap the pentagon in a circle, in total you should wrap it 10 times in this way.

9-11. If the tip remains, you need to bend it (or cut off the excess) and hide it.

12. Here we have a blank star.

13, 14. Holding the workpiece, press the edge of the star with your fingernail, pressing it inward.

We repeat similarly with the remaining faces. Here you need to act especially carefully so as not to spoil the star.

And now our star of happiness is ready!

It's hard to imagine New Year without a dressed-up, bright evergreen beauty that gathers the whole family around her, helps create a festive atmosphere, and fills the house with a fabulous, exciting aroma. To decorate a Christmas tree, you don’t have to run to the store for toys; you can do them yourself, using improvised materials that can be found in everyone’s home. Today we will tell you how to make a star for a Christmas tree with your own hands in order to decorate the top of the tree.

Very beautiful decoration The Christmas tree will be made from completely ordinary materials that can always be found at hand. Such a star-top will look very original on an evergreen beauty and create a festive Christmas mood. And the process of making it is quite simple and will not take too much time.

Materials required for manufacturing:

cardboard from the box;
wire;
special tool pliers;
comfortable scissors;
scotch;
dry glitter;
bright tinsel;
Polish for hair.

Let's get to work

You need to cut out two identical five-pointed stars from cardboard. Bend them so that they are voluminous. Glue them together with tape, after putting pieces of fabric, crumpled paper, and cotton wool inside to give more volume. In order to subsequently put the finished product on the top of the Christmas tree, a spiral of wire must be placed inside the star. To prepare such a spiral, you need to take the wire and wrap it tightly around a stick. The excess piece of wire must be cut off. It is best to create the product when the Christmas tree has already been installed, and you can more accurately compare the actual dimensions of the spiral and the star itself.

Lubricate the voluminous star generously with glue and carefully sprinkle it with glitter so that the cardboard underneath is not visible. Allow the product to dry thoroughly. Later, use hairspray to cover the top with glitter so that it does not fall apart. The edges of the star can be decorated with elegant tinsel. The top star is ready, all that remains is to put it on the Christmas tree.

Beautiful, easy to make star

This star for New Year 2019 is very easy to make. Therefore, you can also involve small children in the making of these stars.

For this decoration you will need:

dense double-sided colored paper, or cardboard;
scissors.

Make this template in whatever size you want.

Copy the template onto colored paper of 2 different colors and cut out 2 blanks. Then bend each of the 2 blanks 3 times along each of the 3 corners, as if 3 ribs are formed.

You will get 2 halves like this:

Now we connect the 2 halves together:

If you glue a stick or pencil inside one of the halves, you will get a top for the Christmas tree. You can make garlands from such stars for a Christmas tree, or decorate a room with them.

Five-pointed volumetric star made of paper will be a wonderful decoration for the Christmas tree. Large product you can decorate the top of the tree, small ones will look beautiful on Christmas tree branches.

For this decoration you will need:

paper;
Printer;
scissors;
glue.

To make a voluminous five-pointed star, you can use any thick type of paper. This could be cardboard, old magazines, books, or other types of similar material. For large tops you need to use dense materials; for small stars you can limit yourself to plain paper. For a large five-pointed top, you need to take five sheets of cardboard. Select your favorite jewelry size. Using a printer, print out 5 blanks of the rays of the future star. The resulting templates must be carefully cut out. First glue each piece separately. Then all 5 rays must be glued together. This decoration can be made more festive. For example, decorate the rays with sparkles, sequins or beads. You can make each ray of the decoration from different colors of paper. Then you will get a beautiful, multi-colored top.

Voluminous eight-pointed top

Making an eight-pointed star on top out of paper is quite easy. With this decoration you can decorate not only christmas tree. You can decorate a room, window, lampshade and New Year's gift. The size of this decoration for the New Year 2019 depends on the size of the paper.

We will need:

thick paper;
pencil;
glue;
scissors;
decorative thread.

