DIY paper flowers: diagrams and templates. Volumetric paper flowers: templates and DIY master class Small paper flowers for a postcard

Paper flowers will greatly decorate your interior and add aesthetics and comfort to your living space. We will show everyone who wanted to learn how to make paper flowers with their own hands a few simple master classes. Step by step photo for beginners will demonstrate the entire process in detail, and our tips will help you get the job done quickly and without unnecessary fuss. From our article you will learn how to make a tulip from paper, how make voluminous flowers for interior decoration, how to cut a rose from colored paper and much more.

To cut out all this floral and paper variety, we have selected for you beautiful diagrams and templates so that you can cope with this task easily and quickly.

Paper flowers have a number of advantages that you will not find in living plants. Firstly, they do not fade, do not require special care and do not cause allergies. With the help of multi-colored paper flowers you can profitable to decorate the interior or clothing, voluminous flowers are attached to the wall or on the door, they are placed in large vases and solemnly presented for the holidays. , you can find out in one of our previous articles.

But to make your first paper flowers with your own hands, diagrams and templates can be printed on a printer. And then - glue the petals according to the suggested instructions.
Do you dream of being given a scarlet flower? Make it yourself! Cut out some templates different sizes and glue the petals onto a special sponge located in the middle of the flower.

And for this purple flower you will need:

• white piece of paper;
• watercolor paints;
• scissors or stationery knife;
• aluminum wire;
• Cork tree;
• paper tape;
• green electrical tape or floral tape.

1. Cut a piece of paper into straight stripes, not reaching the edge of the sheet.
2. Fold the cut leaf into a flower shape.
3. Make paper leaves and roll them as in the photo.
4. Connect the flower with the leaves and secure with tape.
5. Attach a small piece of cork to a wire and twist it in half.
6. Insert the wire into the middle of the flower instead of the stem.
7. Wrap the stem with tape and then with electrical tape.
8. The delicate purple flower is ready.

For a promotion, for example, to March 8th or May 9th, you can make several origami tulips according to the pattern shown in the photo.

If you have a special stencil, you can make a whole bouquet of scarlet roses and give them as a gift to a loved one. Detailed instructions for creating flowers just present in the photo. If there is no stencil, draw the flowers yourself on a sheet of A4 paper yourself.

For other decorative experiments we offer a selection of videos for children and adults With detailed instructions about how to make crafts in the form of flowers.

Flower templates for paper cutting

And in this part of our conversation we will introduce you flower templates for paper cutting. Shapes and sizes of flowers for every taste - from the most delicate color of an apple tree to bright blue cornflower and fiery red poppy.

A few more templates will diversify your flower gallery.




Large paper flowers for decorating a room with your own hands: templates and diagrams

Paper flowers - a win-win when decorating any room.

Please note the short but very detailed master class for making voluminous paper flowers. Application from such a “pink heart” decorate gift wrapping or greeting card.

Flowers from crepe paper– the most beautiful trend of this season. Such giant paper roses You can form them into a chic bouquet, or you can decorate the hall of a restaurant, cafe or your own apartment with them.

It’s not difficult to make a flower with your own hands from paper, especially if you have instructions and manufacturing diagram. Beautiful roses can be made from simple paper templates.

Popular flowers such as carnations can be easy to make from a regular napkin. These delicate flowers will certainly not wither soon.

Scrapbooking is another popular form of creativity for both children and adults. From special colored paper you need cut out simple flowers for cute bouquets or decor.

Easy ideas for scrapbooking - try cutting roses, leaves and petals from special sheets of paper. And then glue everything onto the card along with bows and decorative embellishments.

Making flowers can captivate you so much that you won’t notice how you transfer your hobbies to other materials, for example, fabric. Such cute flowers can make an unusual garland or a delicate flower basket.

A pleasant and very sincere gift for a themed celebration can be postcards made of bright, unusual colored paper, which were created manually.

This option is the most in a simple way to make a person happy, to express your warmest feelings. Often a card complements the main gift.

You can learn how to make a postcard with your own hands from paper on the Internet, because there are a huge number of master classes and templates for various postcards that describe the process of creating such crafts. The cards turn out bright and beautiful, unique and inimitable.

Paper Product Base

In numerous photos homemade cards from the paper it is clear that the main thing in the product is not only congratulatory speech and decoration, but also the basis. Either thick scrap paper or a thin sheet of cardboard is suitable for it.

