Very stylish pullovers made of fine mohair. Different knitting options for women's mohair sweaters

Mohair is a fairly versatile yarn. You can knit something from it for any weather: from warm winter sweaters to light spring shawls. Needlewomen who know how to work with knitting needles can always make for themselves original item. Today you can find women's mohair sweaters suitable for any occasion.

Thin mohair pullover

For those who are just starting to master knitting, it is sometimes difficult to choose suitable thing. I want to make a beautiful pullover for myself, but I still can’t figure out complex patterns and designs. This is exactly what the model of this thin pullover is suitable for. It is knitted in regular stockinette stitch. However, the soft mohair and beautiful steel color make it look classy.

It will require:

150 grams of yarn with the addition of mohair (80% mohair, 20% polyamide, 245 m in 25 g);
knitting needles No. 6 and 9.

Only 2 types of drawing are used in this work:

rib 1*1: knit and purl loops are knitted alternately;
front stitch: front rows - front loops, purl r. – purl sts.

These 2 patterns are considered fundamental in knitting. Therefore, such a mohair sweater may well even become the first thing that a needlewoman will knit. All calculations are based on size 38/40. Of course, you can increase it by simply adding the required number of loops and rows.

Knitting should start from the back. Cast on 60 stitches on needles No. 6 and knit 6 cm with an elastic band. Slip stitches onto needles No. 9 and continue knitting in stockinette stitch. Immediately in the first row, evenly decrease 12 stitches so that the sweater looks harmonious.

For armholes, after 60 cm of knitting (it is advisable to try it on so that everything matches), close off 2 stitches on each side. Then decrease 2 stitches in each 2nd row. This should be done before and after the first and last 2 stitches so that the bevel goes evenly. When the length of the back becomes 76 cm (again, it is advisable to try it on yourself), bind off all the remaining loops.

Actually, knit the front part of the sweater in the same way as the back. First comes the elastic, then the stockinette stitch. The only difference is the neck. For this, close off 16 stitches in the center at a height of 64 cm from the edge. After this, both parts are knitted separately. The one that is not needed yet is collected on a special pin.

In order to complete knitting the front for a sweater, you need to decrease 2 stitches in each second row, 1 time and 2 times by one stitch. After 76 cm, close both shoulders. Again, do not forget to try on the front part each time.

All that remains is to knit the sleeves for the sweater. Cast on 31 stitches on needles No. 6 and knit 6 cm with an elastic band. Switch to needles No. 9 and continue knitting in stockinette stitch. At a distance of 16 cm from the edge, start adding 2 stitches in each 2nd row from the beginning and end after 2 stitches.

To make a sleeve roll, close 2 stitches on both sides at a distance of 54 cm. Then decrease in each 2nd row 3 times one p. before the last 2 and after the first 2 sts. As soon as the sleeve length reaches 64 cm, bind off all the loops. Don’t forget to try it on yourself so as not to make a mistake with the size.

Now you can start assembling your mohair sweater. Connect the back and front along one of the shoulder seams. Cast on 65 stitches for the neckline and knit 4 rows. Close. Sew the 2nd shoulder seam along with the neckline. Sew in the sleeves and join the pullover at the sides. Steam everything well and you can try on your first mohair sweater.

Openwork sweater “Bear tenderness”

However, if mohair sweaters with patterns were only simple, it is unlikely that this yarn would be so popular. One of its advantages is the ability to knit beautiful openwork items. The following mohair pullover proves this perfectly. However, here the entire arsenal of knowledge about knitting and crocheting will come in handy. But the result will be radically different from others.

It will require:

65 grams of blue mohair (25 g/250 m);
knitting needles No. 3.5-4 cm;
hook 2.5 cm.

Below is a diagram of the pattern. The number of loops should be a multiple of 34+16 for symmetry, and 2 more edge loops. To accurately calculate the quantity required loops for the set, it is recommended to knit a sample measuring 10*10 cm. Then just start knitting the sweater.

The back, front and sleeves are knitted according to the pattern. You just need to make sure to form an armhole and a neckline. Where and how to do this is shown in the figure below. You can also understand this by trying each detail on yourself. After completing the knitting, put everything together. Tie the sleeves and neck according to the picture in the diagram. Another original mohair sweater is ready.