Let's get to work

You need to take two sheets of colored cardboard, or another type of thick paper, and give them a square shape. After this, each sheet must be folded in half. Once - horizontally, another time - vertically. After this, you need to bend it in half twice diagonally. Next, you need to use scissors to make small cuts along the perpendicular folds. Such cuts should be half a line long. There are 4 of them to make in total. One opposite the other. After this, the edges of the cuts need to be bent one towards the other. You should end up with four triangles. The next step is to coat one side of each ray with glue and glue the second one to it. The result will be one half of the future star. In the same way you need to make the second blank. After this, they need to be glued to each other. When Christmas decoration When it's ready, you need to make a hole in one of the beams and thread it through decorative thread. If you don't have colored cardboard, you can safely use regular multi-colored paper. It is very impressive if you decorate the product with shiny details, beads or other New Year's tinsel.

Star 3D

These tops are easy to make. They are made from thick paper and are a very original New Year's decoration.

We will need:

colored cardboard,
ruler,
pencil,
scissors.

Let's get to work

On thick paper you need to draw two five-pointed stars. To do this, you can use cardboard of one color or several. The next step is to turn Special attention. We make cuts. On one of them it is necessary to cut from the top of the corner to the center, on the other workpiece - from the inner corner also to the middle. After this, the blanks need to be inserted one into the other. This decoration can be decorated with sparkles, artificial snow or other New Year's tinsel.

Small paper stars will perfectly decorate a New Year tree, home or holiday gift for the New Year 2019.

We will need:

colored paper;
scissors.

Let's get started:

For little stars like these Any will do type of paper. These can be regular colored sheets, or pages of glossy magazines, packaging, or any shiny paper. main feature when working with it, cut the strips correctly. Their length should be 221 millimeters and width 9. The paper must be cut into pieces of a similar size. After this, you need to take one such strip and fold it into a loop. In this case, one tail should be much shorter than the other. The small tail must be wrapped in such a way as to form a knot. This is a very neat job. It will require a lot of patience and delicacy. After this, the resulting knot must be tightened very slowly (so as not to tear the paper) and pressed. The result will be a smooth pentagon. The tail must be tucked in the middle. After this, the strip with the resulting pentagon needs to be turned over and the tail tucked inside this figure. If the strip turns out to be very long, it can be folded in half and only then hidden in the middle. Next, the long end must be wrapped around each side of the existing pentagon. It needs to be about 15 turns, but not less than 10. Each edge must be turned at least twice. The end of the ribbon is hidden inside. Everything is ready :)

Master class with video instructions:

All that remains is to gently press on the middle of each edge. It will turn out voluminous New Year's craft. It can be decorated with shiny New Year's tinsel.

Origami star

A beautiful origami paper star will perfectly decorate not only a festive Christmas tree, but also a room for the New Year 2019.

step 1 step 2 step 3
step 4 step 5 step 6
step 7 step 8 step 9

For this craft you will need:

sheets plain paper.

The main thing is that the material is not too dense and bends perfectly. You can use both children's colored paper and regular newspaper.

Let's get to work

First you need to make a square with straight sides. After this, such a sheet needs to be folded twice. Once - vertically, the other - horizontally. On paper sheet you will get 4 planned squares. The corner of each of them needs to be bent towards the center. Two corners that are located opposite each other need to be opened. After this, the paper must be bent along a horizontal fold. This turned out to be one of the preparations for the future elite. You need to make 5 similar figures. The blanks need to be inserted into each other. Those corners that you bent will hold the finished structure. When folding New Year's decorations, pay special attention to ensuring that the corner of one block is inside the second, and the corner of the second is inside the first. When you attach the last part, you need to glue a loop to one of the corners.

Each child tries to decorate their room in their own way. Some people draw pictures, and some make paper crafts and hang them all over the room. Most often children want to make stars. They can be used to decorate not only walls, but also to depict the starry sky.

