DIY soft slippers for home. DIY slippers with a pattern - quick and easy

If you like unusual, original things made with your own hands, then soft slippers will be an excellent option for replenishing your home wardrobe. You can sew home slippers from any available materials, it can be old sheepskin coat, tops of unnecessary boots, pieces of fur, wool fabric, drape, leatherette and so on.

You can sew closed, very warm slippers with your own hands. At the bottom of the page there is a file with life-size patterns that you can copy and print. There are three sizes available: 38, 39, 41. If necessary, the patterns can be reduced by several sizes and sew compact children's slippers.

If you want to make your own slipper pattern, you can take a sheet of paper and trace your foot, or you can trace the outline of regular old slippers, tracing their sole. However, you only need to outline your leg while wearing a sock, so it will be more spacious. To create your own patterns for house slippers, you can use existing patterns shown in the picture, adjusting them to fit your foot.

What material can these be made from? cozy slippers? You can choose any available materials. In most cases, the lower parts of the sole are made of artificial leather, leather or split leather. The upper part of the sole is made of suede, split leather, cloth, and there is a gasket between the top and bottom layers. You can use batting and cardboard for this. However, if you wish, you can use any materials by cutting out scraps from old things. The main thing is to show your imagination and put in a little work. You can sew such slippers on a sewing machine or by hand, sewing each seam with a thick thread.

A universal option. The slippers are sewn from cotton fabric; non-woven/dublerin and synthetic padding are used for strengthening and volume. Let's immediately talk about the material for the sole. If it is important that it does not slip, you can use leather or eco-leather, a special material for the soles (usually natural or synthetic fabric with rubber pimples), take microporous rubber (foamiran) or purchased insoles made of material with suitable properties. In other cases, any dense material will do so that the sole holds its shape. By the way, purchased insoles can also serve as a reinforcer for the soles of slippers (the soles need to be strengthened, otherwise it will be uncomfortable to walk).

You will need:

Fabric for the front and back sides of slippers;

Synthetic padding for the volume of the top of the slippers;

Quite thick interlining or other material to strengthen the sole;

Sole material or purchased insoles;

Paper, pencil and scissors for patterns;

Fabric scissors;

Sewing machine and thread.

Step 1

First you need to make a pattern for the sole and top of the slippers. How to do it, . If you are sewing slippers with open toes, as in our example, mark the neckline as well.

Step 2

We cut out the details. For each slipper you need: 1 piece of material for the sole, 1 piece of sole made of padding, 1 piece of the sole made of fabric, 2 pieces of the top of the slippers made of fabric (1 piece of fabric for the lining and 1 piece of fabric for the outer side), 1 piece of the top of the slippers made of padding polyester.

Step 3

Fold the upper parts of the fabric slippers right sides inward and sew along the long sides. Cut triangles in the middle at the top and bottom (see photo), not reaching 2 mm from the seams.

Step 4

Turn out the parts of the top of the slippers, iron them and place the padding polyester inside.

Step 5

Attach the top of the slipper to the fabric sole piece with clips (see photo).

Attach the bottom part of the sole on top with the wrong side up (see photo). Repeat for the second slipper.

Step 6

Sew the pieces around the perimeter, leaving an opening for turning. Cut out the corners on the toe and heel (see photo). Repeat for the second slipper.

Step 7

Turn the slippers inside out and insert the seal inside. Repeat for the second one.

Step 8

Topstitch the bottom of the slippers while sewing up the holes. Ready.

Photo and source: website, mellysews.com

2. Cloth slippers with closed toe

These slippers are similar to the previous ones. They are distinguished by a closed toe and the presence of ribbon decor. Detailed master class.

3. DIY felt slippers

Cozy, warm felt slippers are hand-sewn from just one piece!

You will need:

Printer and paper to print the pattern;

Scissors;

Quite thick strong threads and needle for hand sewing.

Step 1

Print and cut out the template (pattern and Size chart ).

Step 2

Cut out 2 mirror pieces from felt, transfer and also make T-shaped cuts.

Step 3

Fold the slipper and sew over the edge by hand. First, we sew the vertical seam on the heel, without sewing 1.2-2 cm from the bottom (depending on the size of the slippers). Slightly cut the felt by 1.5-2 cm in 2 places on the heel to create a flap. Round its corners. Fold the flap up and sew it on. Sew a long seam. Fold the flap over and (if desired) sew it.

Photo and source: marthastewart.com

4. DIY felted wool slippers

If you know how to felt or want to master this craft, you can make wool slippers with your own hands.

5. Do-it-yourself house boots/felt boots

Boots designed on the principle of Ugg boots are quite easy to sew. How to make these with your own hands - . Here you will find several ideas for designing such boots and selecting materials.

A - read the master class on making similar boots from fleece.

Photo: tillyandthebuttons.com, website/Elena_Moonlight

6. Terry slippers made from old flip flops (flip flops)

Cute slippers made of terry cloth are sewn on the basis of old flip-flops. As fabric for slippers, you can use, for example, terry towel. For recommendations on choosing material for the sole, see Master Class 1.