In the end, I would like to note that mohair is a truly universal yarn. From it you can knit any thing that you can think of. Mohair yarn is easy and pleasant to work with. And sweaters made from it turn out to be soft, airy and warming the soul.

Video: DIY mohair jumper

Large selection of mohair knitting products

Mohair is the favorite yarn of many fashionistas and a truly unconquered peak for most knitting fans, because working with this yarn is quite complex and requires increased attention. Pullovers, cardigans, blouses, hats, stoles, jackets or snoods - all this will look original if you choose mohair for knitting.

This yarn attracts novice needlewomen with its beauty and characteristic visual and tactile qualities - airiness, softness, weightlessness, and professional knitters love this yarn made from Angora goat wool for the ability to perform interesting work and complex models.

The versatility of mohair lies not only in a rich color palette , because this yarn absorbs colors remarkably well, but also comfortable to wear both in cold and warm seasons: in winter it warms and prevents you from freezing, and in summer it absorbs moisture and protects you from overheating. And the most pleasant quality of the yarn, which is why many people choose for knitting, is hypoallergenic- she doesn’t irritate even the most sensitive skin. It is important to know here that mohair often includes no more than 83% of Angora goat wool, the rest of the composition is supplemented sheep wool, silk, acrylic.

This soft material divided into three subspecies:

Kid Mohair- the most delicate thin mohair, which is preferred when knitting openwork products;
Gatling - denser yarn obtained from kids up to two years old, which is selected for dense patterns for a variety of models of knitted items;
Adult Mohair- dense thick threads that are good for working with simple large knitting.

The final result depends on the choice of yarn, because if you choose for delicate patterns dense mohair, the product will look inorganic, and most likely you will not want to wear it.

Knitted patterns from mohair with knitting needles - diagrams and descriptions

Professionals say that you can knit almost any model of clothing from mohair, you just have to find the right patterns and description of the work progress. Knitting with mohair needles can be made much easier by if you use the golden rule: For thin yarn use thin knitting needles, for thick yarn use large knitting needles. The tension of the mohair threads must be constant, otherwise the result will be uneven, loose and stretched.

Fundamentally important point This work contains a correctly selected diagram and description of mohair knitting. Let's try to consider several options for schemes varying degrees difficulties for different models clothes.

Hat for woman

Perhaps this is not the most original model of a knitted mohair hat, but it is already a proven classic that is suitable for women, children, and even young people, because this model of hat is now popular among men as well. Knitting mohair with knitting needles for women is not difficult, you just have to carefully study the diagram and description of the work.

We knit a hat with jacquard stripes for a head circumference of 54–57 (57–60) cm

Width and length of mohair hat: 22 (24) cm.

For this model you will need 2 types of yarn: 1) 1 skein of gray (main color), 1 skein of white (finishing color 1) 100% wool; 100 g/575 m; 2) 1 skein of green (finishing color 2) 66% mohair, 4% wool, 30% polyamide; 50 g/500 m; and circular knitting needles No. 4 and No. 5.5 40 cm long.

Work process:

We knit an elastic band alternately knit 1, purl 1.

Facial surface: In circular rows, knit only facial loops.

Jacquard pattern: knit according to the pattern in stockinette stitch. The color distribution is indicated in the description.

Knitting density: 20 p. x 19 r. = 10 x 10 cm, knitted with a jacquard pattern on knitting needles No. 5.5.

Knit pattern in 2 threads = finishing thread 1 + finishing thread 2, taken together.

Diagram and description:

On knitting needles No. 4, cast on 72 (80) sts with a thread of the main color and knit 18 r in the round. with an elastic band.

Switch to knitting needles No. 5.5 and perform 3 rows. with the front stitch, while in the 1st r. row evenly add 0 (4) sts = 72 (84) sts.

Decreases:

continue knitting with a thread of the main color, while binding off every 6th stitch (knitting 2 stitches together with the front one) = 60 (70) stitches.

After 5 r., knitted with a thread of the main color, knit 1 r., alternating 1 p. with a thread of the main color and 1 p. with a thread of the finishing color.

