How to properly fold a men's shirt in a suitcase. How to fold a shirt so it doesn't wrinkle - the best ways

How to fold a shirt without wrinkles? Freshly ironed, clean clothes look immaculate and brand new. A neat appearance will say a lot about a person, leave a pleasant impression, and attract attention. Wrinkled shirts, T-shirts and dresses will not say anything good about their owner. Appearance is always important, especially before an important event, a long-awaited meeting or a first date. But what to do if you couldn’t iron the item right before the rendezvous, and besides, you had to go to another city, and the shirt was lying in your suitcase for a couple of days? This is where the skill of folding shirts neatly so they don't get wrinkled comes in handy.

Saving useful closet and dressing space is an important point in the rational distribution of space and time. Properly folded, ironed laundry will never become wrinkled.

Even stacks look neat, save space, and allow you to see all the laundry on the shelf.

How to fold a shirt correctly? To put an item in a closet for long-term storage, you must first prepare it. Some housewives prefer to fold their clothes after washing and keep them in the closet until they need to wear them. Then the iron is taken out and the item is ironed. Allegedly, while it is lying in the closet, it will be wrinkled a hundred times. But this is not entirely rational.

The fact is that immediately after washing, when the fabric is still soft and not overdried, ironing it is easier and more effective. It is more difficult to iron a lying item.

The trick is in the method of storage and preparation:

iron - set the iron to the temperature setting indicated on the label. The shirt is ironed from smallest to largest: first the collar, then the sleeves, then the front and finally the back;
let it hang - the warm product will immediately wrinkle, so it must cool down. To do this, you need to hang the shirt on hangers, fasten it on the top button, and leave it for 20–30 minutes;
spread out - spread the buttoned-up product on a clean floor, table or bed. The back should be on top, all folds and irregularities should be straightened.

How to fold a shirt correctly?

So, for men's shirts with long sleeves there are two ways:

Dividing the area of the product into 3 parts lengthwise, fold the left third onto the back. Place the sleeve with the cuff unbuttoned parallel to the side seam. Do the same steps on the other side. On the resulting rectangle from below, measure approximately the length of the palm and bend it. We fold what is left in half.
Almost everything is the same here, only the sleeves fold differently. One is folded in three, and the other is stretched exactly diagonally and folded in half so that the cuff lies at the collar.

With T-shirts everything is much simpler because you don’t have to roll up the long sleeves.

You can fold a T-shirt or polo shirt lengthwise, dividing it into two equal halves, fold the sleeves inward, and then in half or into thirds. There is a slightly different way: first tuck the sleeves to the center, and then fold them in half lengthwise and then crosswise in half or twice.

How to quickly fold a shirt? The most efficient measure is this method, invented by the Japanese. It is necessary to visually outline a line parallel to the side, stepping back slightly from the edge. Then mentally divide the shirt crosswise into equal halves. The point where these lines intersect will be one of the capture points. So, with our left hand we take hold of it, and with our right hand we take hold of the shoulder where the first line began. We lift the shirt horizontally, grab it right hand edge, place the product, slightly bending the opposite edge. All that remains is to bend the resulting stack in half. With practice, you can learn to fold shirts this way in a couple of seconds.

How to fold shirts correctly when going on a trip? There is not much space in the suitcase, so you need to try to pack your things compactly.

Try to pay attention to the material from which this or that item is made. The point is not necessarily its density; both thin and thick fabric can wrinkle.

How to fold a shirt in a suitcase without it getting wrinkled:

Some shirts will be more convenient and practical to simply roll into a compact tube. This method is suitable for polo shirts and thin shirts made of delicate fabric. As a result, they will not look wrinkled and will fit in any free corner.
The hard collars of many shirts can become deformed during static storage or transportation. To prevent this from happening, it is better to fold them with opposite edges to each other, in other words, “jack”.
Hard plastic holders were also invented to fix the shape of the collar. They are ideal for packing shirts in a suitcase. In the absence of this accessory, thin socks and a scarf rolled into a tube are placed under the collar.
IN good stores Shirts are sold folded on a cardboard rectangle. This way the item has a presentable appearance and retains its shape for a long time. When assembling your suitcase, you should use this method. In the absence of factory-made cardboard, you can make one yourself.
To prevent things from fading or getting dirty, it is better to wrap them in wrapping paper or put them in separate pockets of the bag.