Stars can be made large, small, colored, voluminous, pentagonal and octagonal. Such crafts serve not only as decoration, they bring a lot of pleasure and happiness. And also the manufacturing process is developing perfectly fine motor skills hands and imagination.

Volumetric paper stars

There are many options for making three-dimensional stars. Let's look at some of them.

Octagonal star. To make this craft you will need:

Paper;
Scissors;
Pencil;
Glue or double-sided tape.

Diagram of a volumetric star made of paper:

Option for beginners

For it you will need:

Cardboard;
Simple pencil;
Scissors;
Glue.

A step-by-step diagram of how to make a paper star with your own hands:

Craft in origami style

To make it, you only need colored paper and scissors..

Manufacturing stages:

Cut strips. Their width should be 1 centimeter and length 30 centimeters.
Make a loop out of the flat and insert the tail into it. You will get a knot in the shape of a pentagon.
Now this pentagon needs to be wrapped with the same strip. Wrap each edge twice and hide the tip under a strip of paper.
All that remains is to give the craft volume. To do this, take it in your hands and press on each edge in the middle.
The origami star is ready.

Unusual paper stars

New Year's star from a roll from paper towel. To make this craft you need:

Paper towel roll;
Scissors;
Brush.
Transparent colored film from candies or flowers.

Making master class:

New Year's garland

To make such a garland, you need colored paper, a hole punch, a ruler, thread, and a sharp stick.

Manufacturing stages:

Paper star ball

To make such a craft, you need:

Step-by-step master class:

Cut each leaf in half.
Spread the edges of each part with glue and twist into tight tubes.
Attach three rays using a stapler in the form of a fan.
The resulting fans need to be strung on a thread. You should get a spiky star in the shape of a ball.

These unusual and interesting stars can be made from paper. Choose any option and get creative. Good luck!

Attention, TODAY only!

An excellent New Year's decoration for a Christmas tree or room - a three-dimensional star made of paper. The star looks gorgeous, and it’s not at all difficult to make.

What will you need for work?

Colored cardboard or white, depending on what color the star is needed;
Scissors, glue. Any stationery material, such as PVA or glue stick, adheres well. But when connecting two ready-made parts of a star, for reliability, you can use Moment glue or a glue gun.

How to make a three-dimensional star out of paper?

Cut two identical squares from cardboard. When determining the size, you need to be guided by the square itself; what its size is, so will the star, since the corners of the square correspond to its rays.

Fold one square in half, corner to corner. Straighten and fold in half again, but this time the second corner to the opposite corner.

You should end up with two cross folds on the square.

You will get 4 cross folds in the shape of a snowflake.

Now you need to make the rays of the star. To do this, you need to bend one edge of the corner, aligning it along the fold.

Then another.

Repeat the action with all corners.

The rays need to be glued together; a cross shows which side is best to apply glue on. Spread it well on all triangular sides, from the corner to the straight bottom. You can not do everything at once, but take one beam at a time.

Glue was applied, and then the side without glue was glued on top.

Glue all the rays together.

You will get this one part of a volumetric star. By the way, it can be used for applications.

Make a second piece from the second square.

And then simply glue them together, middle to middle. Try to ensure that each ray of one part is at the maximum in the center of two rays of the second. Sometimes the contact point between them is very small, check it first, connect without glue, determine the joints, and apply glue there. You may need Moment glue or a glue gun.

Want to decorate your home, classroom, desk, New Year's card or need little surprise? Try making a star out of paper. A beautiful star will decorate any celebration! In this article I will show and tell you how to make a star out of paper. Choose which star you need to make. I will offer many ways to make simple and voluminous stars.

What is needed to make a star

If you decide to make a paper star, then first of all you will need paper. It could be:

cardboard,
plain white paper,
foil paper,
colored origami paper,
newsprint,
scrap paper or other

You will also need: glue, scissors, decorations (glitter, beads) and a little patience.