You will need:

Terry fabric;

Unnecessary flip-flops;

Sole material;

Sintepon;

Pencil or fabric marker;

Tape measure;

Scissors;

Sewing machine and thread.

Step 1

Release the flip-flops from the straps. Trace the soles onto the material for the bottom of the slippers (faux leather is used here).

Step 2

Add 1.5 cm to seam allowances on all sides and cut out the pieces.

Step 3

Using the cut out parts of the sole as templates, cut out the same parts from terry cloth and padding polyester.

Step 4

Measure the sole around the perimeter + measure its thickness.

Cut out 2 side pieces each from terry cloth and padding polyester: add 5 cm to the resulting length of the strip, and 2-3 cm to the width.

Step 5

Outline the pattern for the top part of the slippers. Read more about how to do this.

Learn how to make house shoes. It's very simple and easy. Once you try, you get drawn into this exciting and useful activity. Basically we need different shoes for different people. life situations. One shoe that we wear to work, and it usually follows a certain dress code. Shoes for sports, worn on vacation and, of course, at home, are another matter. And these shoes can be chosen according to your imagination.

rag slippers

The most common hand-sewn home slippers are made from fabric.
The material for them can be found in any home and even a child can cut them out!
Fabric house shoes are the lightest in weight.

glamorous leather flip flops

House slippers are considered a special delicacy,
sewn from pieces of leather.
They are the most durable compared to other indoor shoe options.
Looks cool with anyone home clothes and give it a special shine

felt galoshes

Separately, it should be noted beneficial features felt slippers. They are soft and warm, wearable and easy to sew due to their loose texture. They are also believed to be medicinal.

homemade fur slippers

This is a whole professional product. Every family has an old fur coat or hat from which they can construct homemade shoes. You can take worn-out slippers or moccasins that were comfortable in the past, torn, and rip them open. The resulting parts will serve as a template for the pattern.

uggs are the best friends for our feet

Do your joints hurt? Sew yourself some homemade UGG boots. They are sewn simply and very quickly from four parts. You can use an old sheepskin coat.
Cut out four parts: sole, heel, front cuff, toe. Sew all the parts together with a thick, strong thread, with the seam facing up. Tuck the top

white fur boots

House shoes, boots, also made with your own hands at home. It is very relevant for people who are constantly cold or have joint problems.

felt booties

Very easy to sew. Outline the child's leg with an allowance of 0.5 cm. Cut out the top and accessories (butterfly, leaves) from different colors of felt. Sew the top to the sole using a sewing machine. Sew a rectangle of Velcro on the inside of the fasteners.

baby homemade chuni

The upper is made of fur fabric inside on a knitted base. Suitable for the youngest family members. Three parts are cut out: a whole part of the side parts of the upper, the toe part of the upper with a tongue, and the sole. Sole made of thick fabric or leather. The rest of the details are made of fur fabric. All parts are sewn together using an over-the-edge seam.

denim house shoes

Looks very stylish. Of course, she is loved primarily by fashionistas and fashionistas. Suitable for all ages. Both young and old will feel stylish and comfortable in them. A pattern is made on paper. It is used to cut out details on the fabric. Dense material is used for the sole and lining. The insole is made of pleasant fabric. All parts are connected according to the diagram and you're done.

fur children's paw slippers

For these slippers in the shape of an animal's paw, the sole is cut out in two copies for each slipper (one is the sole, the other is the insole). To trace your foot with a pencil or pen, it happens right away right on the back of the fur fabric. A strip of 6-10 cm for the cuff is cut out separately. The top of the slippers is cut in one piece. The seam of the upper is made at the heel. The cuffs fold in half. All parts are sewn together.

Patterns with sizes of home slippers master class

It’s quite easy to sew ordinary house slippers using ready-made patterns. They are redrawn to life-size size on paper. Cut out the patterns and trace them on the fabric. Cut out the required number of parts. We start assembling using a standard sewing pattern.

• The upper parts are sewn together with the insole, the upper is blank
• Sew or glue the sole elements, the bottom blank
• The bottom and top blanks are connected with glue and stitched for strength.
• Decoration or fasteners, lacing are attached

sew home slippers using patterns

Use these patterns to quickly create simple slippers. You will need any material for the top and thick material for the bottom. Strong threads and thick needle.

bunny boots, master class

Fun and comfortable bunny boots will warm you up and lift your spirits. It's not difficult to sew and anyone can do it.

• Fabric is selected. The material used for manufacturing is soft and dense, plush, velor or fleece. Leather or substitute for the sole. To give shape, padding polyester (but not necessary).
• Tools are selected. A sheet of paper for a pattern, a pencil, bait needles, scissors and a sewing machine.

• A pattern is made of two/three, if with padding polyester, of the main parts plus ears and a tail with allowances. Halves are drawn on the pattern.
• These slippers have two/three layers of material. Upper velor, middle padding and inner lining
• The sole is made new from leather or cut from an old one according to a pattern
• All parts are cut out from the main fabric.