The technology of properly packing shirts in a suitcase will save time both when packing and unpacking luggage. It’s so nice when everything is put in its place and does not require additional washing, ironing, darning, etc.

Employees of large enterprises and business people who are constantly traveling on business trips prefer to look impeccable. It’s understandable: neat appearance– this is already half the success.

And there is not always time for ironing and other manipulations with clothes; besides, in a hotel or in a rented apartment, an iron is often in short supply for guests.

Therefore, it will be useful to take note of a few everyday tricks, thanks to which you can learn to keep things in perfect condition after trips:

If clothes wrinkle easily, it is better to put them in a suitcase with hard sides. This way there is a greater chance that the item will remain level.
If upon arrival you find that your shirt is all in folds, just dial hot bath and hang it above her on a coat hanger. The steam will smooth everything out very quickly.
Thin, easily wrinkled items made of delicate fabric will certainly become wrinkled during transportation if you put them at the very bottom of the bag. A men's shirt should be carefully folded and placed on top of all other clothing.
Any shoes, hair dryer, filled containers, jars, cosmetic bags, books and other heavy things are best placed at the very bottom of the suitcase. This way there is less risk of its load crushing something or wrinkling your clothes.
There is an invention for frequently traveling business people who constantly attend important meetings and wear suits. It's called a portmanteau. This is a special bag with hangers and a separate large pocket for hanging a shirt or an entire suit in an unfolded form, as they usually hang in the closet. This compartment folds in half, thus covering the entire bag. As a result, everything is beautiful and unnoticeable, and clothes for an important and responsible event look brand new, as if they had just been ironed.

To fold quickly and neatly men's shirt, you need to practice several times. This useful and simple skill will greatly simplify the life of travelers and housewives, especially those who do not like to iron clothes.

A shirt is an item of clothing that is among the wardrobe items of both men, women, and children. However, not all housewives know how to put it in luggage or after washing. How to fold a shirt so that it doesn't wrinkle? Read about the algorithms and features of storing and transporting shirts in the article.

The item of clothing will look carefully ironed even after storage, if you take into account the nuances of folding.

Salespeople in clothing stores and dry cleaners fold items so that they remain presentable despite long-term storage. Every housewife can learn this. However, before moving on to step-by-step algorithms, learn the features and tricks to keep your shirt looking great.

Do not start folding shirts immediately after ironing. Heated material contains moisture particles, so clothes are prone to wrinkles, which are then difficult to iron without a trace. Wait until the fabric has cooled before folding.
Cardboard will provide additional protection against wrinkles. Have you noticed that in stores shirts are folded using a thick insert? This is done to keep the item presentable and smooth. Of course, no one stores the original cardboard, but you can cut a new one to fit the size of the product.
Folding shirts into travel bag, wrap them in thin paper. It will protect the material from both dirt and wrinkles.

For those who often move from place to place, it is more advisable to purchase a special spacious travel bag designed for transporting suits, shirts and other things that are difficult to iron.
Do not weigh down folded shirts on closet shelves with other items that are heavier in weight. This way you will avoid the formation of wrinkles, and the shirts will maintain an aesthetically attractive appearance.
If, despite proper folding and storage, the shirt is still wrinkled, you can get rid of the wrinkles without ironing. Turn it on in the bathroom hot water and wait for steam to form in the room. Hang the shirt there on hangers and leave for 20-30 minutes. Wrinkles and wrinkled areas will smooth out on their own.
When folding shirts, follow the seam lines and try to keep them parallel. Tapering, designer inserts, unusual style - everything needs to be taken into account so that the item does not become “skewed”.