Next, knit to the end with a finishing thread: in the 4th row. after decreasing, bind off every 5th st. = 48 (56) sts, knit 3 r. knit, covering every 4th st. = 36 (42) sts, knit 3 r. knit, covering every 3rd st. = 24 (28) sts, knit 3 r. knit, covering every 2nd st. = 12 (14) sts.

Pull the yarn through the remaining loops. Fasten the ends of the threads.

Make a pompom from finishing thread and sew it to the hat.

Knitting a sweater

A knitted mohair sweater can come in a variety of variations, from modest and classic to bold and shocking. No wonder designers and couturiers from all over the world love to use mohair yarn when implementing the most daring sketches! At the same time, mohair sweater models can look playful, flirty, gentle, and strict. That is why it is worth trying to knit at least one model from mohair.

We knit a sweater on size: S (M) L (XL).

Width mohair product according to chest circumference: 05 (113) 121 (129) cm.

Length will be: 65 (69) 73 (77) cm, respectively.

To make a sweater you will need: Yarn 1 (100% cotton; 50 g/220 m) - 4 (5) 5 (6) skeins of menthol color; yarn 2 (70% mohair, 30% silk; 25 g/210 m) - 4 (5) 5 (6) skeins of menthol color; knitting needles No. 5 and 6; circular knitting needles No. 5, 60 cm long.

Patterns and schemes:

Facial surface: Facial rows - facial loops, purl rows- purl loops.
The elastic band must be knitted alternately: knit 1, purl 1.

How to knit a heart pattern:

16 p. x 22 r. = 10 x 10 cm, knitted in stockinette stitch using needles No. 5 in 2 strands (= one strand each of yarn 1 and yarn 2).

Completing of the work:

Back:

On needles No. 5 in 2 threads, cast on 85 (91) 97 (103) sts and knit with a curly elastic band:
1st row (= purl row): knit. edge (in all rows), *p1, k1*, repeat from * to *, finish p1, k1. chrome 2nd row: knit stitches. Repeat these 2 rows for a total of 21 rows. Then switch to needles No. 6 and continue working in stockinette stitch (1st row = knit row).

Important:

Switch to thread from a new skein at the beginning or end of the row. Tie a knot and secure the end of the thread to the edge.

When the length of the part is 42 cm (applies to all sizes), close on both sides for the armholes with 4 stitches.

Then decrease 2 stitches on both sides in every 6th row. (= front rows): chrome, knit 3 stitches together, knit until the last 4 stitches on the knitting needle, remove 2 stitches one at a time, as in knitting, knit 1 stitch and pull the removed loops through the knitted stitch , chrome

After decreasing in total 6 (7) 8 (9) times, knit 4 rows. directly.

Then close off 1 stitch on both sides and transfer the remaining 51 (53) 55 (57) stitches to the auxiliary needle.

Before:

On needles No. 5, cast on 85 (91) 97 (103) sts and knit with a curly elastic band.

1st row (= purl row): edging, *k1, purl 1*, repeat from * to *, finish with knit 1, edging.

2nd row: knit stitches.

Repeat these 2 rows, knit 21 rows in total.

Then switch to needles No. 6 and knit 18 (21) 25 (29) r. stockinette stitch (1st row = knit row).

Then knit in a pattern according to the pattern (1 square = 1 p. x 2 p.).

At the same time, when the length of the piece is 42 cm (applies to all sizes), close the loops for the armholes in the same way as described for the back. Finish the front like the back.

Sleeves:

On knitting needles No. 5, cast on 33 (37) 41 (45) sts and knit 21 r. with a curly elastic band, as described for the back.

Switch to needles No. 6 and knit in stockinette stitch, adding 1 stitch on both sides in the 1st row, then 1 stitch in every 4th row, increase in total 14 (15) 16 (17) times = 63 (69) 75 (81) p.

Then cast off 4 stitches on both sides. After this, decrease 1 stitch on both sides in every 2nd person. row: chrome, knit 2 sts together, knit until the last 3 sts on the knitting needle, remove 1 st as a knit stitch, knit 1 st and pull the removed loop through the knitted one.

