Matte manicure at home: options and design ideas. How to make matte nail polish at home: methods Matte manicure using steam

Matte manicure is not a new trend in the beauty industry. But the procedure has gained popularity precisely today. Matte manicure will suit any style. In order to get a similar coating on your nails, you don’t have to visit a salon. The procedure can be performed at home if you learn some nuances.

Depending on the method of performing the procedure, the following tools and materials may be needed:

Ultraviolet lamp;

matte top for gel polish;

regular varnish;

base coat;

transparent acrylic powder;

soft fan brush for applying powder;

special matte dust;

Matt lacquer;

corn starch;

foil;

pan with boiling water.

Of course, to perform a matte manicure you will also need classic tools:

• nail scissors;
• nailfile;
• cotton buds;
• cotton pads;
• nail polish remover;
• orange stick for removing cuticles;
• hand cream.

Performing a matte manicure at home

Matte manicure is performed in many ways. Let's look at the main ones.

Based on gel polish

There are four options for performing a matte manicure based on gel polish.

Using a matte top

Do classic manicure: file the nail plates, remove old polish and push back the cuticles. Moisten your hands with cream and wait until it is completely absorbed.

Before the main procedure, it is necessary to file your nails

Apply base coat to your nails.

The base coat must be applied before you start using gel polish.

Now apply colored gel polish and dry it with a UV lamp.

Gel polish must be applied to the nails after the base coat.

Cover the nail surface with a matte topcoat and dry it in a UV lamp for two minutes.

After applying gel polish, you need to cover your nails with a matte top coat.

Video: how to perform a matte manicure based on gel polish using a top coat

Using a grinder

Cover the nail plate with base.

Now apply colored gel polish to your nails in two layers.

Cover the nail plates with a regular nail polish fixer.

Now take a grinder (a special file) and carefully run it over the surface of the nail. In this case, you should only remove the top layer, do not overdo it.

To achieve a matte finish, lightly brush the nail file over the surface of the nail.

Using transparent acrylic powder

Prepare your nails: get a classic manicure.

Apply a base coat to your nail plates.

Now you need to cover your nails with colored gel polish in two layers. Do this as carefully as possible.

Cover your nails with nail polish sealer. Don’t wait for it to dry; immediately apply transparent paint to the plates. acrylic powder. This can be done conveniently using a fan brush.

Keep your powder-coated nails under a UV lamp for two minutes and then remove the excess with a brush.

It is worth paying attention to the fact that acrylic powder requires some skill, since after application to the nail it quickly hardens.

Acrylic powder has unpleasant smell, which can cause headache. Therefore, it is recommended to ventilate the room before, during and after the procedure.

With matte dust

Remove old polish, file your nails and push back your cuticles.

Now apply the base and dry your nails well in a UV lamp.

Apply colored varnish. After this, you need to immediately cover the plates with topcoat and dry them in a UV lamp for two minutes. In this case, the sticky layer should not be removed.

Using a brush, apply matte dust to the nail plate and immediately remove excess.

Dry your nails in a UV lamp for two minutes.

Based on regular varnish

Based on regular varnish, there are also four main ways to perform a matte manicure.

Using a matte top

First, perform a classic manicure to prepare your nails for the main procedure.

Now apply a base coat designed for use with regular polish to the surface of your nails.

After the base has dried, feel free to apply regular colored polish to your nails.

After five minutes, apply a top matte coat to the nail plates.

Video: performing a matte manicure based on regular varnish using a top coat

Matt varnish

Get a classic manicure.

Apply base coat.

Now apply a special matte polish to your nails.

The easiest way to make a matte manicure is to buy a special varnish

Cover your nail plates with nail polish fixer and enjoy the result.

Using corn starch

First you need to do a classic manicure and apply a base coat to your nails.

Now you need to mix 4 drops of varnish with a pinch of cornstarch on the foil. It is worth noting that the last ingredient will slightly lighten the main color of the manicure.

Using cornstarch you can achieve the perfect matte finish on your nails.

The resulting mixture must be applied to the nail plates in the classical way.

Using a steam bath

Perform a classic manicure to prepare your nails for the procedure.

Apply base coat.