Taking into account the above nuances, you will fold things so that you don’t have to smooth them out later. We study algorithms.

How to fold a shirt: step-by-step instructions

Start folding things only after they have cooled down from the iron!

No specialized skills or abilities are required to fold a shirt. Two or three workouts - and this process will not cause you any difficulties.

Method No. 1 – for the closet and on the road

Folding algorithm:

Prepare a level place. Cover it with clean material to avoid accidental dirt or any minor unevenness. Button up the shirt and turn it face down. Smooth out the material with your hands.
From the left edge, grab the shirt at the mid-shoulder point. With your other hand, grab the bottom of the shirt along the same line with a point on the shoulder. A stripe is formed. Fold the clothing along it so that the sleeve and the third part of the item are on the back area.
To avoid wrinkles in the fabric, move the diagonally folded sleeve slightly to the side to create a straight line, parallel to the shirt.
Bend the other side of the item in the same way. Make sure that no wrinkles or folds form. Fold the sleeve over, grasping the middle of the shoulder. The result should be two sleeves lying parallel on the back area.
Fold the bottom edge of the shirt to approximately halfway. After this, bend the upper part towards the back area. The main part of the shirt is folded into three.

Ready! Now the shirt will not get wrinkled in the closet or luggage for a trip. Items folded using this method are laid face to face (the bottom of the top to the collar of the bottom).

Method No. 2 – for the closet and luggage

Folding algorithm:

Button up your shirt. Place face down on a flat surface and smooth out folds and wrinkles with your hands.
We start collecting from the side. The part bends towards the center of the shirt and straightens out from unevenness. The sleeve of the folded part is bent three times. Make sure the cuff remains smooth.
We fold the second half of the product in the same way. It should not be more than 2 cm on the first part. At this step, smooth the shirt so that there is not a single wrinkle or unevenness left that could later wrinkle the product.
Lay out the sleeve of the second part along the length. Fasten the cuff and pull it up to the edge of the collar.
The bottom area of the shirt folds down to the width of your palm. She covers her sleeve. Its edge should be in the fold area.

Iron the shirt first. If this is not done, unevenness and folds will remain on the fabric and you can only smooth it out after such storage through aggressive steaming.

Method No. 3 - for a suitcase

It is not always possible to fold shirts into a suitcase in a way that fits in a closet. When transporting things, they move, so there is a chance to get the product in an unpresentable form.

To prevent this from happening, roll your clothes into a neat roll. The method is not universal. It is suitable for successfully transporting items with short sleeves, as well as delicate materials. Silk, cambric and will not be damaged when rolled.

The folding scheme is simple:

Fasten the buttons and place the shirt face up.
Fold the sleeves back. At the same time, observe the seams and parallels so as not to distort the shape of the shirt if stored incorrectly.
Wrap the shirt loosely. Leave the collar loose - rolling it up will deform it.
Place the shirt in your suitcase with the collar down.

Place shirts in the travel bag so that they are on top. Don't weigh them down with other things. This will lead to deformation, creases and folds that will not be easy to iron out. Place the folded shirts in a single row on the surface of the suitcase.

Fashion is constantly changing, new styles, styles, and models appear every day. Each occasion in life is assigned a separate outfit, image. The shirt has taken a reliable place in the wardrobe of men and women, as it fits into a business, casual, formal style.

Designers have developed hundreds of model options, but accuracy is considered an indisputable requirement for the product. An ironed shirt pairs beautifully with jeans, trousers, and skirts. We invite you to familiarize yourself with proven ways to preserve the ironed look of your item.