In total, perform decreases 20 (23) 26 (29) times, finish with purl. next to it and bind off 1 stitch on both sides in this row.

Transfer the remaining 13 stitches (applies to all sizes) to an auxiliary needle. Knit the second sleeve in the same way.

Neck trim:
Transfer the remaining stitches of all parts to circular needles No. 5 in the following sequence: sleeve, front, sleeve, back and knit in the round with a curly elastic band:

Row 1: *K1, P1*, repeat from * to * until end of row.

2nd row: knit stitches.

Repeat these 2 rows, complete 8 rows in total. and close the loops in the next row.

Assembly:
Sew raglan seams (use cotton threads or cotton yarn of the appropriate color). When switching to a new thread, first tie the ends of the threads in a knot, then secure. Sew side seams and sleeve seams. Lightly moisten the product and leave until dry.

Jacket with openwork pattern

What to please yourself with before the onset of the cold season? You can knit a striped blouse you are interested in with openwork pattern! A soft and delicate jacket will not only undead and decorate a girl or woman, but will also warm you up. Isn't it lovely? Important: This special pattern also requires crochet skills.

A sweater knitted from mohair with an openwork pattern is suitable for sizes: S (M) L (XL) XXL.

To work you will need:

Yarn 1 (100% wool; 50 g/225 m) - 3 (3) 4 (5) 6 skeins of lavender color;
yarn 2 (70% mohair, 30% polyamide; 25 g/225 m) - 2 (3) 3 (3) 4 skeins of light purple; knitting needles No. 3,5 and 4; circular knitting needles No. 2.5 and 3, 40 cm long; circular knitting needles No. 3.5 and 4, lengths 40, 60 and 80 cm; hook No. 2.5.

Front rows- front loops, purl rows - purl loops.

Important:

The product is knitted from top to bottom from the neckline to the armholes on circular needles in the round, then from the armholes the front and back are knitted in the round. The sleeves are knitted from the armholes in rows in forward and reverse directions on straight needles.

We knit an openwork pattern according to the diagram and description:

Decrease 1: slip 1 st as a knit stitch, knit the next stitch and pull the removed loop through the knitted one.
Stripes: Knit on needles No. 4 – 12 r. openwork pattern with yarn 2 in 1 thread, then on knitting needles No. 3.5 - 12 r. openwork pattern with yarn 1 in 1 thread. Repeat these 24 rows constantly.
Knitting density: 22 p. x 30 p. = 10 x 10 cm, knitted with an openwork pattern (according to the diagram) with a stripe effect.

We do the work:

Start from the neck. On circular knitting needles No. 2.5 with yarn 2 in 2 threads, cast on 142 (150) 150 (158) 158 sts and knit 2 rows in a circle. purl. Next, knit with only 1 thread.

Switch to circular needles No. 3. Mark the beginning of the raglan increases: from right to left, count 45 (47) 47 (49) 49 p. (= back), mark the next 2 p., count 23 (25) 25 (27) 27 p. (= right sleeve), mark the next 2 sts, count 44 (46) 46 (48) 48 sts (= front), mark next 2 sts, count 23 (25) 25 (27) 27 sts (= left sleeve), mark first and last stitches row.

Important:

Work the next round on circular needles No. 3, then switch to circular needles No. 4 and perform the 1st strip with yarn 2.

Continue knitting in the circle with an openwork pattern (distribute the pattern for each piece separately). 1st r. openwork pattern begin and end (for the back, front and sleeves) according to the arrows in the diagram.

At the same time, perform raglan increases - 1 increase on both sides of the 2 marked loops = a total of 8 increases per row.

Repeat raglan increases every 2nd r. Knit in stockinette stitch on marked stitches. Include the added loops in the pattern as soon as possible (before that, knit on them in stockinette stitch). Knit strips at the same time, changing knitting needles and yarn (see above). Continue stripes until the end of the product.

In total, perform 26 (28) 30 (32) 34 raglan increases on each side = 98 (104) 108 (114) 118 stitches for the back and front and 77 (83) 87 (93) 97 stitches for the sleeves. The number of loops includes 2 marked loops, which are taken into account when counting the loops for each piece.

