Lal cut a peacock from foam. Some tips on how to make a peacock from plastic bottles

Reading time ≈ 6 minutes

If you want to decorate your site in an original and budget-friendly way, you can do the decor yourself. For example, make a peacock. Since ancient times, this bird has been a symbol of nobility, beauty and happiness. Making such decor from plastic containers is a painstaking and time-consuming task, but the result will certainly pleasantly surprise and delight you! We offer step-by-step instructions according to which you can make a peacock from plastic bottles with your own hands.

Crafts from plastic bottles.

Necessary materials

Let’s say right away that making a peacock will require a lot of bottles, up to several hundred, depending on the desired dimensions of the product. You can use containers of different sizes and shades.

For example, for a bird with realistic parameters (about 70 cm tall and a tail length of 100 cm) you will need the following container:

0.5 l - up to 50 units;
1-1.5 l - 100 units of each volume;
2-3 l - 50 units;
5 l eggplants - 5 units.

In case the preparations spoil or do not turn out as intended, it is convenient to have a number of spare bottles on hand.

Plastic container for master class.

Also for the master class you will need the following materials and tools:

polystyrene foam - it is light, easy to work with and holds its shape well, so you can make a base for the body and head from it;
metal rod, wooden beam 10*10 cm for the base;
linoleum - convenient as a basis for a wide and long tail;
paints, foil, sequins - will be needed at the final stage of work to decorate the bird;
fastening materials: hot glue, nails, stapler and tape;
scissors, awl, stationery knife;
copper mesh.

Keep in mind that the work will take you about a week and will require a lot of patience, attention to detail, and diligence.

The photo below shows how harmoniously the finished product can be placed among flower beds of perennials and other garden figurines.

An example of decor in garden design.

Making the base

You need to start creating plastic crafts from the base. For cutting, it is best to use a breadboard knife with a very sharp (preferably new) blade. The sharper the blade, the less debris there will be and the smoother the sheets will be cut. In this way you can easily cut sheets up to 5 cm thick.

For thicker sheets, you can use a jigsaw or hacksaw. With this cutting method there will be more debris, but it will be possible to cut sheets about 10 cm thick.

Peacock base: front and side views.

The foam pieces must be glued together with a heat gun. Using a breadboard knife, you need to work out the details of the workpiece so that the shape is as realistic and realistic as possible. neat look. Then the body needs to be wrapped in copper mesh, securing it with a stapler - such a base will be very convenient for further attaching the feathers.

Detailed foam peacock base.

After making the base, it must be secured to a metal rod driven into a wooden beam or post. The timber must first be sanded and painted or varnished for a neat, aesthetic appearance.

Feather preparation

Harvesting feathers is the most labor-intensive, time-consuming part of the work, requiring great perseverance from you. You will need a lot of feathers; they will take up the bulk of the plastic container. Feathers must be different lengths: short and rounded for the chest, body, and oblong for the tail and wings. If you have green bottles at your disposal, it is better to use them for the tail section, and make the neck and chest from transparent containers painted blue.

Tip: when cutting, sort small and long feathers into different bags - this will greatly simplify your work when assembling the craft.

Feathers for crafts.

So how to make feathers correctly? You need to cut off the neck and bottom of the bottle, cut the resulting cylinder so that you get a rectangle. You can draw feathers on it by hand with a marker or cut it right away, if you have enough experience. Feathers for the body and neck should be small, with a straight bottom and a rounded top.

Feathers for the tail should be made as follows - cut off the neck and bottom of the bottle, cut the cylinder into a rectangle and divide it into 4 equal parts. From them you need to cut out the headers in the shape of a feather, and make a fringe from the edges (see photo).

On the long feathers of the tail, it is imperative to draw the “eyes” characteristic of a peacock using brown, blue and black paint.

Drawing on bird feathers.

For example, after drawing the feathers may look like this:

Finished feathers from bottles for the tail section.

Assembly

Now you can start assembling the product. Using a pencil on the base, immediately delineate the areas where feathers will be used. different sizes.

Important! You need to start gluing feathers from the bottom of the product, since all subsequent upper rows should cover 1/2 of the lower feathers.