Video training “How to fold a shirt without wrinkles”

Ironing is a labor-intensive process; the work takes a lot of time, effort, and patience. To prevent the product from becoming wrinkled, it should be folded correctly. When organizing the storage of shirts, you will need an iron, cardboard, hanger, and wrapping paper. If you plan to fold more than one shirt, iron the items and only then stack them one by one:

Iron the shirt and hang it on a hanger to cool.
Fasten the buttons and lay the product on a flat surface.
Fold one side over the shoulder area and straighten the sleeves of the shirt. Use the same method to fold the other side. As a result, both sleeves will be parallel to the side fold. The shape resembles a rectangle with straight sides.
Holding the bottom edge, fold the product in half the required number of times. In this position, shirts are stored in a closet or transported in a suitcase.

Experienced housewives are amazed at the dexterity with which a man's shirt is folded in stores in 2 seconds: smoothly, evenly, neatly. To achieve this effect, a cardboard sheet of paper is used as a fixative. It is placed on the back in the neck area, and then quickly fold the product on its basis, according to the recommendations.

Each shirt is placed separately in the suitcase, each one is wrapped in wrapping paper. This tip will help maintain the shape of the product and protect the item from possible contamination.

Folding a shirt is not difficult if you study video and photo stories on the Internet. If you learn how to fold things correctly, it will take much less time to pack and iron at the wrong time. Hangers have been considered the simplest and most popular way among people to store shirts since the Soviet period.

For more information on how to fold a shirt so that it doesn't wrinkle, watch the video.

Carefully fold men's shirts is subject not only to salespeople and dry cleaning workers. If you wish, you can learn this art by watching instructions, photos and videos. Let's imagine that we washed the shirt, dried it and ironed it. Now it needs to be carefully folded for storage or stowing in luggage. Process folding a shirt with a skillful approach it does not take much time.

Tips to make folding a long sleeve shirt easier:

It's easier to learn how to fold a shirt with long sleeve those who were good with geometry at school - in this case you will need the ability to visually divide an object into parts, as well as align the edges along a line.

Let's get started

Initial position: The shirt is turned right side out, all buttons are fastened. The shirt is placed back up on a flat surface: a table, a bed or a clean floor. We smooth the product with our hands so that there are no folds or creases.

1. Start folding the shirt from the left edge. We grab the middle of the shoulder with the fingers of one hand. Mentally draw a straight line down, and at this point we grab with the other hand. This way we separated about 1/3 of the shirt. We bend this part to the back.

2. It turned out that the sleeve lies diagonally. If we leave it like this, it will become very wrinkled. Therefore, the next step is to bend the sleeve parallel to the sidewall.

3. We do the same with the other side. Now both sleeves lie snugly next to each other.

4. On this moment the shirt is a rectangle. We have to fold it in three. We fold the lower part of the shirt, about the width of a palm, over the back. Fold the rectangle in half again up to the collar.

5. Done! Turn the shirt over and place it in the closet with the placket facing up.

Another way to fold a men's long-sleeve shirt:

1. Lay out the shirt face down, that is, back up.

2. Mentally divide the shirt lengthwise into three parts. We take one third of the part and bend it back to the middle of the shoulder.

3. Then take the sleeve and fold it into three folds. At the same time, we leave the cuff open so that later, when you put on the shirt, it will be perfectly smooth.

4. By analogy, we fold the other side to the middle of the shoulder, but now we lay out the sleeve in parallel, and raise the cuff up to the collar.

5. Fold the bottom of the shirt, which is usually tucked into trousers, to the width of your palm, then fold it again, raising the bottom of the shirt to the collar.

Now the shirt is ready to be transported to the suitcase. And if a man is going to business meeting, you can simply take out a perfectly ironed and folded shirt and put it on. The dress code will be passed! To make it clearer, please watch the video instructions.

Video on how to fold men's long sleeve shirts:

Video on how to pack a men's shirt in a suitcase

A simple and neat way to pack a men's shirt or women's blouse in luggage using a glossy magazine or cardboard:

Shirts transported in suitcases often develop wrinkles. You can prevent this nuisance if you put it in your bag correctly. There are proven ways to quickly and neatly fold men's shirts so that they retain their freshly pressed appearance and look as beautiful as they do in a store window. Simple and available options Anyone can easily learn how to fold shirts.

