DIY branded earrings. Long beaded earrings and cone hats

Homemade earrings are an opportunity not only to have fun, but also to get unique accessory. Homemade jewelry looks no worse than purchased jewelry, but it brings more satisfaction. How to make earrings with your own hands and what you need for this will be discussed in this article.

Accessories and tools for creating homemade earrings

Before you start making earrings, you need to think about what you will wear them with. The benefit of homemade earrings is that you can choose the material and color that perfectly complements your outfit. Show your imagination and figure out what kind of earrings they should be. If you have already drawn them in your mind, feel free to bring the idea to life.

The next step is going to the store to buy materials. Beads, seed beads, stones, leather, lace, polymer clay— what will you need to create your earrings? Select details by carefully considering the combination of colors, materials and shapes.

In addition to jewelry, earrings need fittings - devices on which all this beauty will be attached. Here are the details you can't do without:

• Schwenz. This is the part that fits into the ear.
• Carnations. They can be chosen instead of earrings. There are carnations different sizes. In addition, there are studs to which jewelry is attached, like to an earring, and there are those to which a bead is simply glued.
• Pins (jewelry studs) and pins for fastening parts. They come in different sizes and colors, so choosing the right ones won't be difficult.
• Huggers. In addition to their decorative function, they secure the bead when the jewelry studs fly out from behind the large hole.
• Stoppers. Designed for discreet fixation of some elements of earrings.
• Chains. You can hang decorations on them.

When the material and accessories were decided, it was time for the tools. To make handmade earrings, you will need pliers, round nose pliers, thin nose pliers and wire cutters.

Step-by-step description of making earrings from beads

Easiest to make bead earrings. Even a novice craftswoman will find it easy to make these beautiful earrings. Take two beads (one for each earring). In principle, this amount can be increased if desired. Two earrings and two jewelry studs, or pins. Now the procedure:

• String beads onto jewelry studs. The hat should point down.
• Secure the nail using needle nose pliers. To do this, bend its upper part so that it is perpendicular to the bead.
• Leaving a twig about 7 mm long, bite off the excess using pliers.
• Take the bead so that the bent part is facing the master, use round pliers to grab the tip of the nail and make rotational movements clockwise. In this case, the tip of the nail should be screwed onto the cheek of the pliers.
• Stop when the ring has closed. You can lightly press the tip of the ring to the base.
• All that remains is to attach the earrings, slightly spreading the rings on the nails. After fastening the parts, close the rings again.
• Earrings with beads are ready.

Do stud earrings It’s even simpler: just glue the bead to the blank, and the decoration is ready.

If you are not new to making earrings, you can try to make something more complex. For example, earrings from polymer clay. The scope for imagination here is enormous - after all, clay can take any shape you want. You can mix colors to get new shades.

Earrings made of lace look interesting and unusual. Delicate and fragile, they can complement even Wedding Dress. And making them is not at all difficult, especially if you already have some experience in making homemade earrings.

Making earrings from beads is a rather labor-intensive process, but at the same time very exciting. Using different techniques weaving, you can create a huge number of unique and beautiful decorations.

Tassel earrings are simple and quick to make, but look very impressive. A novice craftswoman can try her hand at creating just such earrings.

Making homemade earrings is very exciting process. How nice it is to wear jewelry made with my own hands, accept compliments and praise!

Homemade earrings: master classes

The new review brings to the attention of readers 12 stylish jewelry, each of which can be made with due diligence and attention to the issue with your own hands. Definitely, any of these crafts will help make a positive impression on others, so take a look and remember.

1. Thread earrings

Original long earrings that will be a wonderful addition to both everyday look, and for the evening, and the process of creating them will take no more than half an hour. To create such earrings, you need a skein of floss thread of the color you like, which you need to carefully cut, form two tassels, attach loops to them, secure with a thread of a contrasting color and put on base hooks purchased in a specialized store.

2. Necklace made of pins

Using safety pins of the same color and size, beads, and two strong cords, you can create an unusual and very impressive necklace that will become an elegant addition to any look.

3. Resin pendants

You can create incredibly beautiful pendants from epoxy resin without much skill or effort. To do this, you need to put dried flowers, shells, beads or sparkles in special silicone molds, fill them with epoxy resin, pre-mixed with a hardener, and wait for it to harden.