Pin together the details.

Stitching of all the details of the layers occurs for each separately.

The ears are sewn together in advance.

Ears are inserted. The finishing seam is made.

This is how the boots turn out from the wrong side.

Turn it right side out and make soft folds on the top of the boots.

The boot is connected to the insole.

This is what one inner layer looks like.

The outer layer is inserted and cleaved with the inner one from the inside out.

It is stitched along the edge, but leaves a small hole unsewn. Through it it is turned right side out.

This hole is then stitched.

The tails are made separately. Two circles are cut out, folded right sides inward and stitched together, leaving a hole. They are turned inside out and stuffed with padding polyester and the remaining hole is sewn.

Centered back seam tails are located.

Then these tails are attached to the bootleg.

This is what happens in the end.

Bunny boot slippers are loved by all family members. Children are the most delighted. They willingly take part in the production of such shoes.

How to cut fur slippers with your own hands, step by step with photos

Experienced needlewomen advise starting to sew slippers with simple slipper models. They can be open or closed from any available material. By making such slippers, you can learn the basics of patterning and sewing house shoes.

The technique is very simple. To begin with, a pattern is made. Using the pattern, the contours of the parts for sewing are applied to the material. For the sole, use dense and thick material. The parts are sewn together and the decorations are attached to the finished slippers. For ease of wearing, a low heel is glued to the sole. This can be done conveniently with a glue gun.

their unique sizes are taken, patterns are made

You will need to take the following measurements from your leg. Foot circumference along the outer edge, length of the top of the slippers along the inner edge, along the outer edge, heel.

Starts with the circumference of the foot. To do this, place your foot on Blank sheet paper. Old unused wallpaper is used for this.

You can tear out the middle of a notebook into a square. Outline your mark with a pencil or pen. That's it, the soles for the slippers are ready! The heel part of the “heel” is 1/3 of the length of the foot.

Now other measures are being taken. All measurements are taken on the foot in accordance with the already made sole pattern. To do this, place your foot on the pattern of your foot. For the top of slippers. The length of the top of the slippers is measured.

To do this you will need a “centimeter”. The “centimeter” is located from the edge of the big toe on the foot in a straight line to the level of 2/3 of the length of the foot.

The next foot width measurement is needed for the top pattern. This is the width along the inside edge along the rise line.

This measurement is measured to determine the distance from one side edge I molded the feet to the other. The measuring tape is placed across the instep of the foot.

The pattern piece is slightly shaped, but according to your measurements.

Everyone is ready with personal measurements for future shoes. And according to them, patterns are made according to the sketches of the drawings.

patterns of all parts are made from materials

First, the pattern figures are redrawn “by eye” from photos onto paper. Then they are adjusted taking into account the required dimensions. Cut out paper pattern with small allowances. Applying to the leg and finally corrected with scissors.

As an example, work is being done for a male model. For women's, simply take a different material, size and add decorations (optional).

For this you will need:
Top part:

• Faux fur. An old fur coat or vest can come in handy here. For the top layer of the top of the slippers (on the left in the picture).
• Batting or a piece of cloth for cleaning the floor (not used), for insulation (center in the photo).
• Thin, pleasant fabric for lining (on the right in the picture).

Bottom, sole.

• Something durable for the soles. It can be a piece of felt, thick and rough leather, or rubber. The sole is used from old shoes A little bigger size so that you can cut it out the desired shape detail (on the left in the picture).
• Batting is also used here for insulation; a pad is cut out of it, slightly smaller in size than the sole (centered in the photo).
• For insoles, dense but soft fabric is used. You can use ready-made insoles, which are sold at any hardware store. Buy a slightly larger size and cut it out according to the pattern (on the right in the picture). The size of an insulated pad.

An additional detail is an elastic band 3 cm wide or a synthetic strip of the same size.

To make women's or children's, you need to take the appropriate size, select the appropriate material and decorate with decorative elements.

Step-by-step instructions on how to sew fur slippers with your own hands

The details of the fur slippers are sewn together using a sewing machine or by hand sewing. It will be faster on a typewriter, but exclusive by hand. The choice is yours.

To assemble the parts you will need:

Needles for chopping parts to pin all the parts of the top together.

All three parts are attached together from the wrong side.

The stitched parts are trimmed 2-3 mm along the stitching. The protruding fur and the remaining threads along the edges of all layers are trimmed. It turns out to be a single piece of the top of the slippers.

The elastic tape is placed face down on the front side of the part along the inner edge of the top and stitched.

The sewn ribbon is turned on the wrong side and once again attached with a “multiple zigzag”. Special knit stitch on a sewing machine.

On the wrong side, the ribbon is cut very close to the stitching, at a distance of 2 mm.

The wrong side of the upper part is combined with the right side of the insole from the bottom. The middles of the parts must match.

The side marks are also aligned and secured with needles.