Thus, row by row, you need to completely cover the entire body of the bird with feathers. To make a beak from a plastic bottle, you need to cut the blank in the shape of a cone, roll it up and glue it to the muzzle. If you cut out the head from foam plastic quite carefully, you can skip this step.

Gluing the feathers.

Next, the head needs to be painted white with water-based paint or enamel. white, draw the elongated eyes characteristic of the bird. Paint the beak red if the color of the plastic is different. Finally, you need to create a comb using wire and “arrows” from a plastic container.

Cover the entire body of the peacock with blue paint, first wrapping the head with film so as not to stain it.

Coloring the body.

The wings need to be painted brown:

Assembly of the body.

Now you can proceed to assembling the tail section.

Cut a 100*30 cm piece of linoleum; it should be narrower at the top. The narrow end of the workpiece must be attached to the body of the bird. Use nails to secure.
Starting from the end, attach row after row of feathers so that each subsequent layer overlaps half the previous one.
Closer to the body you need to use shorter feathers. Secure them with a glue gun. Ready!

Ready product.

This craft looks very impressive and will certainly become the highlight of your site. The manufacturing process is quite painstaking, but with the help of our step-by-step instructions you can easily make a peacock from plastic bottles with your own hands!

You can watch the peacock making process in detail in the video below:

Decoration summer cottage original decorative items Lately has gained extraordinary popularity. Crafts made from bottles occupy a leading position in budget landscape design. Durable material retains its original shape for a long period of time, is affordable and incredibly functional. Detailed description the process of how to make a peacock from plastic bottles will help to realize interesting idea into reality on your own.

Available materials

The peacock is considered a noble bird that adorned the royal gardens for a long time. To decorate your own plot with a symbol of happiness, first of all you will need a lot of patience and free time. Therefore, it is better to start making a peacock, or at least its individual parts, in late autumn, when the main work on the plot has already been completed.

There are several options for making peacocks from plastic containers. Some craftsmen use foam plastic as a basis, decorating it with feathers cut from bottles. Others make the entire frame from plastic containers. Everyone chooses a method individually, depending on their own experience.

For our peacock you will need to prepare:

the function of the body is performed by a plastic canister with a volume of 10 liters;
PVC pipes are used as legs;
for fastening together individual elements peacock will need thick wire;
metal mesh as a base for the wings and tail of a peacock made from bottles measuring 0.5 x 1.5 m;
foam for the head of the royal bird;
plastic bottles of various sizes and colors for plumage.

Photos of a peacock made from plastic bottles are presented below:

Guide to Making Noble Bird

Submitted step-by-step instruction will help you make an attractive peacock for your garden plot without much difficulty.

When all the elements are assembled together and securely fastened together, begin coloring the peacock. The proposed option is not mandatory. A master's imagination can work wonders.

Advice! Enamel paint intended for exterior use is optimal for painting. A uniform shade and no smudges are guaranteed.

On final stage engaged in the feathering of a peacock's tail. Green bottles are used for it. One large feather and two smaller ones are cut out from one container. Each element is given a semicircular shape, after which the workpiece is bent in half lengthwise. The edges of bottle feathers are cut into fine fringes.

To make the tail magnificent, you will need about 60 long feathers. A peacock made from plastic bottles with your own hands will have maximum similarity to the original if you draw or glue an “eye” on the tip of each feather - a round-shaped decor.

The feathers are screwed to the mesh by analogy with the wings of a peacock; work begins from the bottom, gradually moving towards the body. This completes the painstaking work of making the royal bird.

To make your garden or yard area beautiful and entertaining, you don’t have to spend money on expensive accessories. Using the usual materials at hand, you can create animals that will become unusual decoration and fun for children. Today, crafts made from plastic bottles are very popular, peacock is one of them.

Peacock made from plastic bottles: materials for master class

To create an original composition, you will need a lot of plastic containers of different sizes. You can accumulate it in advance or start working, eventually adding new bottles to the craft. In general you will need:

3 plastic bottles, preferably transparent, with a capacity of 5, 2 and 1.5 liters;
about 10 pcs. green plastic containers with a volume of 1.5 and 2 liters;
approximately 4 plastic garbage bags (blue);
foil or candy labels;
wrapping oilcloth of blue color, or candy wrappers of the same shade.
Materials for fastening the craft are also required:
transparent tape, but blue or green shades are also suitable;
approximately 1 m of thick rope;
paper clips with a stapler;
sharp scissors.