Leave the sleeve loops temporarily and continue working on the back and front loops.

Back and front:

Knit on circular needles in the round. On both sides, cast on 3 (4) 6 (6) 8 sts for armholes = on knitting needles 202 (216) 228 (240) 252 sts and continue working in the round.

Knit stripes in an openwork pattern on those loops that can fit into the pattern - there may be loops on both sides that won’t fit into the pattern; knit on them in stockinette stitch. Knit until a total of 8 repeats of stripes are completed from the neckline (= 12 rows of openwork pattern with yarn 2, 12 rows of pattern with yarn 1 = 24 rows in total, knitted 8 times). The last strip is knitted with yarn 1. Close the loops.

Sleeves:

Number of loops = 77 (83) 87 (93) 97 sts, knit with needles No. 4 in rows in forward and reverse directions. At the beginning and end of the row, cast on 2 (2) 3 (3) 4 loops for the armhole = 81 (87) 93 (99) 105 loops.

Continue working in rows in forward and reverse directions. Knit stripes in an openwork pattern on those loops that can fit into the pattern - there may be loops on both sides that won’t fit into the pattern; knit on them in stockinette stitch. All rows begin and end with faces. chrome loop.

After 2 cm from the armhole, start making decreases at the beginning and end of the next person. row: persons. chrome, knit 2 stitches together, knit until the last 3 stitches on a knitting needle, decrease 1, knit. chrome

Repeat decreases every 10th r. (8th r.) alternately in every 6th r. and every 8th r. (every 6th r.) alternately in every 4th r. and every 6th r. - complete 13 (16) 18 (21) 23 times = 55 (55) 57 (57) 59 p.

Knit until a total of 8 repeats of stripes have been completed (= 12 rows of openwork pattern with yarn 2, 12 rows of pattern with yarn 1 = a total of 24 rows, knitted 8 times), as on the back and front, + 1 additional strip with yarn 2. Sleeve length from armhole = 44 cm. Close all loops.

Knit the second sleeve in the same way.

Assembling a mohair sweater:

Sew the sleeve seams. Sew the sleeves into the armholes on the lower sections. Tie 1 p. around the neck. conn. Art. yarn 2 in 1 thread. Wash the product, lay it out and leave it to dry.

Mohair pullover - master class for beginners

An easy-to-make mohair pullover will always come in handy. In addition, this loose cut hides any figure flaws, and how warm it is, despite the openwork!

The pullover can be knitted in the following sizes: 38/42

To do this you will need: Yarn (43% natural wool, 22% silk, 22% mohair, 13% yak wool; 150 m/25 g) - 200 g color. rosewood; circular knitting needles No. 4.

Patterns and schemes

Openwork pattern: The number of loops is a multiple of 18 + 11 + 2 edge loops = knit according to. scheme. It shows facial rows. In purl rows, knit all loops purl or acc. instructions, always knit yarn overs purlwise.

Start with 1 edge loop and loop before the repeat, repeat the repeat all the time, finish with loops after the repeat and 1 edge stitch. Repeat rows 1–16 constantly.

Patent Edge: In the front row, knit 2 loops, in the purl row, remove 2 loops as purls, while stretching the thread before work.

Rubber: An even number of loops = in the front and back rows between the edge rows, alternately knit 1 front, 1 back.

Knitting density: 20 p. x 33.5 r. = 10 x 10 cm.

Important: Due to the large number of loops, we recommend knitting on circular knitting needles in rows in forward and reverse directions. Knit the pullover in one piece without shoulder seams, starting from the back. Arrow on pattern = knitting direction.

Pattern

We do the work:

Cast on 102 stitches for the back and for the placket, knit 7 cm with an elastic band, finish with 1 front row and in this last front row, evenly distributing, add 19 sts = 121 sts.

Then first purl 1 row. This series is not taken into account in subsequent calculations.

Continue working with an openwork pattern.

After 15 cm = 50 rows from the initial row, add 1 x 1 p. for the side bevel on both sides, then in every 2nd row 30 x 1 p. according to. pattern = 183 p.