After a few minutes, cover the nail plates with regular colored polish in one layer.

Now apply top coating and wait until it dries completely.

Bring your hands to the steam for 15 seconds. This could be evaporation from a kettle or water in a pan. Remember not to keep your hands closer than 25 cm from the steam source.

You need to be careful with steam: it is better to keep your hands as far away from the source as possible

Video: how to make a matte manicure using steam

Photo gallery: matte manicure design ideas

Gold inserts look good on a matte black manicure. Classic matte manicure can be used as a base for various designs and decor. Purple in matte manicure is especially popular in Lately
The combination of gloss and matte is a popular trend in manicure. Classic matte manicure is a plain pastel color coating. Matte manicure in soft pink color will suit romantic natures
Green color a matte manicure will tell of a girl's good taste The matte red color is perfect for a date.

A high-quality manicure gives your hands a well-groomed appearance and charges a woman with inner confidence and good mood.

One of the most changeable fashion trends is nail design. Long nails are replacing short-cut ones and vice versa, the shape of the nail plates is also not left aside - square, pointed or oval nail shapes regularly find their fans. A special place is occupied by nail coating – varnish. Keep up with fashion trends in this case, it’s even more difficult, since stores offer a great variety of products for designing and decorating manicures. What if your shelf is replete with glossy polishes, but you need to get a matte finish on your nails?

How to make varnish matte: a professional approach

If you want your manicure to have a matte effect, use one of the following methods.

Matt lacquer

The simplest and most obvious way to get a matte manicure is to purchase the appropriate type of varnish.

• Do neat manicure. This stage is very important, since the lack of gloss makes all the unevenness of the nail more distinct.
• Apply matte polish to a dry and clean nail plate. First, brush along the central part of the nail, then along the sides.

The disadvantage of this method is that it requires too much a large number of varnishes, since in addition to the palette a matte/glossy option is added.

Special coating

Trusting the manufacturers cosmetic products, you can purchase a special coating that will create the desired matte effect. Its appeal lies not only in its convenience, but also in its versatility - the product can be applied to both regular polish and gel polish.

• Prepare your nails for applying polish - do a manicure, clean the nail plate of dirt, wipe it with a cotton pad soaked in nail polish remover.
• Cover the nail surface with your chosen polish.
• Wait until the varnish dries (not forcefully).
• Apply a matte finish.

A small drawback is that you will need to purchase an additional product. The advantage is that with this coating you are absolutely independent of color, since you can make any existing varnish matte.

How to make nail polish matte: home remedies

If you don’t want to go to the store and buy a new varnish or gloss masking product, you can experiment at home.

water vapor

It’s not difficult to get water vapor at home - boil water in a kettle or pan and that’s it, you’re done. We use it to obtain a matte effect on the nails. Advice - to obtain a uniform tone of the coating, do not paint all your nails at once, but prepare 2 - 3 fingers at a time. This way the steam will “lie” evenly on them and the coating will be more attractive.

• Get a manicure and polish your nails thoroughly.
• Degrease the nail plate.
• Apply 1 or several layers of varnish to it until you achieve the desired color intensity.
• Further important point: Without waiting for the polish to dry, place your nails over the water vapor. You shouldn’t lower your hand too low - this factor doesn’t matter at all for a manicure, and you can get burned.
• The duration of the procedure is 1 – 2 minutes. Next, wait until the varnish dries naturally.

This simple method will make you the owner of a beautiful matte varnish on the nails. At this stage, you can stop, or you can decorate, for example, completing the manicure by applying glossy patterns to match.

Starch

If you find starch (potato or corn) in your home, feel free to use it for creative experiments.

• Prepare your nails for applying varnish - perform a manicure, polish and degrease the nail plate.
• Place some starch in a bowl.
• Apply a few drops of varnish to the palette and add starch to them. Make sure that the starch does not make the varnish thick; do not add too much of it.
• Stir the mixture until smooth.
• Apply the resulting product to your nails.
• The varnish dries naturally.

It is worth considering that as a result of manipulations with starch, the shade of the coating becomes lighter.

Experiment not only with the color and shape of your nails, but also with the texture of the coating, and then your nails will always be in the eye of fashionistas.