For convenience and even stitching of the parts, they are first swept out.

The insoles are sewn to the upper part. They work from the inside out.

Next, a ribbon is placed face down on the front of the slipper and the edge of the strip is folded.

The tape is attached to the front side of the slipper along the entire circumference using machine stitching

This is what we get in the end.

The tape is turned back to the inside of the slipper and secured with a “multiple zigzag” stitch. The entire upper part of the slipper is made.

The “heel-heel” is glued to the sole with a glue gun.

If the part is not glued very well, then it is heated with an iron, the glue will melt and firmly connect the parts.

In the same way, the sole and insulation are glued from the wrong side. To ensure a strong connection, iron it.

As I wrote above, the insulating pad should be slightly smaller than the sole.

The toe part of the sole is coated with glue and attached to the toe part of the top of the slipper.

In the same way, the back parts of the sole and the upper part of the slipper are glued together.

The final step will be gluing the entire sole to the upper part of the slipper along the entire perimeter. It is recommended to iron the gluing areas with a hot iron for greater reliability. If the slippers are made of fur, then it will snag in these places. But it's not scary. Keep the fur side over the steam for a few minutes and everything straightens out.

So the house slippers are sewn. As you can see it is very simple and fast.

Fur makes warm, soft and beautiful slippers. They are easy to make and can be done by beginners. It is enough to understand the main points in sewing slippers and you can move on to more complex materials, such as leather.

DIY children's slippers, photo 3 options

Slippers are cut in the shape of animals or cartoon characters. The shape can be in the form of boots or sandals.

corduroy sandals

For these sandals you will need thick corduroy fabric with any pattern for the upper part of the sandals, a piece of thin suede for finishing the edges with piping and for the fastener straps, 4 buttons instead of clasps.

The upper part consists of 2 whole different parts, the binding for the edging and the strap for the fastener. There are button holes along the edges of the clasp. Buttons are sewn on the upper part on the sides.

It is better to make the lower part from three identical parts in shape. Two of which, the sole and the insole, are the same size, and the middle one is 0.5 cm smaller around the entire circumference.

A piece of corduroy is cut out for the top (on the left in the picture). The second (in the center of the picture) is made of soft, pleasant fabric for the body, this is for the inner part (lining). Both parts are connected to each other with a strip of suede. Place the pieces facing inward. Turn inside out and steam with an iron.

The middle part of the “loop” is tucked inside the sandal and hemmed. Along the bottom of the resulting top, from the outside, another suede trim is sewn face to face along the entire circumference. Fold the resulting border onto the wrong side of the top of the sandals and hem it.

For the fastener strap, a rectangular piece is cut out, sewn face inward and turned inside out. The ends of the parts are turned inward and hemmed. Slots are made along the edges of the fastener for buttons and the edges of the holes are sewn so that the fabric does not fray.

The upper part of the sandal is connected to the lower part of the sole using over-the-edge stitches made with thick nylon thread.

children's slippers in the shape of Czech shoes

Made from felt or thin felt. Main details: one-piece upper, outsole and insoles. The jumper at the fastener is crocheted from yarn.

The mouse's face is made up of appliqué cut from fabrics of different textures and colors. Each piece is sewn with “felt stitches”.

The ears are made from two circles, bigger size and smaller ones of a different color. The eyes are black buttons. The nose is cut out of black fabric and secured with glue. Mustaches made of thick yarn in two colors.

glamorous booties

A sports model for young fashionistas made of felt in the form of sneakers. They are sewn quickly and by hand. You will need felt or felt, two colors. Five parts of the cut: back of the upper, toe of the upper, front part of the upper "tongue", outsole, insole, padding 0.5 cm less than the insole and outsole. Lace and loop strip for decoration.

You need measurements from the child's feet. According to the obtained dimensions, patterns for all parts are made. The contours of the cut details are transferred to the fabric.

How to sew slippers and boots with your own hands, master class

House slippers are women's favorite footwear. They are beautiful and comfortable. They are always warm and cozy. By making such boots, every woman can express herself, and this creates a good mood.

To sew slippers and boots for the house with your own hands you will need:

• Fragments of “wool” or “wool” fabric artificial fur» for main details.
• Cotton fabric (any) for lining.
• Sintepon or batting for filling.
• Felt or other very dense and thick fabric for the sole.

The patterns correspond to foot size 38. To change the size, outline your foot on the sheet, compare the details of the lower part with this sketch and thus adjust it to your size.

all the necessary details are cut out

• Start with the sole. Two parts of the sole are cut out (on the left in the picture), one from felt, the other from thick cotton instead of glass.
• For the main parts, wool or fur fabric is used. The parts are cut out in 2 copies asymmetrically (in the center and on the right in the figure).
• In the same way, parts are cut out from padding polyester for filling and parts from cotton for lining. There should be three sets of different fabrics.

process of assembling boot parts

The house slippers and boots are ready and it takes 1.5-2 hours, no more.