After 55 cm = 184 rows from the starting row, the shoulder line is reached.

After this, leave the last 91 loops for the left front and on the first 92 loops of the row continue to work for the right front as follows: edge, 90 stitches in an openwork pattern, from the transverse thread add 1 knit crossed and this loop, as well as the last loop of the row, then knit with a patent edge on 2 loops = 93 p.

After 54.5 cm = 183 rows from the shoulder line, i.e. after the front row, leave the loops.

Then include in the work the remaining 91 loops for the left front and knit in a mirror image, while in the 1st row along the right edge (= edge of the neckline) add 2 sts = 93 sts.

After 54.5 cm = 183 rows from the shoulder line, also leave loops.

Then knit 1 purl row with a single fabric on both fronts as follows: knit 67 loops of the left front, place the first 26 loops of the right front behind the last 26 loops of the left front and constantly knit 1 loop of the right front with 1 loop of the left front together, purl the remaining 67 right front loops = 160 sts.

A warm fluffy sweater should be in every woman's wardrobe. Cozy mohair sweaters pair perfectly with skirts, trousers and jeans. There are many models available women's pullover, knitted. A variety of patterns are chosen for this, both embossed and openwork. Since mohair is a rather fluffy yarn, it is better not to mess with complex patterns.

Firstly, you can easily make a mistake during the knitting process - after all, due to the existing fluff, beginners may not be able to see the loops.

Secondly, the pattern may turn out to be so “tricky” that you will waste your time - in the end you will simply not see the openwork implementation.

A little about yarn

Mohair is considered the finest and warmest yarn, most suitable for women's sweaters and blouses. This yarn is made from the wool of Angora goats. Special equipment makes fine and high-quality yarn very convenient to work with. Things made from this material are very warm, soft and beautiful. Even an inexperienced needlewoman can knit a mohair sweater - the models are easy to work with and do not require special skills. To begin with it is better to use simple patterns and more simplified models - without knitting sleeve caps, cinching and other additions.

Simple mohair sweater

To knit a women's sweater, you will need mohair yarn - you can use it with the addition of wool or polyamide. We recommend using size 5 knitting needles for mohair yarn. Knit a sweater in stockinette stitch, since the knitting needles are thick and the yarn is thin, you will get a sparse, almost openwork knitting.

To make a product of size 48 (taken as an example), you need to cast on 80 loops. If you plan to get a larger or smaller sweater, then the loops should be increased or decreased accordingly. Knitting starts from the bottom of the product. The work should be performed according to this description:

Cast on 80 stitches for the front and make an elastic band 6 cm wide with a 1x1 pattern, that is, alternate purl and knit stitches. Then continue working with stockinette stitch: alternate knit and purl rows. The back is knitted to a height of approximately 57 cm - this is the length from the bottom of the product to the neck - the sleeve will be lowered, so there will be no need to knit the armhole line.
Make a notch for the neck. To do this, bind off the central 8 loops and continue knitting the left and right sides separately. To round, make a decrease in knitting from the neck side. To do this, from the front side through the row, decrease two loops at the same time (close them or knit them together). This is done three times, and the remaining loops are closed. The height of the front shelf should be about 64-65 cm.
The back of the product is knitted in the same way as the front. Only the rounding is done in a slightly modified way - first close the central 12 loops, and then three more times one loop on both sides of the neck.
Sleeves. Cast on 32 loops and make an elastic band of 5 cm. In the last row, increase the loops by adding them from the broach between the loops - increase by 24 pieces in total. Next, knit in stock stitch, not forgetting to add stitches on both sides of the sleeve to create a bevel. This is required 13 times in every fourth row. Then you need to add one loop 4 times through each row. The length of the sleeve is approximately 47 cm. Knit the second sleeve in the same way.
When all the parts are ready, they should be sewn together. You need to start by sewing the back and front together. Then sew the sleeves and sew them into the finished sweater.
Tie the neckline, either crocheted or knitted. Using circular needles, cast on the loops around the neckline and knit 4 rows with an elastic band, then bind them off.