Do you want your hands to look amazing on a date, holiday party or just at work? We will tell you all the nuances of how to easily and quickly do a matte manicure with your own hands - the main trend in modern nail art. This manicure creates a velvet effect on your hands. It suits both casual style and romantic evening look. Overall it is quite versatile, but it all depends on what color polish you choose.

A set of necessary tools

Matte varnish is sold in stores, but a quality product is quite expensive - approximately 250 rubles per color. As they say, you can’t go far with one shade, so we’ll tell you how to create a matte effect on your nails at home using regular polish.

In order to achieve the velvet effect on your nails, in addition to your own curiosity and creativity, you will need:

1. An honorable inhabitant of every self-respecting kitchen is an electric kettle. Or a small container in which you can boil water.
2. Nail polish in the shade you like or several different shades - depending on whether you want to further decorate your nails.
3. Nail polish remover with multiple cotton pads or hygienically and with chopsticks.
4. 10 nails that went through the preparation procedure.

That's all, actually.

Preparation

In order for the polish to apply smoothly and the manicure to last longer, it is necessary to clean the nails, remove the previous coating, and degrease them using nail polish remover. There is no need to moisturize your hands with cream; this may affect the uniformity of the nail coating.

Any manicure and decor looks untidy on unkempt hands, and a matte manicure even more so, since it always draws attention to the hands. Therefore, you need to carefully file your nails, give them the same shape, and, if necessary, remove hangnails and cuticles - just as you usually do.

To do a matte manicure at home, you will need approximately 30 minutes. Please note that you cannot apply a quick-drying fixer, since in this case all the velvety will disappear. Therefore, make sure that nothing prevents you from waiting for the natural drying of the moisture and the coating on your nails.

Magic metamorphosis step by step

1. Turn on the kettle and wait until the water gets very hot or boils - we need intense steam generation to occur.
2. On the prepared nails we apply the usual varnish that you like. We must achieve a dense, uniform, rich color, so apply varnish in 2-3 layers without streaks or transitions.
3. The nails should not dry out, so 10 seconds after application, when the varnish is evenly distributed, we expose the nails to steam. We hold our hand at a height of 10-15 centimeters, so as not to get burned.
4. We hold the nails over the steam for 1-1.5 minutes.
5. Do not wet your nails with anything, everything should dry naturally. As the water dries, a matte effect appears.
6. After the matte varnish has dried, you can begin decorating your nails.

As you can see, it’s sleight of hand and no magic.

1. Light colors do not look very expressive in this version of the manicure, so choose more saturated cool shades: gray blue, gray, gray-lilac, blue, ash, black, emerald, fuchsia.
2. If the varnish contains glitter or pearl, the nails will look a little dirty, so choose plain varnishes.
3. This manicure looks best on oval nails. On square ones it may look a little rough.
4. For a more uniform and uniform result, do not apply polish to all nails at once. First, cover 2-3 nails, create a matte effect, then proceed to the next ones.
5. If someone finds a solid matte manicure too restrained, you can add glossy accents. To do this, take a transparent or colored glossy varnish and apply it to the free edge of the nail to make a French manicure, put dots or draw any design. It will stand out textured against the background of velvet. Either the same shade or a regular clear varnish looks most impressive.
6. don't use thick cream for hands. This neutralizes the velvety effect.

Video: 5 ways to get matte nails

Don’t be afraid to complement your image with interesting details, unusual solutions, and fashionable inventions.

The coating on the nails with a matte effect looks elegant, gentle, and attracts the eye. You can get a matte manicure not only in a beauty salon, but also at home.

How to make a matte manicure at home

Gloss on nails - timeless classic. But you always want to add something new and unusual to your manicure. One of the types of coatings that dilute an already boring design is matte.

There are several ways:

• use of a top coat with a matte effect;
• using steam to remove gloss;
• use of flour.

What these three options have in common is that the applied varnish must be completely dry to achieve the expected effect. Let's look at each method, highlighting the pros and cons.

Top coating

The easiest way is to cover your nails with matte varnish. This solution is available for both regular varnishes, and for gel polishes. Manufacturers have long been presenting products in different price segments; even in an ordinary household store you can find varnish with a matting effect.