DIY jeans slippers, photo 3 options

Denim slippers are made from old trousers, skirts and bags. First, make a pattern based on your foot for the sole. Any thick fabric or material is suitable for this. Trace around the foot and you're done. Whatever is at hand is used as material. It could be an old camping mat, a thin rubber boat, a car tire tube, etc. Well, they classically use leather, felt, or felt for the sole.

women's denim slides

We used several scraps from old light blue jeans, a piece of felt, and pink satin ribbon for lacing and decoration.

The pattern pieces are cut out from the felt foot in 2 copies. One will be the pad, the other the sole. The same pattern with an allowance of 1 cm is used to cut out denim insoles on the bias.

A bias tape is also cut equal to the circumference of the foot. Two pieces are cut satin ribbon for bows. That's it, the pattern is done. Begin sewing slippers from the top. Fold the two parts with the wrong side together and sew them together with a seam “over the edge” along the rise line.

In the center and at a distance of 1 cm of the resulting top element, slits are made the width of a tape and a distance of 5-7 cm. These holes are processed with a “overlock stitch”. A ribbon is inserted into these holes and a bow is tied.

When wearing such slippers, the denim material quickly stretches out and you can use a ribbon to adjust the tightness of the fit to the foot.

Sew the top to the front side of the insole. The top is ready. The edge is processed with bias tape along the entire circumference. The workpiece is glued to the gasket with the wrong side and the bias tape is turned to the side of the gasket and glued.

The top of the slippers is ready. To complete the process, the upper is glued to the cut out sole and that’s it.

Czech style denim slippers

Made from denim, felt, cotton. For fastening, a large button from an old coat. Measurements are taken from the leg. A pattern is drawn according to size.

Five parts are cut out for one slipper: one-piece upper 2 pieces made of Jeans in a mirror image, fastener strap 2 pieces made of Jeans, insole 1 piece made of cotton, lining 1 piece made of felt, sole made of felt 1 piece.

Sew starting from the top. First, fold two strips of the strap together wrong side out and stitch along the edge with an indentation of 1 cm. Make a slot for the button on one edge and overcast it.

The two parts of the top are folded inside out and a strap is placed in the center. Stitched by machine or by hand.

The front side of the insole is sewn to the back of the upper. Glue it inside out onto the gasket, fold the seam allowances over to the side of the gasket and glue it.

At the end of the work, a felt sole is attached to the resulting top. Glued or stitched. Sew buttons on the sides of the slippers for fastenings.

stylish denim slippers

For this model, needlewomen use thick and thin jeans, foam rubber, felt and thick rough leather. The details are cut out according to the contour of the leg: Leather sole
Insole made of thick denim with 1 cm allowance.

• Bias tape length of sole circumference
• Felt pad
• Heel made of foam rubber and thin denim
• Top made of thin denim in the form of triangles four pieces

The upper triangles are sewn together, two folded inside out. They turn out on their face. Part of the foam heel under the thin jeans is sewn to the insole.

The insole with triangles is folded and processed with bias tape. The padding is glued to the underside of the insole and the seam allowances with the tape are turned to its side.
The sole part is sewn or glued to the entire structure. The second slipper is made in the same way.
Triangles are tied on the leg across the width of the foot.

Video: how to sew slippers with your own hands

DIY slippers in 14.5 minutes

Having direct instructions and a pattern, house shoes are sewn in a matter of minutes. It is very practical and suitable for many life moments. Do you need slippers for any purpose, please go ahead and make them!

Video: pattern of children's and adult slippers

whipped up slippers from old jeans

Knowing how to make house shoes is cool! It can come in handy in the most unexpected situations. For example, make a nice gift to a loved one. And it’s pleasant, and convenient, and beautiful.

DIY “Cookies” slippers

Creative flights of thought sometimes produce pleasant products. It’s enough to take a closer look at the old things at home and you’ll definitely find something for making house shoes. Let's say these could be comfortable slippers.

How to sew leather slippers with your own hands, step by step with photos

The most spectacular house slippers are leather ones. They last longer and remain in excellent condition.

They are sewn as simply as other types of house shoes. The only thing here is that you will need slightly different tools and materials. But, all these tools and materials can be easily found in every home.

What is needed for production:

• Faux and real leather. Priority goes to thick flaps. Login will go old women's bags, used shoes, furniture, old jackets, hats and raincoats
• Not a thick piece of felt
• Small piece of foam rubber
• Disposable slippers
• Non-woven fabric with adhesive backing
• Shoe glue or Moment or even super glue will do
• Special needle. Thick, curved edge. If you don’t have one, a crochet hook will do.
• Old house slippers for pattern
• For holes in the skin, a punch. If he's not there, it doesn't matter. A thick nail and pliers will do. hot nail on gas stove, clamped in pliers, you can easily burn the required number of holes.

The work begins with the soles of disposable slippers. Glue all the slots with glue and wait for them to dry.

But while the glue dries, without wasting time, unripe the old slippers in order to make a pattern out of them.