The finished mohair product does not require steaming with an iron, otherwise you can damage the fibers and it will not “fluff” well. To level the products, they can be moistened in cold water and laid out on a dry towel. Let the pieces dry and sew them together.

Openwork sweater

Women's fluffy sweaters can also be openwork. This type of work can be done by craftswomen who have extensive experience in knitting without problems and long calculations. An openwork sweater made of thin mohair will be very light and delicate, but will not lose its ability to retain heat. To make a product of size 44, you will need 250 g of yarn and thin knitting needles No. 2.5. For work, only two patterns are used - for the elastic band and the main pattern. Elastic – it will be at the bottom of the sweater, on the sleeves and neckline. The pattern is made by alternating 2 knit stitches and one purl stitch.

The openwork pattern is the main pattern with which the entire product is knitted. It consists of a repeat of 7 loops. Knitted in the following sequence:

1st row: make a double broach - slip 2 loops and pull one of them through both, knit, yarn over, knit, yo, knit, simple broach - slip one loop and pull the next loop through it.
Knit all odd rows with purl stitches.
3rd row: double broach, yarn over, knit 3, yo, simple broach.
5th row: knit, yarn over, simple broach, knit, double broach, yarn over, knit.
Row 7: knit 2, yarn over, knit 2 stitches together, yarn over, knit 2.
From the 9th row, start rapport all over again.

The technology for knitting a sweater is presented as follows:

Back. Cast on 140 stitches and knit 2 cm with an elastic band. Then knit in an openwork pattern up to the armholes. Make it by decreasing loops by 2 loops 2 times and removing one loop once. Then you should knit another 18 cm and bind off all the loops. If you don’t have experience or the pattern seems too complicated, you don’t have to do the characteristic knitting of the armholes.
Before. Knit the fabric in the same way, making armholes. There should be 130 loops left. To knit the neckline, close off the central 28 loops, and then make roundings on both sides of the neckline by decreasing 3 loops at a time across a row and 5 times 2 loops each. Knit the front to the length of the back and finish by casting off the loops.
Sleeves. Cast on 60 loops, make an elastic band and knit in an openwork pattern, adding loops every sixth row. Roll up the sleeves by decreasing stitches across a row 3 times with 2 loops and 15 times with one. Knit to a height of 15 cm and bind off the remaining loops.
Assembly. Pre-wet the parts and place them on a towel or blanket. Dry and sew. First you should sew the shoulders, then sew the sleeves and sew all the side seams. Cast on the loops around the neckline on circular needles and tie with an elastic band. The sweater does not require subsequent steaming with an iron.

Knitting allows a woman to realize her ideas and fantasies. All her works will be in a single copy, which means it will allow her to be fashionable and original in her outfit. Mohair products look great here because they are warm, light and very comfortable.

Another advantage of mohair sweaters is their lightness. If you noticed, even the descriptions given indicate a fairly low weight of the yarn necessary to realize your fantasy - only 200-400 g. Moreover, despite their lightness, mohair pullovers are quite warm - they are not inferior to products made from real wool. Mohair is soft and, unlike wool, does not itch at all, so the products are perfect for people with sensitive skin.

- this is not only one of the most thin threads, but at the same time, the warmest yarn for knitting various clothes. It is produced from the wool of Angora goats using special equipment. After this, a high-quality thread is obtained, from which needlewomen knit beautiful and easy-to-wear items. Who hasn’t dreamed of having mohair sweaters in their wardrobe, which are worn not only with trousers and jeans, but also with skirts, and also over dresses. We invite you to get acquainted with some of the proposed patterns and knit a classic sweater style with your own hands.

To work, you need to use knitting needles with fishing line number 5, as well as mohair yarn, possibly with the addition of wool or polyamide. According to the calculations that will be given for knitting, yours should be size forty-eight. If you want the product bigger size, then you will need to initially increase the loops. And accordingly, if you need to do less, then at the very beginning, cast on a smaller number of buttonholes.