First you should apply the top coat, then cover your nails with one or two layers of polish.

For gel polish, you must first remove the sticky layer from the nail so that the coating is as matte as possible. If the top coat has residual stickiness, it should not be removed immediately; it is better to wait 3-5 minutes for the nails to cool completely, otherwise there is a risk of getting a cloudy coating.

• available;
• comfortable;
• does not require time investment.

Steam application

The most inexpensive way is to use steam to create a matte finish. In this case, all you need is a pot of boiling water and patience.

Apply a base coat to your nails, then one thin coat of colored polish, wait until it dries before applying a second coat. The procedure must be performed one by one for each nail so that the polish does not dry out.

After applying the second coat, hold your nails over the steam so as not to burn yourself. You need to keep it on for about two minutes so that the coating has time to set and lose its gloss.

This manicure will take much more time than simply applying a top coat with a matte effect.

To get the desired effect, keep your nails over steam for at least 2-3 minutes.

• can be done without using additional materials: only base and colored varnish;
• looks almost the same as using a matte finish.

• take a lot of time;
• unsafe;
• may look sloppy if you are not careful.

Using flour

To perform this method you will need flour, a sieve, a container and a soft makeup brush. This method allows you to make all your nails matte at once, so it will take less time than the previous method.

1. Start by applying the color coat.
2. Next, pour a little flour into the container and pick up the product with a fluffy, soft brush, shaking off the excess.
3. Run the brush over the nail, as if rubbing flour, but not too much, otherwise there is a risk of ruining the coating.
4. After this, dip your nail in water to dissolve any lumps of flour. If any remain, gently brush them off, being careful not to damage the finish.
5. Do not apply topcoat; it will make the finish glossy again.

• no additional funds are needed, everything is necessary in every home;
• safely;
• simple enough.

The last two methods are only suitable for regular varnishes, since an ultraviolet lamp is required to dry the gel polish. It is simpler and easier to purchase a matte finish: it is more convenient to work with, it does its job efficiently, additionally strengthens the nails, and makes the coating more durable.

Video bonus: how to create a matte effect

See also our selection of photos with matte manicure ideas:.

Every girl can do a matte finish. This coating looks discreet, but very stylish and elegant. You can create this effect even at home.

Relatively recently, regular clients of beauty salons tried out a new development - long-lasting varnish, also known as gel polish or Shellac.

His distinctive features, such as a long wear period and the ability to quickly grow your own nails under the coating, instantly made it popular among women.

Gel polish has become fashionable, just like various options its design. One of the most popular is a matte manicure - when the nail coating is devoid of the characteristic velvet shine. You will learn more about what matte “Shellac” is, how to make it at home and how to decorate it further in this article.

In order to understand what it is matte gel polish, let's briefly look at the basic procedure for applying gel polish on nails. The standard diagram looks like this.

Preparing the nail for applying the first layer of the system– degreasing and treatment with a primer, which improves the adhesion of the material to the nail plate; then applying a base layer, drying in a lamp(it is important to remember that gel polish does not dry in air, only in a UV or hybrid lamp!); directly applying colored gel polish in several layers to obtain the desired pigmentation and coverage density, and in the end - applying the final coating - top.

A regular top coat for gel polish gives long lasting glossy shine for several weeks, and protects the coating from minor damage. The idea of ​​a matte manicure is the absence of shine on nail plate, the coating with this design option is truly matte and velvety.

Matte manicure more durable, but has one unpleasant feature - on light shades of gel polish, the matte coating quickly gets dirty.

Even at the first experience of wearing such a design, a girl may be surprised by the rough surface of the nail; this is not familiar to everyone and sometimes causes a certain psychological discomfort.

In general, matte Shellac rightfully holds one of the leading positions among nail designs. This manicure looks expensive, looks great with dark shades of varnish, is suitable for office workers, and at the same time remains in trend for a long time. If you have never tried this manicure before, we are sure that after the first experience you will truly love it.

How to make matte shellac: all the methods

Now let's move on to the most interesting part. Let's talk about how to do a matte manicure easy and without unnecessary problems. These methods are suitable for both nail artists and girls who apply gel polish on their own.