4. Glitter pendant

A simple and at the same time very attractive shimmering pendant that you can make yourself from a metal base, decoupage glue and glitter. The glitter should be carefully laid out in layers on a base coated with glue. Each new layer must be smeared with glue and filled with glitter until they fill the entire pendant.

5. Bright necklace

A stunning large dyed bean necklace will be a wonderful addition to your spring and summer look. The painted beans along with the fittings must be glued onto thin plastic according to a specially prepared template. When the layout is finished and the glue has dried, the necklace needs to be carefully cut out, holes made on the sides and secured to the chain.

6. Asymmetrical necklace

An original asymmetrical necklace in the Christian Dior style, which can be made from a hoop by sewing strings of beads of different lengths to it.

7. Choker

An ultra-fashionable choker with a ring in the middle, which is not at all difficult to make with your own hands. To do this, using glue and a small ring, you need to fasten two identical pieces of thin velvet ribbon and equip the product with a clasp or ties.

8. Statement necklace

An original massive necklace made of rope and knots, which, despite the simplicity of its creation, will become a universal decoration and addition to any outfit.

9. Necklace-harness

An ordinary clothesline can be braided with threads of beads and you can create a unique and very beautiful neck decoration that will undoubtedly attract attention to its owner.

10. Wooden earrings

From small wooden blocks, special fittings, glue and varnish you can make unique long earrings that will surely appeal to all lovers natural materials and connoisseurs of creative things.

11. Dream catchers

Simple to make, but at the same time beautiful and airy talisman earrings, which you can make yourself from special fittings, small rings, wire, threads and feathers.

12. Voluminous necklace

Leather accessories always look expensive and elegant, and if the product is also made with your own hands, it automatically becomes exclusive. Getting a unique necklace is not difficult at all. You just need to cut out several identical petals from the leather and give them the required form, fasten together with glue and connect with a chain.

With the help of accessories you can add sophistication to your look. Especially earrings can create a highlight. Any girl can make unique earrings with her own hands, from scrap materials.

Every housewife probably has beads, ribbons, pieces of wire, etc. All that remains is to supplement this set with hooks for earrings, and you can start creative process, which will take a minimum of time. Photos of ideas on how to make earrings with your own hands.

DIY Ganutel earrings

The history of the origin of the popular Ganutel technique originates from the monks of the Mediterranean Sea.

Tools for work:

• Wire (50 cm), or wire spiral (4-5 cm), wire for beads is acceptable.
• Wire with a diameter of 3 mm, length 20 cm;
• For decoration (beads, seed beads, colored threads, etc.);
• Tools: wire cutters and pliers.

Making earrings

If there is no ready-made spiral, we make it. We wind the wire tightly around a knitting needle with a diameter of 4 mm. Next, we release the finished spiral from the knitting needle and stretch it out a little, increasing it 3 times in length.

We thread a thick wire into the center of the spring and create the base of the desired geometric shape. We twist the ends of the wires.

We fix the end at the top of the warp, and wind the thread in the desired order (vertically or horizontally), but following the rule, the thread should fit into each turn of the spiral.

By twisting the thread, you can decorate it to your taste by threading beads or glass beads into it.

We tie the thread well, and with the help of wire cutters we bite off a thick wire, and twist it in a thin spiral, making a loop out of it. Having selected a bead of the desired color, we attach it to the earring.

The hand-made Ganutel ear decoration is ready!

Tools at hand for making exclusive earrings

From fabric

To make long earrings with your own hands, you need the following materials: fabric (ribbon, braid), scissors, wire, beads and seed beads, tools (nippers, pliers).

• We cut 10 cm of wire diagonally for more convenient puncture of the material;
• We treat the ends of the fabric with fire so that they do not fray. We thread the wire into the tape (braid), stitches 2 mm long;
• From two edges of the material, thread beads of the desired color;
• Using pliers, carefully twist the wire;
• We put the twists into beads, construct a loop from a metal thread and attach a wire hook to it.

Earrings made of threads

Making brush earrings with your own hands using threads is not at all difficult. Required Tools colored threads (floss), narrow ribbons, wire, scissors, pliers, wire cutters. The color of the threads is selected based on taste preferences.

We make cuts from threads of 10 cm each. We wrap it in the center with wire, very tightly. Use pliers to twist the wire and remove excess with wire cutters. We hide the twisted metal thread in the product and attach the ring.