Women's mohair sweaters, like men's, begin to be knitted from the bottom. Cast on about eighty stitches and start knitting the front part. For the elastic, you need to alternate knit and purl buttonholes. The elastic band should be six centimeters wide. After this, work begins on the front stitch. The product is knitted in a straight line until a length of fifty-seven centimeters is reached. Next, you need to make a reduction to form the neckline. The central buttonholes in the amount of eight pieces are closed, continuing to knit the left and right shelves separately. Decrements continue until rounding begins to occur. In each strip, after one, you should close two loops once or three times one link at a time. The remaining loops on the instrument are also closed. The height of the product should be approximately sixty-four centimeters.

The back of a mohair sweater is knitted using a similar pattern. The only difference is that for the cutout you need to close not eight, but twelve central loops, and three links are closed once on each side.

Now you need to make the sleeves. To do this, pick up thirty-two stitches with knitting needles and knit simple elastic band. Its width should be five centimeters. In the last strip you need to make an increase in the amount of 24 pieces. The work continues in stockinette stitch with additions to create a bevel. On both sides, add one link in every fourth strip. Doing this thirteen times. Then, every other row, add 1 stitch four times. The total length of the sleeve should be 45 cm. The second sleeve is made in exactly the same way.

When all the parts of the sweater are knitted, you need to assemble and sew everything together. Place the front of the sweater to the back and sew them together using any method you know how. Then connect the sleeves and sew them into the sweater. The edges of the threads are hidden using a hook in the inside of the product. Now the knitting of the mohair sweater is completely completed.

Experienced craftswomen knit mohair sweaters not with stockinette stitch, but with other various patterns. The well-known braid and braid pattern is perfect for this. This pattern is universal for both women's and men's items.

Openwork mohair sweaters are considered fashionable and are in steady demand from year to year. Their popularity is constantly growing, especially among knitters who come up with various combinations of patterns. For example, a relief strip with an openwork pattern will look very impressive. This style also involves the front and back stitches, as well as the openwork, which is knitted according to the pattern. The back in such products is almost always done the same as the front, only you need to increase the loops to round the neckline. For the collar part, pick up stitches and knit in the round. Then they make a cross elastic band and close the product with facial loops.

Thin Nissa mohair pullover. A beautiful, light and airy pullover made of mohair knitting needles. This model is very feminine and frank, as well as simple and elegant.

Model designer: Marie Wallin

You will need:

Rowan Kidsilk Aura yarn (75% Kid mohair and 25% silk; 75 m / 25 g) (shown in the photo in color 758 steel),
Knitting needles 6 mm.

Knitting density:15px19r=10cm faces. satin stitch

Thin mohair pullover Nissa description:

BACK AND FRONT

Dial 71 p.

Start with faces next to each other, continue with stitches,form side bevels, decreasing 1 stitch per seceach side of the 11th row and2 times next 10th p.m. 65 p.

Knit 13 rows straight, ending with purl side by side. Add 1 st on each side of the trail. row, then next. 12th r: then next. 10th p.m. 71 p.

Continue knitting straight until the length of the piece reaches 37.5 cm.. finish next to the wrong side of the product.

Armholes

Cast off 3 sts at beginning of next. 2 rows. 65 p.

Decrease 1 stitch on each side. 3 rows, then 1 time in each row. second row. 57 p.

Continue knitting straight until the armhole length reaches 21.5 cm.. finish next to the wrong side of the product.

Shoulder bevels

Bind off 4 sts at beginning of next 2 rows. 49 p. Bind off 5 sts at the beginning of the next 2 sts. 39 p.Knit another 16 r. Close the loops.

SLEEVES

Cast on 37 sts. Start with stitches next to each other, continue stitching stitches, form side bevels. Add 1 st on each side in the 5th row, then 6 times in every 6th row, then in each next row. 10th row - until there are 57 points left.

Continue knitting straight until the sleeve length reaches 45 cm, ending next to the wrong side of the product.

Top of the sleeve

Bind off 3 sts at the beginning of the next 2 sts. 51 p.

Decrease 1 st in the next 3 rows, then 4 times in every other row, then in every row until 31 sts remain. Bind off sts.

ASSEMBLY

Steam and iron the details. Use a backstitch or mattress stitch to join the shoulders, neckline, side seams and sleeve seams. Sew in the sleeves.

www.ravelry.com/patterns/library/nissa