Clothes are placed in a bag with a rigid frame so that they do not get wrinkled on the road, and shirts and blouses made of delicate fabrics must be placed on top. Things in a suitcase should fit tightly to each other so that they do not move when moving.

Before you put your shirt in your suitcase, you need to fasten all the buttons on it and put it in the special packaging in which it is sold in the store. If the box was thrown away, you need to cut the cardboard to size and secure the shirt on both sides. Items made from delicate fabrics must be additionally packed in clean paper bags.

How to fold a long sleeve shirt

Store clerks fold men's shirts in these ways, but they can be used by anyone who wants to prevent wrinkles from forming on his clothes. They can also be used when you need to beautifully wrap a shirt as a gift.

You need to fold things on a clean, flat surface on which you need to lay a cloth. Before using one of the methods, you should fasten all the buttons on the shirt, excluding the cuff buttons.

Place the shirt face down and fold the bottom up to the shoulder.
Fold the right sleeve to the left, then fold it in thirds so that the cuff is on top.
Fold the left one to the right at the shoulder, then fold it in three so that it is parallel to the other, and pull the cuff towards the collar.
After this, fold the bottom edge to the collar and turn the shirt face up.

Before packing shirts in a suitcase, it is advisable to iron them. After this, things should be allowed to cool for 20–30 minutes. If you fold clothes while they are still hot, wrinkles will form on them.

Turn the shirt face down.
With one hand, hold the contact point between the left sleeve and collar. The other is to align the bottom edge so that a straight line is formed, running from the collar down. You need to bend the left sleeve along this contour.
Fold the right side the same way.
Then raise the bottom edge to the center, and then to the collar.
Then turn the item face up.

The third method is used for polo shirts and products made from synthetic fabrics. Things folded in this way can be placed in a backpack, but they need to be secured on all sides so that they do not move.

First, fold the shirt as in the second method - from the first to the third points.
Then roll up the bottom part up to the collar. At the same time, you cannot roll it tightly, otherwise folds will form.
Place the shirt face up in the suitcase and secure it.

How to pack short sleeve shirts

Great for shirts with short sleeve the following way:

place it face down;
divide into 3 parts vertically and bend the left side in a straight line;
roll up the sleeve 2 times;
do the same with the right side;
fold the bottom to the sleeves;
fold the item in half so that the bottom part connects to the collar.

Another method is suitable for polo shirts and T-shirts:

place the product face down;
grab the middle of your right shoulder with one hand and the lower part with the other;
bend the right side so that the bend is parallel to the side seam;
do the same with the left side: you will get a rectangle, and the sleeves will be located one above the other;
take the bottom edge and bring it to your shoulders, and then turn the item face up.

How to quickly fold a shirt

It takes time to properly pack a shirt into a suitcase, but there is a way that helps you fold things in a short time so that they don’t get wrinkled in your bag. It was invented in Japan, and it consists of the following:

Lay the shirt face up.
Draw two imaginary lines. One runs parallel to the side seam from the right shoulder down, the second in the middle of the shirt perpendicular to the first.
Take the intersection of these lines with your left hand, and your right shoulder with the other and point it down.
When crossing the point of contact of two lines, intercept it with your right hand.
With a sharp movement, straighten both arms and, lifting the shirt from the table, shake it.
The sleeve should hang down. Then lower the item to the surface so that it lies on the table first, and then the rest of the shirt.

To prevent shirts from getting wrinkled in a suitcase, they must be folded correctly. There are proven methods used by sellers that prevent wrinkles from forming on clothes.

If a person needs to constantly be on the move, then it is worth purchasing a backpack - a special bag for transporting shirts. It allows you to guarantee the transport of men's shirts without wrinkles forming.