As for color preference, you should choose a neutral light color color palette so that against its background all other elements are bright and stand out.

A cardboard sheet with embossing and textured patterns looks very original as a base.

To do beautiful postcard more solemn and unusual, it is worth rounding the rectangular ends, or using curly scissors to give the edges a carved outline.

Card with colorful balls

To create a cute and romantic card that can be presented for a celebration on any occasion, you should take thin beige cardboard and fold it in half, rounding the corners. To decorate the outside of the product you need to prepare multi-colored paper balls different shapes: oval and round.

If the card is intended to be given to a girl, then the color of the balloons can be chosen predominantly pink, if for a boy it is blue, neutral shades are suitable for congratulating an adult.

You will need about 15 blanks for future balls. They will be placed both on the front side and inside the product.

Since the shape and size of the elements are different, it is better to prepare cardboard templates in advance and cut them out. After the templates are prepared, you can select the appropriate scrap sheets and cut out the balls.

When the ball blanks are cut out, a piece of thick thread is glued to each of them on the back side. Now you can start decorating the front side of the card. To do this, start gluing balls on top, then subsequent lower layers until the desired result is achieved.

To create voluminous non-standard paper postcards, you can glue the elements onto double-sided tape.

We attach a small piece of tape to the back of the ball, and then to the front base. The result will be a magnificent ornament.

When the balls are glued, you should tie all the threads, tie them with a beautiful ribbon and secure them at the bottom of the balls. Then the edges need to be trimmed.

Several elements are also glued inside the product, leaving space for writing congratulatory words.

Homemade New Year cards

To congratulate you on New Year holidays, as a rule, they choose more thematic decorations in the form of Christmas trees, garlands, snowflakes and other paraphernalia. Great gift will be a hand-made postcard with a voluminous pine beauty using origami technique.

Note!

To make origami blanks, it is better to choose thin ones. paper sheets so that it is convenient to crumple them. You should also give preference to materials with an interesting pattern, then the Christmas tree will turn out colorful.

To create a Christmas tree you need to prepare 5 square blanks from the selected paper. The dimensions of the sides of the squares are as follows: 10; 9; 7.5; 6.5; and 5.5 centimeters, respectively. All squares are added according to the same principle.

First, the square is folded diagonally, then it returns to its original shape and folds diagonally on the other side. The result will be a workpiece with two diagonal fold lines.

Now the first origami blank is ready. There should be 5 of them in total. The Christmas tree is assembled from the top smallest element.

Note!

Quilling cards

A greeting card made using the quilling technique will be simple to make, but very attractive and original.

To create an owl that will be placed on the front side of the product, you need to twist several tight spirals from paper of the color you like.

For the owl's body, a spiral is selected, which will consist of three different shades in the form of orange, brown and beige shades. The width of the paper strip to create the body is 5 mm. Each subsequent strip should be glued to the previous one, and the tip should be glued to the spiral itself.

For the eyes and wings of the owl you need to take thinner paper strips. Each bird wing consists of three twisted spirals that are glued together. The paws are also represented by three spirals.

When all the elements are twisted, they can be glued to the base, decorating the composition with leaves and tree branches, which are also cut out of paper.

A card with flowers made using the quilling technique looks very beautiful.

Note!

Photos of DIY paper postcards

On the eve of the celebration of someone dear to your heart, you want to give a gift that would impress and leave pleasant memories. We suggest making voluminous postcards with your own hands, they are also called pop-up postcards. What are these wonderful postcards?! At first glance, these are ordinary postcards, but when you open them, you suddenly see volumetric figure or a whole composition! Such cards will not leave anyone indifferent! Especially if they are original and keep the warmth of your hands!

DIY cards with flowers inside

Even a child can make a heart-shaped card with a three-dimensional flower inside:

YOU WILL NEED IT
We make both simple and complex creation technologies.

A lush flower for the inside or outside of the card can be made from colored or even plain paper painted with watercolors or pastel crayons. You can cut flowers using this template:

Print out the flower template and color it with paints. Fold it according to the marked fold lines and glue the resulting flower onto the base of the card.

Such a lush and bright card with flowers inside, made with your own hands, will undoubtedly delight the recipient.

He explains how to make it in his master class. TheJulianaHappy:

Option with tender pastel colors, the flowers look very nice. Making stamens for flowers is not difficult!

Original master class on English language, so for your convenience we offer a short translation of the process of creating this flower card.