How to make a large voluminous star

A large voluminous star is good for decorating rooms or a Christmas tree. For such a star you will need thin cardboard or thick paper.

Download the templates from the link -, print and cut out the necessary blanks from cardboard. You will need to make 2 sheets with template #1 and one sheet with template #2.
Cut out the templates and bend them along the dotted lines.
Assemble all 5 pieces using glue. You will get a five-pointed paper star.

Such a star made of music paper, foil paper or thin shiny cardboard looks good.

You can decorate the finished star with glitter, sparkles or special paint.

How to make a 3D star out of paper

A simple but effective star can be made from plain paper. The star turns out voluminous and beautiful. You can make several of these stars and hang them on a thread. Such stars look good both on the Christmas tree and just in the room.

Template for the star -

Cut out 2 stars from paper, bend them along the given lines and glue them with an offset, as shown in my video. You will get a wonderful star if you use beautiful colored or glitter paper.

How to cut a star out of paper

Sometimes we need a pentagonal star. It can be pasted on a postcard or poster. To cut out such a star you just need to know the paper folding technique.

Watch my video tutorial on how to fold such a simple star and you will learn right away!

How to make lucky stars from a strip of paper

Did you know that stars can be made from a simple strip of paper? These funny little plump stars are usually called “lucky stars”. They are very easy to assemble. And craft stores even sell ready-cut strips of different colors and patterns for these stars.

Adding stars of happiness is very easy. Take a strip of paper, tie a knot at the end and start folding the strip. Then hide the remaining tail and lightly press the figure.

You can watch my video tutorial on folding these cute little stars.

Little stars of happiness can be strung on threads and you get a whole curtain - a rain of stars. You can make a bracelet or earrings from the stars. And also just pour the finished figures into beautiful bottle, a vase or just a gift bag.

How to make a star out of paper using origami technique

You will get a very beautiful three-dimensional paper star if you make it using the origami technique. This beautiful star looks great both on the tree and on a gift.

Of course, for beginners in origami, it will be a little more difficult to fold it, but if you have patience and a great desire, then I believe that you will definitely succeed in this star.

Watch my master class on making a beautiful paper star:

How to make a star from an old book or newspaper

An interesting star can be made from sheets of an old book or newspaper. Each individual stick is rolled into a thin bag, which then needs to be secured to a cardboard blank in the shape of a star.

Please note that the book will require a lot of pages))

To decorate such an original star, you need to cover the tips of each element with sparkles. To do this, dip the bag in PVA glue and then lower it into a box of glitter. Glue all the bags onto a cardboard blank - in the end, you will get a large newspaper star.

But, in my opinion, this is still a decoration in retro style. But you might like it.

Stars glowing in the dark

You can easily make charming paper stars that glow in the dark with your own hands. To do this, you need to cut holes in the template. These could be small stars, diamonds, or some intricate pattern. Next, you need to place a garland bulb in each star. Every home has an old, working, but not very pretty garland. Why not build from it glowing stars?

Place the light bulb in the star and glue the template. All that remains is to hang this beauty and wait for darkness.

These glowing stars look simply amazing!

How to make a Star of Bethlehem from paper

Often for matinees and holidays you need to build a Bethlehem star. This is an 8-pointed star and is quite easy to make from paper.

You just need to download and print the template and make several paper blanks, each time reducing the size a little. Then you will have to stick the stars on top of each other and decorate them.

You can decorate the star of Bethlehem with sparkles, rhinestones, beads and other materials. You need to attach a lace or ribbon to the top.

How to make an openwork star kusudama

In addition to ordinary paper stars, there are openwork cut-out kusudama stars. This is a star-ball made using the weaving technique. The paper template for such a star is first cut with a stationery knife or small scissors, and then all the parts are glued into a ball. This craft looks simply gorgeous!

You can even come up with your own openwork pattern for kusudama.

I hope you will definitely like the paper stars and make the most beautiful paper star!