We bend the threads in half and wrap them tightly in the center with wire several times (about 5 times). We twist it tightly with pliers and hide the earrings inside. Carefully straighten the threads with scissors. You can hide a twist under the beads. Another original set is ready!

Earrings made of wire

Ear decorations made of metal thread are always exclusive.

This section presents a master class on how to make earrings with your own hands.

Necessary materials wire, hooks for earrings, 6 connecting rings, decorative elements, metal pendants, tools (cutters, pliers) are also needed.

• Cut 3 pieces of metal thread;
• Divide one of the cut pieces in two, wrap the large coil in the form of a loop;
• Decorate the free edge with beads and pendants, and make a loop on the other side;
• Do the same with the small ring;
• Put a larger circle, a smaller one and a ring on the connecting ring;
• Duplicate on the other side;
• Connect the ring with a hook and secure with a loop.

Bead earrings

Earrings made from beads and seed beads can be made very quickly with your own hands. Required materials: beads, fittings and pliers.

• Thread decorative elements in the form of beads into the wire;
• Bite off the remaining metal thread, leaving 8 mm, for the loop;
• Hook the loop onto the hook;
• Repeat all of the above with the second earring.

Making a cuff with your own hands

Cuffs have been at the peak of popularity for several seasons now. You need to have wire and pliers.

• Bite off a piece of wire 7.5 cm long.
• Fold it 2.5 cm, and bend it one more time.
• Bend the wire into rings on both sides, fold the product in half, and pinch the ends with pliers. Cuffs are ready!

Earrings made by yourself will always be unique. This is an excellent addition to the wardrobe, which will not lose its relevance, and will also skillfully emphasize the individuality of the owner.

DIY photo of earrings

Almost every woman pays great attention to the details of her image, namely jewelry. The most popular element are earrings. If you want to add a certain amount of personality, make your own earrings. They will become a great gift for a friend or child. Almost nothing limits your imagination, and you can use absolutely any materials for your work. Most often, jewelry is made from beads, polymer clay, beads, etc.

Required materials and tools

In order to make your work easier, it is important to prepare the tools with which you will form your product. You will also definitely need various types of accessories. It can be purchased at almost any craft store. And of course, select the materials that will allow you to express your imagination.

Earrings can be made from:

In order to string beads or beads, stock up on wire. Use clamps and plugs to secure. A required element is hooks. Pay attention to their quality, because you will put them in your ears. You may also need metal rings and other fasteners for beads.

To make it easier to create earrings with your own hands, select the appropriate tools. These include various tweezers, stacks, scissors and pliers. A hot glue gun may also come in handy.

Beads

The simplest and affordable option– make your own bead earrings. If the size of the product is supposed to be small, it will be enough to use leftover material, which is probably found in every home. You can create stunningly beautiful jewelry from beads, despite the fact that this material is one of the most affordable and easiest to work with.

Here are a few basic ideas for earrings:

Beads

It is very easy to create earrings from beads with your own hands.

One pair may only need a few beads. These elements can be of different sizes, and they can additionally be combined with beads and other materials. Depending on the stylistic bias, it is fashionable to use different materials.

For example, plastic beads are more suitable for children's jewelry. For glamorous and elegant models, you need to take samples that imitate pearls and precious stones.

For ethnic motifs, it is worth looking for models of beads made of wood or openwork metal. For earrings with an unusual texture, you can make the details yourself from polymer clay, although it will be quite difficult to get the same dimensions.

They can be connected using fishing line, wire, ribbons and rings. You can even use crochet elements. In general, it all depends on your imagination.

Feathers

In order to make simple but very beautiful earrings, you can use feathers as the main decorative element. You can buy suitable ones at a handmade store, but you shouldn’t take ordinary bird feathers from the street, as you can catch a serious illness.

In order to make a decoration you need to use clips to fix the feather. As additional elements, you can use beads and beads, metal rings and blanks for earrings, or a simple chain. Using threads you can make a miniature dream catcher.

Ribbons

A very popular element for homemade jewelry are satin ribbons and organza.

How to make earrings from them with your own hands? If you use the kanzashi technique, you can get by with just ribbons. However, most often they are combined with beads. The ribbon can serve as a fastening for elements or as a decorative detail, for example, a bow on top.

To prevent the edges from unraveling, be sure to burn the ribbon on fire. If you want to make a fringe out of it, then burn only one edge, and unravel the material from the second.