Standard materials and tools: colored paper, cardboard, scissors, glue, plastic to imitate glass in a window.

Take a tight one colored paper, fold it in half. Cut out a square window in one half.

We make a frame from colored paper of a different color. The glass for the window can be made from a protective film for your phone or transparent plastic. Glue the resulting window frame to the base of the postcard. You can do without “glass” at all.

Glue it into the hole

Glue from cardboard flower pot, glue it in the middle of the card on the fold line. Glue the sides of the resulting pot together so that when you close the card, the pot folds up.

Next, from colored paper we cut out green stems and all kinds of bright flowers: crocuses, hyacinths, daffodils and tulips. Perhaps your bouquet will not be spring, but summer, which means that cornflowers, daisies, pansies, etc. will appear.

Glue the flowers into the pot

The height of the flowers should be such that they do not stick out from the card, but are visible through the window!

The window can be decorated with a cozy curtain.

Original master class

Using the same principle, you can make a card with felt or painted flowers. cotton pads. Additionally, insert a laconic but warm congratulation along with the flowers!

In addition to the flowers from the postcard, you can also see air balloons, stars, bows.

How to make a panoramic flower card along with a congratulatory envelope shows in his master class TheWorkshop:

We take thick paper - the basis for our postcard. Create a rectangle in the center of the fold line of the card. The width of the rectangle is 3 cm, length is 7 cm.

We make cuts along the pink lines with a stationery knife. Then we fold the resulting rectangle inside the postcard. We attach the base of the card to another sheet, b O larger in size than the original base.

Then we make a floral design: a flower pot, the flowers themselves, fluttering butterflies and grass. We combine all this and glue it to the front of our postcard.

Original master class.

Using the same technique, you can make an original vase postcard. You can also make flowers in such vases with your own hands from paper or other available materials.

We bring to your attention a master class on making a very delicate three-dimensional card, which will not only congratulate the recipient, but will also fit perfectly into the interior of, for example, a children's room.

First we make a box frame. To do this, take thick blue paper and cut out a template for the box from it. We fold the edges of the template 4 times, 5 mm on each side, thereby forming a frame. Glue the resulting frames together.

On top of them we glue colored or scrap paper in a color that matches your composition.

Next, we will prepare the elements of the future composition. Glue it together balloon from paper circles. We fold the circles in half and glue them together. A waxed cord is glued into the base of the basket and directly into the circles, forming a ball.

We cut out clouds from scrap paper and a sun from yellow paper. Glue the elements of the composition into a frame. We glue the balloon as follows: we glue the base of the balloon with bulk tape, and the balloon itself with glue. We glue the clouds using the same principle: one with glue, the other with bulk tape.

We make green grass from a simple napkin. First we cut it, then glue it. On the right side of the box we glue a tree made using a hole punch for Scrapbooking. Finishing touch– glue serpentine, butterflies and a congratulatory inscription into the empty spaces! We glue a ribbon with embroidery or lace to the bottom of the box. The original three-dimensional postcard is ready!

Original master class.

3D postcards using Kirigami technique

Kirigami is the art of cutting and folding figures and cards from paper. This is the main difference between Kirigami and other paper folding techniques and is emphasized in the name: “kiru” - cut, “kami” - paper. The founder of this trend is the Japanese architect Masahiro Chatani.

For production, sheets of paper or thin cardboard are used, which are cut and folded. Unlike traditional 3D postcards, these paper models are usually cut and folded from a single sheet of paper. Most often, three-dimensional models of architectural buildings, geometric patterns and various everyday objects, etc. are developed.

It’s better to start with a simple three-dimensional DIY birthday card. For example, using thick paper of two contrasting colors, you can make a birthday cake card:

To make it, use this template:

Using various templates, you can make more complex cake cards:

He explains how to make a kirigami cake in his master class. OksanaHnativ:

Using this technique, you can cut out various congratulatory inscriptions. The cake can be decorated and colored to your liking.

To create it, take this template:

White embossed paper will also make an impressive postcard:

By combining two mirror “cake” parts cut from different sheets, you can make a whole three-dimensional cake in a postcard!

Use the following template:

Creation options voluminous postcards a whole lot! Cut and fold your paper masterpieces!

Volumetric postcards using scrapbooking technique

Scrapbooking is the art of decorating photo albums, but its techniques are also very popular when creating cards.