Total options to achieve a matte finish, there is three: special matte top; sawing off the glossy top coat with a buff or file with soft abrasiveness and using acrylic powder.

Last option simplest in execution, and gives not just a matte finish, but the effect of real velvet on the nails. Hence its second name - “velvet manicure”, or “velvet sand”.

Most easy way get a matte finish - use special top. The best manufacturers are KODI and Masura, the top coatings of the E.MI and Canni line have also proven themselves positively. The usual budget Bluesky, despite the manufacturer's loud promises, still gives a satin finish, which cannot be called truly matte with complete confidence.

The most popular technique among masters is the technique of performing matte manicure using acrylic powder. Why? You will find out by reading the section below.

Techniques to perform at home

Now let's look at each of the described methods in detail, starting with the easiest.

Matte Shellac using a buff

In order to do using a buff matte manicure, you will need the buff itself - if you already have a coating on your nails and a glossy top coat applied. Buff is a rectangular file with soft abrasiveness, designed to remove shine from natural nails. Sold in any nail design store.

If the coating is already ready, you only need remove shine from top coat using a buff. This is done with light movements, in the direction from the cuticle to the free edge of the nail.

You don't have to work hard to get it desired result, just go lightly over the surface of the top with a nail file.

If you file too vigorously, you will not only remove the shine from the final layer, but also damage the gel polish coating itself.

Disadvantage of the method: requires time, it is easy to damage the coating itself.

Matte manicure using acrylic powder

The ideal method, according to the author's biased opinion. For it you will need any transparent acrylic powder, even the Chinese one from AliExpress for 50 rubles will do. The jar lasts for a very long time, consumption is economical.

Follow the standard steps for applying gel polish:

• degrease the nail, cover with primer;
• apply the base in a thin layer, dry in a lamp for 1 to 3 minutes (1 minute for hybrid and LED lamps, 3 minutes in a 36 W UV lamp);
• Without removing the sticky layer from the base, apply the first layer of gel polish and dry;
• Apply the required amount of gel polish to the nails, not forgetting to seal the end of the nail, dry each layer;
• apply a regular topcoat with a sticky layer, and – ATTENTION!, - do not dry it.

Now, actually, myself application technology acrylic powder on top. Open the jar and take a pusher or tip - something with which you can scoop out the required amount of acrylic powder. Place your finger over the jar to avoid wasting acrylic.

Sprinkle the powder generously onto your nails and repeat with all fingers of one hand. Place your nails in the lamp for 1-3 minutes. Brush off the remaining powder with a brush - either a regular makeup brush or a fan brush for nail design will do. All! Your matte design is ready.

An even easier way to use acrylic is to simply dip the nail into acrylic powder, making sure that its entire surface is evenly covered with powder.

We do the same with the second hand. The perfect velvet manicure is ready! It turns out right the first time, even for beginners.

Matte Shellac using a matte topcoat

Usage this method even simpler. For this you will need a special matte coating instead of the usual topcoat. You can purchase it at any store that sells materials for nails and nail design. It is better to buy a high-quality top coating, as it will not cause you problems and will be durable to wear. The ideal option is KODI.

We follow all the steps to apply gel polish, at the end instead of the usual top coat apply matte. Dry thoroughly in a lamp - from 1 to 4 minutes (1 minute for hybrid and LED, 4 minutes for 36 W UV lamps). Remove the sticky layer and voila! Matte manicure is ready.

As you can see, nothing complicated.

Pattern and design ideas for matte Shellac

Upon request and subject to availability necessary tools and materials, matte nails can be further decorate. To create a spectacular manicure, the following techniques are well suited:

• monograms (made with acrylic or gel paint);
• casting (it will require special foil);
• decoration with rhinestones;
• stamping (insane variety of patterns, for a matte finish it is better to use acrylic paints for stamping);
• liquid stones.

Not compatible with a matte manicure, sliders - they must be applied under a glossy top coat. You should also avoid mirror rubbing and “broken glass”.

Otherwise, you should use your imagination and create! Although the advantage of matte gel polish is definitely the fact that even without additional decorations it looks incredibly stylish and aesthetically pleasing.