Lace

Earrings made of lace look very elegant and unusual. To make them yourself, you can buy a small piece of fabric or lace ribbon. This simplest option, but it can be a little expensive.

But all you need to do is select an element that is suitable in shape and size, cut it out of the overall composition and secure it to a hook using a metal ring.

To prevent the lace from looking lonely, you can decorate it with beads, small beads or adhesive rhinestones. At the same time, there is no need to be zealous so as not to turn a laconic decoration into a motley composition oversaturated with details.

You can also make earrings from handmade lace. To do this, you need to use weaving techniques, for example, macrame or tatting, etc. For work, take thin but strong threads. For convenience, draw a template on paper and place it on a pillow with needles, around which the lace element will weave.

Polymer clay

In order to make earrings from polymer clay directly with your own hands, you will need high-quality material. You can buy a set of polymer clay at a craft supply store. Depending on the manufacturer and composition, different samples of polymer clay may differ in price several times.

Working with it is no more difficult than with plasticine. First, knead the material well. In order to form earrings from polymer clay, you can give it the shape of a flower, ordinary beads, berries, and other figures. If you don’t know what to come up with, you can look at a ready-made idea. These earrings are sold among other jewelry. This is an excellent option for both children and youth, as well as adult women, because you can make anything out of plastic.

The finished dried product needs to be fired, for example, in the oven. In order to fix the hooks, you can insert the wire into the wet clay or make holes in it, into which, after firing, you will insert the fasteners.

Cold porcelain

You can also try making earrings with your own hands from a material similar to polymer clay samples - cold porcelain. Original material It is sold in art stores, but it costs a lot, so most often its analogue is brewed at home. To do this, you need to mix PVA glue grade D (with plasticizers) and corn starch with soda in equal proportions.

Today we will talk about assembling earrings from beads, which you can do with your own hands without any special experience or knowledge of any equipment. For such work, you will need a standard set of accessories: beads, earrings, pins, caps, connectors, etc. In the master class we will also show one of the ways to assemble earrings from beads.

To make stylish and beautiful earrings with your own hands, you don’t have to master any particular technique. It is enough to purchase a small supply of accessories for jewelry and show a little imagination. Even in simple design, earrings made of beads can look elegant and fashionable. Beads can be made of different types of material and have a variety of shapes.

An example of DIY bead earrings, where only earrings and beads are used. Just choose your favorite bead or earring, then connect them using a pin loop and your laconic and delicate earrings are ready.

Cups and caps for beads will help to highlight the bead.

Bead earrings can be made using wire.

Earrings made of beads, where the bead is made of beads, clay, glass, etc. If you do not know any of these techniques, such beads can also be purchased ready-made and simply connected to a hook.

Earrings rings. And everything is simple here. We string the desired beads onto the base and the decoration is ready.

You can make ring-shaped earrings from beads with your own hands using a cable or various wires.

Earrings made of beads in the form of clusters.

Elongated types of bead earrings. To do this, you can use a long pin, collect the required number of beads on it, or connect several pieces at once using pins and thereby lengthen the work.

Earrings made of beads with chains.

You can also decorate bead earrings with frames, unusual earrings or pendants.

Earrings made of beads in the form of bells.

And, of course, an easy way to decorate bead earrings is by using connectors.

In the master class we will assemble earrings from beads, where the bead will consist of the beads themselves.

Accessories:

Beads 4mm - 24 pcs

Pins with loop 2 pcs.

Ear hooks 1 pair

Moth pendant 2 pcs

Monofilament

Tools: Scissors, side cutters, round nose pliers.

Assembly:

To work we will need the following weaving pattern:

We string three beads onto a monofilament thread. We draw the edges of the fishing line towards each other through the fourth bead. We tighten it.

Now we string one bead on each edge of the monofilament and draw the edges of the fishing line through one additional bead. We weave a cross pattern three times. Then add one bead again to each edge of the monofilament.

We pass the edges of the fishing line through the very first bead in the pattern, rolling our weaving into a ball, which will act as a finished bead.

Next, we collect the earrings. We connect the loop of the pin with the loop of the shvenza. We string one separate bead, a blank of beads, and again one bead onto the pin. We move the beads to the shwenze. We shorten the pin column with side cutters and, using round pliers, shape the edge of the pin into a loop, connecting it with a pendant in the shape of a moth.

The bead earrings are ready!