Using Kirigami elements, using the Scrapbooking technique, you can also make a three-dimensional postcard with your own hands. We cut out and fold “steps” from scrap paper for the “pop-up” candles on the second half of the card. Glue the candles and glue the resulting blank onto the base of the card.

You can make a simple but original greeting card from scrap or colored paper. We cut out the candle flame and decorate it with sparkles, then glue it to 2-sided tape. We glue the second part of the candle with glue. The congratulation itself can be tied or glued to an elegant satin ribbon. Simple and original!

A postcard made from paper of a different texture will look completely different)

By placing each element of the card on top of each other, again using double-sided tape, you can create such a voluminous, bright cake!

Let's take a look at Tatyana Sadomskaya's master class on how to easily make a voluminous, delicate postcard using the Scrapbooking technique using ready-made pictures.

To create such a postcard, Tatyana used:

• scrap set ScrapBerry’s “Favorite Pet”
• scissors
• thick cardboard

It is better to use scrap paper with a large number of miniatures that can be cut from a single sheet, as well as colored stamp prints and chipboards.

Before creating a postcard, you need to decide on its subject in order to choose the color of the base of the postcard and its “ characters" In this case, the basis is paper with a calm beige print, and the components of the plot are cut out of it: kittens, a puppy, flowers, a crown on a pillow.

Don’t forget to decide before starting this work what will be in the foreground and what will be behind it!

In our case, we put the larger kitten in the foreground, this will enhance the feeling that it is closer than kittens with a dog.

We make the necessary cuts. The result is a design with “steps”. We glue leaves of arbitrary size onto the resulting “steps”. These leaves imitate a wooden fence.

Next, we gradually glue our elements, starting from near to far. We start from the foreground and glue the kitten. We glue it onto beer cardboard, because it gives additional volume and casts a shadow. Using the same principle, you can glue several other elements, for example, balls and flowers. When the inside is ready, glue it to the base of the card.

We also decorate the outside of the card with an elegant floral print.

For greater elegance, decorate the elements of the card with sparkles (use glitter).

Original master class.

For inspiration, check out this masterpiece 3D cake card:

Volumetric postcards-dioramas

We present to your attention a master class on making a 3D postcard - a small three-dimensional scene. On such a stage, everyone can place various fancy figures and decorations)

To make a postcard, we take 4 sheets of thick cardboard, in this case we take cardboard in four shades orange color. You can choose colors to suit your taste.

On sheets of cardboard, draw the outline of the frames with a pencil and cut them out. Make the frame outline 1 cm wide.

From the remaining fragments of paper we cut out two strips, each measuring 10 by 4 cm. We line each one into 4 parts of 1 cm each. We cut off all the corners of the resulting strips. Fold the strips along the lines to form a paper zigzag. These zigzag pieces will support the diorama fragments. Glue the zigzags to the frame on both sides.

Glue the second frame clearly along the line on the other side of the zigzag.

The top of the zigzag should cover one side of the frame. The same must be done with the opposite side. Thus, the first scene of the diorama is ready!

Using the same principle, we make the remaining frames of the diorama.

It's better to decorate each of the frames (especially the last one) in advance than to try to squeeze decor into the finished card.

The back wall does not have to be solid; you can make a transparent diorama without a back wall.

Decorate not only the “wall” of the diorama, but also each frame. Use more volumetric jewelry, such as beads, bows, feathers, ribbons, etc. This will make the card seem more voluminous and this will enhance the 3D effect!

Original master class.

You can come up with absolutely any plot! Create your own little theater!

For example, the waiting Assol!

Or a hot air balloon in fluffy clouds.

Bright meadow with lupine and butterflies!

Birdhouse with birds and flowers:

Accordion postcard (diagrams and templates)

Another type of voluminous postcard is the accordion postcard.

To create such a postcard you will need: thick scrap paper for the base frame, a die-cut scrap knife or a stationery knife, transparent plastic for the internal parts, stamens, semi-pearls and other materials for decoration.

We take the template and make blanks for the postcard. We cut out 8 blanks for the base frame from thick scrap paper and 4 from transparent plastic.

Thick paper blank...

...and transparent plastic

We glue the plastic blanks to a paper base. To make the card fold, we make a double crease of about 2 mm on the outer folds. We connect the resulting 4 parts - glue them with glue or use 2-sided tape. Glue the remaining 4 frames on the opposite side.

Now you can begin the most creative part of creating a card - decorating it! Glue fluttering butterflies and twisted greenery to the plastic. The postcard is ready!