After the necessary materials have been collected, all plastic containers must be thoroughly rinsed and dried.

How to make a peacock from plastic bottles: step-by-step instructions

First, the body of the “bird” is made from two-liter and five-liter bottles. An asymmetrical cut is formed in them: the neck is cut off in the larger bottle, and the bottom in the smaller bottle. Then the two-liter bottle needs to be secured in the hole of the five-liter bottle, and then everything must be secured with tape. This will be a sketch of a peacock with its neck stretched out.
The head of the “bird” needs to be made from the bottom and top of the bottle. The beak will be imitated by a pair of plastic strips, which are secured with tape to the head. The two finished elements must be securely connected with tape.
Several punctures need to be made in the bottom of a five-liter bottle, in different places, necessary to attach the body to the tail.
Next to create crafts feathers should be formed from garbage bags. They need to be cut into strips about 15 cm wide, and fringed at the edges. The strips need to be folded lengthwise so that a couple of layers of feathers remain, and then attached to the body of the “bird” using tape. You need to leave a little space at the bottom of the body, in which there will then be a hole. The head is also wrapped in blue plastic bags, but without the fringe. You need to attach several plastic strips to it, which will serve as a tuft.
A green plastic container is required for the tail. In each you need to remove the bottom and top, cut lengthwise and round it a little. The remaining plastic should be cut into circles, and each one should be wrapped in foil. A fringe is made on the feather plates, and a circle in foil is attached to the top of the formed feather. You should get 27 feathers, which are connected to the body using a semicircle cut from a plastic container. Its radius should be approximately 20 cm, the first 12 feathers are attached to it. 9 feathers are attached to the next semicircle, then 6. At the end you should get a beautiful fan, the layers of which are connected with paper clips.
The decisive moment in making a peacock is the connection of the structure of the tail and body. A rope is pulled into the lower part of the “bird’s” body, where holes have been cut out in advance, to sew the tail and body together. To make the work go faster and easier, the stitching locations need to be outlined in advance.
After this come the final touches: forming the peacock’s crown with foil circles, as well as painting the beak with moisture-resistant paint. If the craft will be placed outside, it must be weighed down so that the wind does not blow it away. To do this, you need to pour sand through the formed holes, after which nothing will be scary for such a peacock.

Making a peacock from plastic bottles is very easy. You will be surprised that a mountain of garbage turned into something beautiful and beautiful so quickly. original decoration. This craft can be used to decorate a playground or place it in the garden. Motley and bright peacock It will not only please the children, but also cheer up the adults.

Using available materials as materials for creating various crafts has managed to become a full-fledged direction of art and eco-design. This is accessible to everyone and, importantly, teaches not to harm the environment, breathing new life into recyclable materials.

On the Internet you can find a huge number of master classes on making decorative jewelry from plastic bottles. We will tell you how easy it is to “place” a beautiful peacock with bright plumage in your home, country house or garden.

Peacock is a great plastic craft

Plastic bottles are a material that can definitely be found in every home. Our collection of these materials is constantly growing, so why not put them to good use. Depending on what size peacock you need, the number of bottles also changes. If bottles with a volume of 5 to 10 liters are available, 1-5 pieces will be enough, while containers holding 0.5 liters may need up to 50 pieces. In this case, it all depends on the figure size you need. Don’t forget that making crafts is a creative process, sometimes not as simple as it might seem at first glance. We advise you to prepare materials with a reserve, since individual parts may not be available right away.

It is convenient to use foam plastic to make the body - it lends itself well to cutting, is easy to handle and does not crumble much. This is the main stage of work, since the remaining elements are fixed to the “torso” part. Cut out the peacock's body, neck and head. The body of the miracle bird can also be made from one large bottle and one small bottle. In the first one you need to cut off the neck, and then asymmetrically separate the bottom of the second one. And use the remaining parts of the bottom and top to form the head.

