Satin ribbon bow for discharge. How to make a bow for discharge from the maternity hospital with your own hands using the kanzashi technique - description and photo

The day a baby is discharged from the hospital is the most special moment for the whole family. Expectant mothers prepare for this event in advance and pay attention to even the smallest details in order to give everyone a festive mood. Maternity hospital discharge ribbon is a fairly popular, delicate and unique component of celebration decor for beautifully tying a blanket with your baby. But how to make a bow for discharge from the hospital? It is very easy and simple to make such a decoration at home with your own hands, following a detailed master class.

To implement the idea you will need basic materials, inspiration and free time.

To make a DIY bow for a newborn baby's discharge you need to buy materials such as:

The work takes place in three stages:

Since the main decoration will be the main decoration, we collect it first. The bow has the appearance of flower petals, which are superimposed on the base. To make it, cut 8 cm strips of ribbon of white and other colors. We fold the petal with tweezers and burn the edge.
In a series of layers we glue the petals with transparent glue onto a base in the shape of a circle. We decorate the middle with a bead or pebble. Behind the bow we make a loop from a piece of ribbon. This is necessary for its movement along the base.
The length of the main ribbon should be approximately 1.6–1.7 m. We decorate its ends to create originality. To do this, you need to step back a few cm from the edge and make small bows. Petals are made using a similar principle. We attach a beautiful bow to the envelope.

Discharge bow for girls

A girl should always look great, even if she was born just a couple of days ago. For a newborn, the bow on the envelope should be delicate and at the same time exclusive. To implement the idea such materials will be required, How:

Making a bow for a young lady takes three steps:

First, cut six pieces of each type of ribbon; their edges must be singed. Using a thread and a needle, we collect petals from the widest ribbon into a flower, and others into petals.
Glue the remaining petals to the main flower. We make 27 small petals from the main ribbon. The base can be in the form of felt, thick fabric or cardboard. It is necessary to glue small petals onto it, which should be decorated with a pebble or bead on top.
The two parts of the flower are assembled, the tape is glued to the back. Beautiful decoration ready. If desired, you can insert an elastic band.

Kanzashi bow for discharge

Making the base of the bow. It consists of glued tapes. The lace base is the middle level of the workpiece. A flower with large rounded petals - the upper part. This is the correct sequence for creating a bow for a newborn. Next you need to follow the following steps of the master class:

Exclusive bow for discharge from ribbons with your own hands It will not only decorate the envelope, but will also warm the newborn with mother’s warmth and love. No wonder there is a belief that such things become a talisman for the baby. long years.

When you or your loved ones have a baby, new life Not only the baby himself starts, but also his parents. The cub is protected from prying sidelong glances, but at the same time they dress it up in colorful diapers. And a beautiful discharge bow, made with your own hands, becomes an indispensable attribute of a child’s first wardrobe.

To make this wonderful accessory for a newborn, first of all, do some preliminary preparation for work. Collect everything necessary tools and materials, only then get down to business.

What is needed for this?

You will need about four meters of soft (pink, blue, beige, etc.). Its width should be two and a half centimeters. Prepare another strip of this material with the same parameters. But it should be darker than the previous one.

To decorate for graduation, use colored or white rhinestones. Also for decoration you will need light openwork lace, which will go well with the main material.

In order to trim the edges of the parts, you will need a candle or lighter. And to fasten the elements together, use strong glue or a needle and thread (thin fishing line can also be useful for this work).

Let's get started

Let's start making a bow for discharge with our own hands; it will consist of several layers. Bottom row Let's form it from light petals. To do this, cut the light tape into pieces of 20 centimeters each.

The next tier must be made of darker satin. So that the tips of the petals that lie under it look out.

To make a beautiful bow for graduation, you need to ensure that its parts are positioned symmetrically to each other. To achieve this result, start working on each layer by gluing (or stitching) the cuts at right angles in pairs.

After this, fold one edge of the strip that is located below. Glue its tip in the central part. Then do this operation with the remaining edges. You get two independent parts. Fasten them together so that you get a neat cross.

Correct fixation

Now glue two finished identical shapes so that none of their loops completely overlap the others. Using the same principle, make the next tier, which will be darker in color. Depending on which method of fixation you choose (stitching or gluing), the ribbon bow for discharge will have a certain shape.