Original master class

See below for various templates for making the bases of such postcards:

Using your imagination, you can create all sorts of variants of such folding postcards. For example, with a predominance of children's themes. The number of components may vary.

Birds, flowers, butterflies always look very light and airy on postcards!

Postcards for all occasions

We have already seen that handmade postcards are more original than those you can simply buy.

YOU'LL LIKE IT!
Let's give, and sometimes for no reason at all! 🙂

Greetings, dear readers and visitors! I have already written several times that I really love decorating gifts in the most unexpected ways. And today I suggest you make paper flowers with your own hands. As many as twenty-odd methods, by the way.

Now, unfortunately, I rarely get around to mass gift wrapping. Moreover, every year there are more and more acquaintances and friends who need to be congratulated along with their relatives. This is very joyful! I love giving presents. But if I choose them very carefully, then I pack them in Lately in organza bags, since I decide on detailed packaging only for single holidays (like birthdays).

However, my passion for various kinds It’s hard to beat packaging beauty, so today I’ll train with you to make beautiful flowers using step-by-step patterns.

DIY paper flowers: simple and clever

There will be a lot of master classes, get ready. Good news for all rose lovers: there will be as many as 4 of them.

Aster

Guys, honestly, I'm not very good at naming colors. So if you see a discrepancy that is obvious to you, write in the comments.

So, first in line is the aster. For it, cut out five circles: two large, two medium and one very small. Fold each circle in half three times, then decorate the edge as in the 4th photo. After unfolding the structure, squeeze each petal to give it volume. Stack all the circles and decorate the middle.

Almost calendula

This flower looks much more like a packaging bow. Prepare a square of paper of the required length for it and cut the edges according to step 2. You will need several such blanks. Place them one on top of the other and squeeze them in the center, tightening them with wire or thread.

Now the most important thing is to straighten the petals so that you get a beautiful resemblance to a flower. Accordingly, the more layers, the more petals and the more magnificent the flower in the end.

Tip: make several of these flowers of different sizes and glue them on the packaging next to each other, then you will get a beautiful bouquet.

Calla

To create calla lilies, you can use either regular double-sided paper or foam rubber (I wrote about what it is in the section about the minion).

For calla lilies, take a stamen (you can crumple it out of paper or make it from polymer clay) and a petal made in the shape of a heart. Place the stamen in the petal, fold the edges of the petal over the stamen, gluing them together. All that remains is to unscrew the edges to get maximum resemblance to a calla lily.

Such flowers are well suited for decorating postcards, packaging, and as an independent gift in the form of a bouquet.

Bell

The master class for the bell is very simple and straightforward. Cut the blank according to the first photo. Glue the edges together and carefully straighten the ends. To make everything look natural, make a center of several elongated stamens, which will need to be glued inside the flower.

By the way, these bells would be great to decorate packaging for March 8th or just a spring birthday.

Lilies of the valley

Well, or something similar. For one flower, take a long rectangle and bend its edge, as in the photo. Cut the wide part so that you get many small strips. Using scissors, twist the strips (to do this, you just need to run the sharp side of the scissors along these strips, lightly pressing the blade against them).

To prevent the flower from falling apart, take a rod and wrap a green stripe around it. Then start carefully twisting the “flower” part, previously coated with glue, on top. Apply the layers tightly so that the greenery does not show through.

But making green leaves is not at all difficult - for them, just fold a rectangle of green paper like an accordion and trim the edges into a triangle. When you unroll, you will get a lot of green leaves ready to be glued to the base.

Poppy

Now we use corrugated paper. Cut out about ten teardrop-shaped petals from it. Stretch the wide part so that the blanks resemble mushrooms.

Take a thin wire and wrap some paper around it - this will be the core. Wind the petals onto this core so that each one slightly overlaps the previous one. When everything is ready, the structure can be pulled together at the bottom so that it does not fall apart.

The master class shows how this flower can be attached to a festive cap, but, believe me, gift box poppy will look great.

Red flower

What is its species? No associations came to mind. But that’s not the point - to create it you will need about ten petals (corrugated paper is used, by the way). Their shape is almost teardrop-shaped. but with a cut end.

Cut out a base circle from thick cardboard. Glue all the petals in layers to this circle, slightly crumpling (doubting? God, how right :_D) the bases, thus forming folds - then the flower will be more voluminous and “fluffy”. Decorate the center with some button or bead.