List of tools that may be needed for finishing:

plastic bottles;
Styrofoam;
glue;
metal tubes;
scissors;
colored paints;
brush;
rope (wire).

The most difficult and painstaking stage of making a peacock with your own hands is preparing the feathers. The plumage is the basis of the entire figure, and the whole thing depends on how neatly and beautifully they are made. appearance birds of happiness. At this stage you will need a considerable number of bottles of different sizes. To make the craft more fabulous, use colored plastic or paint the existing one with colored acrylic paints. For convenience, cut off the top and bottom of the bottle, leaving a rectangle. Prepare large plastic elements for the tail and chest, and small ones to cover the rest of the body. Feathers are attached to the base using glue or liquid nails.

The wings, in turn, consist of several parts: the lower (elongated feathers) and the upper (made up of small plastic elements cut from the bottoms). They are attached to a wire mesh attached to the peacock's body. In more simple version Plastic can be replaced with colored garbage bags. We cut them into strips and secure them with tape. It is worth noting that the plastic model, despite the complexity of manufacturing, is more unpretentious in transportation and will last you much longer. Feathers from light bags that are prone to damage occur when plastic craft It is urgently needed and will only be available for a short period of time.

The tail is the pride of any peacock! A detail that you will have to put extra effort into if you want your bird to look luxurious. You need to put on prepared long feathers from plastic bottles, moving from the top to the base. Attach the tail to the back of the body using glue or liquid nails.

Don’t forget about such miniature structural elements of the future peacock as legs and beak. The beak can be made from a liter (depending on the overall size of the craft) bottle by cutting two triangles from the neck. After this, we attach the beak to the bird’s head. The legs can be made from pieces of metal tubes, inserting them into the middle of two plastic bottles through the neck for stability.

The final stage. To liven up your craft, make eyes for the peacock and make sure that the plumage is dense and lush, without noticeable gaps on the head and neck.

I want to decorate my yard or garden an unusual craft made with your own hands? Then a budget option is perfect for you - crafts made from plastic bottles. Such an artificial plant will decorate a country house or a private home, will delight the household and surprise all the neighbors. The only difficulty that may arise on your way is your time and patience.

If you are patient and serious, then do beautiful craft from plastic bottles will not be difficult for you.

To create a beautiful DIY craft (peacock, swan, palm tree, etc.) you will need bottles of different colors and sizes. Choose transparent, green and brown bottles of 0.5, 1, 1.5 and 2 liters. Green containers are bottles of kvass, Sprite and 7 UP drink. You can buy a drink and gradually collect the containers by removing the labels from them.

Take containers that are easy to work with. The material should not be too dense. Be sure to use plastic containers so that you can cut them with ordinary scissors. Also, do not forget about safety precautions and do not let your child help you with cutting bottles.

For a complete composition you may also need iron rod, polystyrene foam and other useful materials for crafts. They will become the basis for future garden decoration. To ensure that the iron rod stands firmly in the ground, use a shovel or cover the iron with large stones.

How fewer bottles You use, the larger their volume should be. Thus, if you have accumulated two-liter containers in your house, 10 bottles of each color are enough. If you want to make a large decoration, two-liter containers are the ideal material. For small crafts, one and a half liter or liter containers are suitable. How to make a peacock from plastic bottles?

Gallery: handicrafts from plastic bottles (25 photos)

Peacock made from plastic bottles: master class

Materials:

Keeping it simple step-by-step master class, you can make a beautiful craft “Peacock” made from bottles for decorating your garden with your own hands:

Further design of the peacock limited only by your imagination!

Tips for making a peacock from plastic bottles with your own hands

Making a plastic peacock with your own hands - pure pleasure! This activity becomes fun and simple with a master class or instructions. You can involve children in this activity to turn the activity into a family hobby. Perhaps the children will tell you how best to cut out this or that element and help you screw the containers to the mesh. Make sure that children do not get hurt. Under no circumstances let them cut the bottles themselves! How to make a peacock - see the video below.

By turning on your fantasy and imagination, you can turn your yard or garden into paradise on Earth. And for this you will need just bottles and good mood!