Attach the top layer of the craft to the bottom. At the same time, make sure that their centers overlap each other perfectly. This way you can ensure that the edges overlap each other to the same length. That is, the loops from the bottom layer will protrude at the same distance from under the top ones in any part of the craft.

Additional accent

To make an original bow for graduation, the master class recommends making another tier of it from openwork lace or light, woven braid. This one is gentle and air element the decor will be in the center of the overall composition. To work on it you will need about 16 centimeters of this material.

Find the middle of the finished cut. Then fix one edge of it in the middle of the workpiece. Fold the strip in half and secure the other side in the same place. The fixation must be carried out in such a way that the lace eventually forms a figure eight. Securely fasten the resulting part to the previously made base.

We continue to decorate

The discharge bow, created by yourself, can be additionally decorated in the central part. For example, if it is intended for a boy, use a fabric star for this purpose. A delicate flower is perfect for a girl.

To make it, cut 6 strips of 9 centimeters each from the tape. Each of them must be bent in half so that its halves form a right angle. Then connect the ends together - and get a beautiful finished petal.

To give the parts of the flower additional volume and greater relief, collect each of them at the base. After this, oblong tubercles and depressions will appear on the surface.

Solder the bottom of the part using a candle or lighter. This way you will make the petals more durable, they will not delaminate. Sew each of them at the base so that the parts hold their shape better.

Now connect the finished elements together. Cut out a small circle from satin. It will be the core of the future flower and will help you cover the place where the petals are fixed at their base. When the blossoming bud is ready, attach it in the center of the bow you made earlier.

We place accents

To make the graduation bow (you can make a masterpiece with your own hands) even more festive and bright, you can use rhinestones. Glue shiny pebbles to the edges of the craft and in its center.

If the crystals are small, use a damp toothpick to press them onto the fabric. You need to attach it very carefully so as not to smear the glue, which will then be difficult to remove from the fabric without spoiling its appearance.

Rhinestones can be the same color as the main material from which the craft is made, or white. If you have enough patience, you can put a congratulatory inscription out of them on ribbons, which you will attach to the product a little later.

Working with ponytails

Answering the question “How to make a bow for discharge?”, you need Special attention give it to the ponytails. To make them, cut about two meters of light tape and treat its ends with fire. Before doing this, either cut them at an angle, or use scissors to make notches in them in the shape of triangles.

Make two small bows from darker satin. For each of them you will need one strip for the loops and a shorter one for the central part. Place the ends of the tape on each other, press them to the middle of the cut and sew.

In this case, it is necessary to use threads and not glue for fixation, since they will not interfere with you making beautiful folds on the part. Before discharge, attach central strips to these auxiliary parts, which will cover the place where they meet the tails.

Finally

Glue them to the ends of the previously prepared tape. Place them not at the very edge, but step back from it by about ten centimeters. This concludes your work on this wonderful craft.

Now you know how to make a bow for graduation. In ancient times, it was believed that any handmade items or accessories could protect a baby from the evil eye. Therefore, your creation will become not only an excellent decoration, but also a good amulet for a child.

The day when a baby is brought home from the hospital becomes special in the life of any family. They prepare for it in advance, thinking through even the smallest details that help create festive mood. A beautiful and especially popular decorative element today is the bow for discharge from the maternity hospital. It’s not at all difficult to make such a decoration for your baby with your own hands. This will require a little time, inspiration and very simple materials.

Typically, bows for discharge from the maternity hospital are made using the “kanzashi” technique. This is a type of needlework that allows you to create decorations in the form of wonderful flowers from fabric (usually satin and organza ribbons). This art came to us from Japan, where geisha decorated their hair with flowers made of silk with the addition of elements made of wood, precious and semi-precious stones and metals. In Japanese culture, this type of decoration served not only as a decorative element, but also indicated the status, age and origin of its owner. With the advent of kanzashi to the West, this decoration lost its social connotation, becoming simply beautiful accessory, which everyone can create to their own taste.