Such a flower, by the way, will look great made of soft felt - this way it will gain durability. And if you attach the base for the brooch at the back, you get two in one - a decoration for the gift and the gift itself.

Extravaganza of color

There are only two flowers, but the bright combinations create a very unusual effect. Take the crepe paper again, cut out a circle and fold it into a “doll” shape. Cut a “skirt” for it, which you wrap around the doll. Attach the petals on top, gluing them in a circle. Glue two wide leaves at the base.

The second flower is very simple - cut the fringe and twist it into several layers. The flowers are very simple, they can make a very interesting gift arrangement.

Unseen flower

To prepare the base for this flower, I advise you to look here - here the base for the second Christmas tree is created in exactly the same way. But then the differences begin - each of the corners needs to be wrapped using a thick wire or knitting needle so that it turns out to be a spiral.

You can leave this design alone, but I suggest you connect several (say, three) pieces using the existing spirals - the wow effect is guaranteed. Then you can also experiment - connecting elements with spirals into unprecedented designs.

Advice: going to a party in Japanese style? Then make such a flower very big size and take it with you - it will serve as an excellent decoration for a chandelier.

Peony

“Pio-, pio-, peonies are given by a new acquaintance...” - words from the song of the underground group “My Michelle” (I’ve been listening to it often lately, inspired by it). We will make from corrugated paper. You will need five sizes of petals, approximately five copies of each ( appearance as in the photo).

Stretch the petals so that you get something like a wave (for both large and small ones). Then form a stamen from the same corrugated paper by folding the paper and further compacting it. You can do this on a wire skewer, or you can do it without it.

Glue the petals onto the finished stamen, each one overlapping the previous one. Do not pull the petal too tightly. In the end, all that remains is to cut the green leaves and stick them around the peony.

4 in 1: dandelion, clove, aster, chamomile

All these wonderful creations of nature are made according to one principle - cutting the edge of a strip from which a flower will be made. The final shape of the flower depends on the cutting shape. Please note that some require a core and others do not.

Please note: despite the very simple design, the flowers turn out very realistic. If you have very little time to make, then this is an ideal option.

Experiment and discover your unprecedented plants - be sure to tell us what happens.

Paper roses

Magic roses are one of my favorite flowers

Rose with twisted edge

The main difficulty here is to carefully twist the edge of the corrugated paper, straightening out the folds. Then make sure that the folds are even. Now twist the strip so that the layers fit tightly together. At the end, secure with thread, trim off the excess.

Simple rose

Need to make a plant in five minutes? Then this rose is definitely for you! Just cut out a circle and draw a spiral in it. Cut out a spiral as in the photo and twist the rose, starting from the longest link of the spiral (the central part will serve as the base).

Big rose

Even gigantic, if you follow these exact dimensions. The heart petals are stretched and placed on top of each other in a circle, secured with glue. Green petals are attached at the end. Of course, the flower doesn’t have to be as big as in the photo – go with your preferences.

Twisted paper rose

Once upon a time I already described this method of creating a rose (here is the second one). The principle is absolutely the same, but the sizes of the triangles resulting from twisting must be the same along the entire length of the ribbon, otherwise the flower will not be very neat.

Once I even made a Rosemary doll, which took part in a city exhibition. Her whole body was covered with roses, made exactly according to this method (the roses were made from ribbons, however).

Clover

I'll just show you how to make the base for the four leaf clover. To do this, take a square of paper and fold it in half lengthwise and in half again. Fold the ends towards the center. Cut out a heart from the resulting design. The result will be exactly what we wanted - a happy flower.

Nameless

No matter how I tried, I couldn’t give a clear name. In the end, there was just a product left a beautiful flower, reminiscent of kanzashi motifs ( Japanese art production of jewelry from satin ribbons).

The beginning here is the same as in clover. But after bending the edges, you will need to bend the ends so that the length of the bent part is equal to the length of the visible side in the middle. Then these parts are straightened out and their edges are folded so that the sides are even. They are folded again and glued together to form three stamens. There should be three such petals.

This flower is most suitable for decorating a gift in Japanese style.

And again the aster

This time you need to glue the petals along the edge until you reach the desired volume. Decorate the center as you wish or simply fill it with as many petals as possible.

With this, I declare the big flower review closed. I hope you have found exactly the option that will help you decorate your gift in the best possible way. See you soon, subscribe and share with your friends!

Sincerely, Anastasia Skoracheva