New soles are cut from the soles of disposable slippers using a pattern made from old slippers.

Four pieces of leather sole are required for the outsole with allowances of 1 cm along the contour. For the top of the slippers, 4 parts of the top are cut out, also according to a pattern from old slippers with 1 cm allowances, on the sides at the junction with the sole.

The 2 parts of the top are cut out of non-woven fabric, 1 cm smaller along the entire contour. Non-woven parts are glued through gauze with a hot iron to the front side of the top parts.

To continue making leather slippers, two upper parts are glued together. Coat the edges at a distance of 1 cm with glue and connect. This is done by weight, on the hands to give shape.

After the glue has dried, the parts are trimmed around the circumference with scissors.

The next step is to use a punch (or a nail heated on a fire) to make holes from the edge, retreating 0.5 cm and keeping a distance of 1 cm between the holes. This is done along the line coinciding with the rise of the leg and fingers.

A 7 mm strip of leather is also cut out, threaded through a needle and stitched over the edge going through each hole.

The ends of the leather tape are glued to the wrong side of the part with glue.

Now cut out insoles from felt or felt, 2 pieces. For this, an outsole pattern is used. Additionally, two half-insoles are cut out.

Two “heel” parts are cut out of foam rubber. All these parts are glued together like a “sandwich”.

First, the outsole is glued to it, the insole generously lubricated with glue is glued, then the “heel” is glued under the heel and the half-insole is glued last. This produces the basic blank for the bottom of leather slippers.

Leather soles are glued to this resulting workpiece on both sides. Apply liberally with glue along the contour of the leather parts.

The entire resulting structure dries well. Then the upper part is glued to the lower part along the side lines.

The steps are repeated with punching holes with a punch or burning with a nail. The distance is 5 mm from the edge of the slippers along the entire circumference and 1 cm from each other.

An additional cut leather tape with a thickness of 7 mm is used to stitch the entire edge of the slippers. The next one is glued to the ending leather tape and stitched in this place for strength.

Women's slipper styles are decorated with flower appliqué.

These are the simple and easy steps needed to sew leather slippers with your own hands. Such indoor shoes serve their owners for a long time. Suitable for use in the bathroom and kitchen.

DIY felt slippers, photo 3 options

For greater comfort, coziness and warmth while at home, use felt slippers as house shoes. Sewing them yourself is not difficult or time-consuming.

The felt used to make such shoes is made from dried camel, sheep or dog hair. There are many benefits from such slippers, since they are natural.

Well, what is its main benefit, besides convenience, durability and simple manufacturing techniques?

The secret is simple. Felt creates a thermal effect. In this way, spontaneous healing of the leg joints from rheumatism occurs. These shoes help with aching bones. Prevents excessive sweating of the feet.

Wearing felt slippers promotes foot massage. Blood flow increases. This leads to an acceleration of metabolism in the body. It is recommended that old people, children and sick people at home wear only such shoes.

Slippers are easy and quick to sew

The pattern is made from thick felt. The leather sole is cut separately and is 1 cm smaller around the perimeter.

The sole pattern is sewn on a machine or glued with glue using a “straight seam” of leather to the felt pattern at the location of the sole.

It is folded so that there is one seam on the side of the foot. Slots are made with a knife or scissors and a ribbon or lace is threaded into these holes. The end of the lacing is secured with a small bow.

A simple version of felt slippers

It is very easy to do from the point of view of sewing homemade felt flip flops. Made from four parts: two halves for the top and two for the sole.

The soles are made from a sketch created from a pencil outline of your foot. The top is cut out on paper randomly according to the photo. It rests on your leg and is adjusted to your size.

The seam of the top is done using a “overlock stitch”. Next, all the parts are assembled and stitched hand stitches“loop stitch” with a strong thread.

felt sandals

They look very beautiful and fashionable. Not to mention that it is also very convenient and useful! They are sewn from four main parts: front upper, back, insole and sole.

A pattern is made of all parts of the sandals. The insole and sole are glued together with glue. The remaining parts are sewn to the bottom using a cross stitch.

To consolidate the result, the sandals are sewn again using a “loop” seam. An additional element is a felt or felt applique decoration attached to the top of the front of the top.

stylish sandals

The main parts, lining and soles are made of thin felt or felt. After drawing the pattern, cut out the upper parts from the main fabric. This is a one-piece sandal upper, insole and sole. Additional ones are a jumper and a strap for fastening. They are rectangular pieces.

The lining is sewn on a sewing machine to the main part, folding them right sides together. The allowance is cut very close to the seam, leaving 1-2 mm. Turn it inside out and once again sew a “straight seam” along the edge, at a distance of 1-2 mm.

Rectangular patches for straps and jumpers are each folded face inward and stitched, leaving one edge unsewn. Turn the open edge inside out and hem it. Then stitch along the edges at a distance of 1-2 mm on both sides. One edge of the jumper is sewn with a “cross stitch” in the center to the edge of the nose area of ​​the front part. A loop is made from the free end and attached.