A bow for a newborn can be of absolutely any color - it depends on the gender of the child or on your color preferences. If you decide to create a bow for discharge from the maternity hospital with your own hands, below you will find photos of several options and a description.

Two-color bow

To create such a bow you will need:

satin ribbon 2 colors. In this case, lilac and white ribbons 3.5 cm wide were used, and ribbon lilac color width 2.5 cm;
scissors;
threads, needle;
heat gun;
lighter (or soldering iron).

Manufacturing instructions:

First we make the bottom flower. Cut 7 pieces of lilac ribbon 8 cm long; to form petals, bend the right edge of each piece in the middle at an angle of 90.
Now align the left end of the ribbon with the right, bending it in the same way.
Having folded the remaining 6 segments in the same way, sew all the petals together with a thread and a needle.
Tighten the thread and you will have the bottom flower.
Now let's make the second flower (in our example it white). Cut 8 white squares and fold each one in half to form a triangle.
Now fold the right and left corners of the triangle, aligning them at the top corner.
By bending the resulting structure in the middle (along the line that formed between the 2 triangles), you will get a petal. Using a lighter or thread, solder the ends of the resulting petal.
Cut off any excess corners to make the petal flatter.
Make 7 more white petals in the same way.
Now you need to make 16 small lilac petals in exactly the same way.
When all the petals are ready, you can collect the second flower. Sew all the white petals together like this:
After this, you need to place 2 lilac petals inside each petal of a white flower, gluing them with a heat gun (or carefully stitching them together).
Cut a circle with a diameter of 2.5 cm from felt and glue it to the back of the white flower.
Now you can fasten the lilac base flower and the white flower.
You can attach a flat bead or rhinestone in the center to cover the junction of the petals and give the flower a finished look.

Kanzashi "Astra"

You will need:

satin ribbon of any color you like (you can use 2 colors, or more if you want to make a smooth transition from one shade to another). The length and width of the ribbon depends on the size of the bow you want to create.
a circle of felt, 3-5 cm in diameter - for the base;
scissors;
hot glue and a gun for it;
lighter, soldering iron or candle;
beads, rhinestones.

Manufacturing instructions:

Lush blue bow

To make such a bow for a newborn with your own hands for discharge, you need to purchase the following materials.

You will need:

tapes of blue color width 5 cm (total 85 cm) and 2.5 cm (total 60 cm);
thin silver ribbon (total 140 cm);
scissors;
hot glue gun;
threads, needle;
base cut from felt (diameter about 4 cm);
lighter;
bead or rhinestone for the center of the flower.

Manufacturing instructions:

Based on the kanzashi techniques described above, you can create new types of bows by combining different kinds petals. By experimenting with types of ribbons that differ in texture and color, as well as adding interesting decorative elements - lace, rhinestones, beads, beads, you get the opportunity to create original compositions. By trying to make a bow for discharge from the maternity hospital with your own hands, you will not only show your creativity, but also create a talisman for your baby that will protect him.

The discharge of a child from the maternity hospital is an important day in the life of a family, so loving parents try to make this event festive. They buy it for a newborn and bring it to the maternity hospital. beautiful clothes, including an extract envelope decorated with kanzashi flowers and a beautiful bow.

You can make a bow for discharge from the maternity hospital with your own hands. There are many master classes on making spectacular bows for boys and girls. For needlewomen this is good way prepare for the birth of the baby, give him the first gift.

Discharge bow for girls

For the little princess

This product is usually made from soft fabrics. warm shades, decorated with cute prints, such as floral ones. The ribbon in a bow for a girl is often chosen pink, and bows for girls are sewn using kanzashi techniques and with an elastic band.

Discharge bow for a boy

For babies they use blue ones, blue colors fabrics with patterns in the form of stars, peas, as well as abstract patterns. Bows are often sewn for newborns from satin ribbon or fabric. The size of the bow varies, but usually they are larger for boys.

Bow for a newborn on discharge

To decorate newborns, it is better to use pastel shades, as well as light ones. bright colors. Suitable for girls:

Pink.
Lilac.
Salmon.
Soft orange.

The most common colors for boys are:

Blue.
Blue.
Green.
Turquoise.

Do not use too saturated, bright or dark colors when decorating.