The strap for the fastener is made in the same way, but instead of a loop it makes a slot for a button and is processed with an overcast seam. A button is sewn on the sides of the sandals instead of a fastener.
The insole is attached to the upper part with a lining along the contour. Fold the allowances under the bottom of the insole and glue them. This creates a blank for the top of the sandal.

The last step is to glue the felt sole to the sandal blank.

slippers for guests

These slippers can be made for a whole group of guests in one evening. They are done very quickly and easily. Felt material. Sewn by machine or by hand using an overlock stitch.

The pattern consists of two parts: the main one and the insole. The main part is folded and stitched. The insole is placed on the sole from below and sewn with the same seam.

Video: how to make unusual felt slippers

As life experience shows, handwork is not only a profitable activity that gives a second life to outdated and worn-out things, but it is also quite an exciting activity. There are no special difficulties in this work. Tools and materials can be found in any home.

Once you learn the basics, you can make a lot of house shoes. Enough for both household members and guests. You can also provide for all your friends and generally start your own small business. Shoe products self made. Create, wear and give.

We always associate slippers with coziness and comfort. After all, these are comfortable and sometimes warm indoor shoes, in which it is easy and pleasant to walk around the house. Available in stores today wide choose shoes for the home, both warm and regular, for the hot season. But we will tell you how to sew slippers with your own hands!

Shoes can tell a lot about a person. About how neat you are, whether you follow fashion. Your shoes, sandals, and boots can tell you whether you suffer from diseases of the joints of your legs. But if the shoes we wear to go outside or go to work must meet certain standards, then you can choose any indoor shoes depending on your desires. We offer you several ideas on how to sew slippers with your own hands.

You can make many pairs of slippers for each family member and guests. The slippers can be different, or they can be made in the same style. Homemade slippers can also serve as a gift for a family member or close friend.

How to sew home slippers with your own hands. Instructions

In order to sew home slippers, you will need a durable soft material. The material can be old items made of thick knitwear, drape, leather, jeans or fur. Before you start sewing, decide on the model and color, sketch out a sketch and make a pattern. It is very easy to make a pattern based on the shape and size of the foot by placing the foot on a piece of paper and tracing it. For example, if you decide to make homemade slippers from felt, then making them may only take you half an hour.

To start, make a pattern as above, simply trace your foot, placing your foot on a piece of paper. Then, to the resulting drawn foot, draw two rectangles on the right and left, which will serve as a jumper holding the slipper on the foot. Once the pattern is ready, cut it out and place it on a piece of felt. It is enough to make a pattern for one foot, for example, the right one, its reverse part will serve as a pattern for the left foot.

Trace the pattern placed on a piece of felt with a pen and cut it out. Then connect the side parts of the jumper with each other into a ring, and try on the future slipper on your foot. Fix the jumper by adjusting it to the leg and sew. So you have a slipper. You can decorate it as your heart desires. Any decoration is suitable here: buttons, rhinestones, beads, fur.

Fabric slippers can also be made at home. In order not to fantasize with the pattern, you can tear up old slippers that have served their purpose and make a pattern in their likeness. If there are no old slippers in the house, then make a pattern yourself, also tracing your foot placed on a sheet of paper.

What to make the soles of house slippers from?

Stores sell felt insoles with pimples. For the sole, you need to buy these insoles (price 36 rubles and 70 kopecks) and trim them a little along the heel and toe.

Then, using “Moment - 1” glue, place the sole on the sewn or knitted slippers and carefully sew around the “gypsy” needle with thick thread with tight stitches. You will get a beautiful and neat sole.

Advantages of a “bumpy” sole

• Felt breathes well and is washable;
• Durable “pimples” give the product an anti-slip effect;
• The inexpensive material is durable and abrasion-resistant, and the sole looks very decent.

And most importantly, you can make an excellent sole for slippers from it in almost 10 minutes!

If you don't want to use felt insoles as soles, look for another dense material. It can be several layers of dense fabric, leatherette, thick denim. After all, the main load falls on the sole, and if it is too thin, it will quickly fray and wear out. And walking in slippers with thin soles will not be very comfortable.

Good afternoon friends!

It turns out that you can quickly and easily create slippers with your own hands from scrap materials, and you don’t even need to look for a pattern of the right size. This is what Evgenia’s next competition entry and master class will cover.

Hello, friends. My name is Evgenia. For as long as I can remember, I have always been interested in something, creating or performing something. I have favorite activities and hobbies, such as fishing. But I also like to try new arts and crafts or experiment with ones I already know. Different types My blog “” is also dedicated to creativity.

I’ve been thinking about making new slippers for a long time, but somehow I never got around to it. Therefore, the competition became an incentive for me.

It’s easy to make such slippers with your own hands, I will try to tell you in detail and show you in the photo.

Simple DIY slipper pattern

Patterns of home slippers with different sizes we won't need it. We will build patterns ourselves, from which we will cut out parts to fit your leg.