Bow on envelope for discharge

Beautiful and unusual

Below are videos and photos from detailed master classes on creating several types of bows. Each master class tells how to make kanzashi flowers, bows from ribbons or with an elastic band, and fabric products.

Kanzashi bow for discharge

Japanese technology

This is a decoration made using Japanese technology. To make a lush kanzashi bow with your own hands, you need to be careful and attentive. This bow is a flower whose petals are made of ribbons. For this purpose, the tape is first cut into strips.

Satin ribbon bow

It's very fast and easy

If there is no time or opportunity to create complex decorations, a simple bow is used for newborn envelopes. A satin ribbon is a standard and stylish decoration, and many people have been able to tie bows since childhood.

The main thing is not to forget to melt the edges of the tape with a match. The length of the ribbon depends on the complexity of the bow, which can be single or double. Satin ribbon jewelry is a classic.

Fabric bow

There are many types of fabric

It is an original and stylish bow that can be tied on an envelope or decorated with a stroller. Such products are beneficial because your imagination is limited only by the variety of fabrics that you want to purchase.

This fabric decoration looks original from scraps left over after making an envelope for a newborn. This creates a stylish set for discharge.

MK bow for discharge

There are master classes that will teach you how to make different types bows and ribbons using creative elements. For example, ribbons are decorated with embroidery and rhinestones, and a fabric heart is placed in the center of the bow. It is made using fleece.

Bow with elastic band

To make the decoration easy to attach, you can sew an elastic band for it. For this purpose, an ordinary elastic band of sufficient length is covered with a satin ribbon or fabric in the color of the bow or a suitable color combination, and then stitched on both sides of the elastic. This option is convenient because the bow is simply attached to the elastic band.

They do not need to tie envelopes or a blanket, it will not be too tight or loose, tied in a hurry, because the elastic is made in advance. Such products look beautiful and neat. You can attach a large bow made of ribbons, fabric or kanzashi flowers to the elastic band.

Bow on a blanket

Convenient in the cold season

If for discharge to maternity hospital not a corner has been prepared, but Baby blanket, then it is more convenient to use decoration with an elastic band. A warm blanket is used instead of an envelope if the newborn was born in the cold season. To prevent the baby from catching a cold, he is dressed in overalls and wrapped in a blanket.

You can attach a lush bow made of ribbons or fabric to the blanket.

DIY bow for discharge: master class

A creative person can create clothes and crafts for a child’s discharge with his own hands. To do this you will need the following materials:

satin ribbon of a light shade you like, 2-3 centimeters wide and at least 4 meters long;
similar tape, but darker in tone;
rhinestones or beads of a suitable color;
lighter or candle;
lace;
strong thread and needle, or glue.

Manufacturing stages:

Cut the light ribbon into pieces 20 cm long, and the dark ribbon into elements 17 cm long. The first will be the bottom layer of the bow petals, the second will be the top layer.
Each piece is folded in half to form a petal. Then the petals are attached with thread or glue, four in a cross, and two “crosses” are folded together to form flowers of eight petals.
The resulting two flowers are superimposed on each other so that the edges of the lower light one protrude evenly from under the edges of the upper one.
A thin strip of lace is folded into a figure eight and attached to the center of the flower. You can make 2 stripes, creating a third delicate layer of petals of a multi-layer bow flower.
From the remains of the light ribbon, 6 wedge-shaped petals are folded, and the resulting flower is attached to the top of the lace. To fold such a petal, a piece of thin tape, 2 centimeters long, is folded diagonally, and then the tips are applied to each other. If desired, the petals can simply be cut out with scissors to make oval shape, melting the edges of the tape with a match.
The last stage is decorating the center of the flower with beads or rhinestones. You can decorate the petals of the first and second layers of the flower with glitter, then the bow will turn out even more elegant.

How to tie a beautiful bow for discharge

It is most convenient with an elastic band

If you buy a set for a newborn, it usually already includes a ribbon made of satin or openwork guipure. The bow is neatly tied in the middle of the envelope: the longer the ribbon, the more magnificent it will be satin bow eventually.

If you have a ready-made kanzashi bow or one sewn from fabric, then it is better to use a pre-prepared elastic band.

DIY ribbon for newborn baby envelope

Using ribbon from a bow

A 2 meter long satin ribbon, which remains after making the bow, can be used to decorate the envelope. If the bow is two-color, then two bows of the second color are attached to the edges of the ribbon, after which the product is decorated with beads, rhinestones and seed beads.

The best fakes for discharge

Ways to surprise and delight

Create beautiful crafts for newborns - this is a great way to congratulate a young mother and baby on their discharge from the hospital:

Making cakes from diapers for newborns is an opportunity to make a useful and beautiful gift, which will please the eye and will be useful in the future. Such cakes are created in the Country of Craftsmen from rolled up diapers and decorated with little things necessary for the baby: booties, toys.
To make discharge from the maternity hospital creative and fun, relatives prepare funny posters and inscriptions with which they welcome mother and baby.
If mother and baby are picked up in their own car, the car is decorated. There are special stickers that decorate the hood of a car, as well as ribbons and bows, and balloons.

You might be interested in these articles:

I sewed a discharge envelope and a bow for my daughter. I want to say right away that I don’t like nylon, lace and ruffles, so I wanted something more strict and elegant))
In this photo the colors are a little off, but overall it turned out elegant.

Here's all that was needed (for the envelope and for the bow): main fabric - 1 m, inner fabric for the envelope and for the bow - 1.5 m, calico (to match the color of the inner fabric) - 0.5 m, bias tape - 1 m , padding polyester - 1 m, detachable zipper - 50-55 cm, one-piece zipper - 20-25 cm, threads.

I won’t tell you about the envelope, there are a lot of master classes on the Internet, I used this one: the link has been removed in accordance with the site’s User Agreement, clause 2.4. - in my opinion, everything is very detailed and clear, thanks to the author.
But I came up with a bow myself, I’m sharing my experience)) I cut it out of the inner fabric and calico into a rectangle, the dimensions are optional, for me it’s about 40X100 cm. I put them together with the front side inward and bend them in half so that the calico is on top and the main fabric bantha - inside. I pin and sew along the long side.

Then, I lay out the resulting “sleeve” so that the seam is in the middle, and sew along the narrow side.

This is what should happen. This is a blank for the main part of the bow.

Now we are preparing the “ends” of the bow that will hang down. To do this, cut out a rectangle from the main fabric of the bow, the dimensions are also at your discretion, mine is about 20x50 cm. Fold it in half, facing inward. We pin it with pins so that we end up with a trapezoid: the ends will be beveled at an angle of 45 degrees. The long side of the trapezoid will be without a seam.

I left the unsewn place to turn our part in the center, because... in the end it will be the most inconspicuous place. Therefore, we start from one of the corners and stitch just short of reaching the middle of the short side (the center is marked with a pin).

Then we leave an unsewn piece and sew further, stepping back slightly from the center to the second beveled end. We turn the workpiece inside out and sew the unstitched area with a hidden seam. The blank for the hanging ends of the bow is ready.

I decided that the bow would not be tied, but placed on the envelope for wide elastic band. Let's make a case for it. To do this, take a rectangle approximately 20x150 (the longer it is, the more beautiful it will look in the end). Fold it in half, face inward, stitch along the long side, and turn it inside out. I took an elastic band 5 cm wide and determined the length by eye, so that the envelope would be tightened with it. We also cut off a piece about 25-30 cm long from this “sleeve”; it will be useful to us for decorating the middle of the bow.

Thread an elastic band and this is what you get.

I wanted the envelope and the bow to be a single whole, a set, so to decorate the middle I also took the main fabric of the envelope. Cut out a rectangle, mine is about 15x20. Fold in half, face out.

Then fold it again like this, bending no more than a centimeter on one side, and on the other you get a side with a fold. We pin, we sew. It is important to remember that these seams will be facial stitches.

Then on the other side we lay the second same line.

And with the third seam in the middle we sew two blanks for the middle of the bow.

Let's return to the main part of the bow. Place it face down and fold the edges inward, overlapping. The size of the resulting part is optional, it is better to apply it to the envelope more often to see what happens. If you have decided on the size, we process the unsewn edges and sew them into a ring. The overlap will give the bow volume in the middle, as will the calico inserted inside.