I have the patterns ready, I have been using them for several years. Therefore, I will describe this process briefly.

It’s better to make them on cardboard by tracing the foot - you will get a template for the sole. You will also need a cover for the top of the slippers. Trace the pattern of the sole from the toes to approximately the middle. Measure the rise of your leg and distribute this distance from the middle of the lid equally in both directions. Draw the corners of the lid to the extended mark.

Materials for making home slippers

You can make your own slippers from a wide variety of materials: thick fabric, old jeans, felt, felt, fur, leather, even.

These materials will go to the top of the slippers and insoles.

For slippers you will also need:

• linoleum or thick leather for the soles
• foam rubber 10 mm thick.
• corrugated cardboard from a box
• scissors
• pen and marker
• hook and thread.

Cut out the details of the slippers

On a piece of linoleum I draw a sole according to the pattern. Here you need to position the pattern correctly so that the sole does not end up on one foot.

I also draw the sole on the foam rubber; here the location does not matter. It is better to draw on foam rubber with a marker.

I draw the same sole on cardboard. It is better to place the pattern on the cardboard along or obliquely to the corrugations, but not across. This way the cardboard will not break while working and wearing slippers.

Now you need to make an insole that will cover the foam. Any dense materials are suitable for it, such as drape, soft felt, suit fabrics, denim or leather. I have thick knitwear. From the wrong side of the material I trace the pattern, but so that there is a distance of two centimeters between the patterns.

I start opening the lid. Here you need to select materials so that the lid holds its shape well. I will use the same jersey as for the insoles and use it to make a pattern for the inner part that will be in contact with the foot.

I will make the upper part of the lid from a dermantine base.

I do not place the pattern for the top close to the edge of the material, but leave about 1 centimeter along the edges and trace it.

Having finished drawing, I move on to cutting. I cut out blanks on linoleum, cardboard, foam rubber and the inside of the lid according to the drawn contour.

And I cut out the insole for the sole and the upper part of the lid with an allowance, that is, stepping back from the outline by about a centimeter.

How to make slippers with your own hands - master class

Gluing blanks

To prevent the blanks from moving apart when piercing, I glue them together. For this purpose I use any available glue, for example “Titanium” or “Moment”.

I glue the foam rubber to the wrong side of the insole, and the bottom blank of the lid to the wrong side of the top.

There is no need to apply much glue, just lightly along the edges and in the middle.

After the lid parts are glued together, I cut off the corners. I do this for convenience when tying.

Piercing holes

With an awl you need to pierce holes on all the parts, stepping back from the edge about 1 centimeter, maybe a little less. The distance between the holes is approximately 0.7-0.8mm.

Sole binding

I will knit the parts with nylon thread, the kind used for knitting fishing nets. But you can take any other synthetic thread.

First I tie the edge of the linoleum sole. I make a loop on the thread, insert the hook from the front side of the workpiece and pull out the loop.

Having tied the entire sole, I cut the thread and fasten it.

In the same way I tie the foam rubber with the insole, turning the edge of the insole inward. This will give neat look the finished product, since the foam rubber will not stick out through the threads.

It is more convenient to start tying from the center of the heel or toe; below I will explain why.

Having finished tying the foam rubber, I do not cut the thread, but leave a loop.

I apply the insole to the sole so that they match. I insert the hook through the loop of the insole and under the loop on the sole and connect both parts with connecting loops.

Having connected the side parts of the parts in this way on one side, on the other there remains a pocket between the parts, into which I insert a corrugated cardboard blank.

It is more convenient to insert it into this side pocket, and the cardboard does not break. And it is needed to give the sole rigidity, and so that the heel does not sag when walking.

Having inserted the cardboard, I continue to connect the parts to the end, cut the thread and fasten it.

The sole is completely ready, I start tying the edge of the lid.

Tying the cap (top) of slippers

I tie the lid, like the previous parts, holding the front side towards me and tucking the edge inward. I start knitting from the right corner, this will allow me to connect the lid to the sole without breaking the thread.

Connection between base and lid

So, the lid is completely tied, I apply it to the sole so that the corners are at the same level. I connect the lid to the sole using connecting loops.

In the same way I tie and connect the parts of the second slipper.

These are your own DIY slippers - simple and quick!

Slipper decor

I wanted to decorate the slippers additionally; after all, they will be entered into a competition.

Choosing the right decoration for a colorful surface is not easy. After going through many options, I settled on bows left over from an old bag.

Carefully trimmed the protruding edges.

I chose the place where I would attach them and made holes with an awl. I inserted the legs of the bows into them, folded them on the wrong side and pressed them tightly.

I bring to your attention the resulting soft home slippers - slippers, which I made with my own hands.

Zhenya, thank you for your participation in the competition and the very beautiful slippers, we just needed non-knitted ones, and also special thanks for the great work on creating the master class! And these slippers are perfect for guests when someone comes home, there is always a problem of what to give them to wear, and they will be great for the New Year and any other holiday.

Blog administrator "" Olga Smirnova