DIY snake pillow. DIY soft toy snake

Even children over 8 years old can sew such a snake under the guidance of adults.

After all, in order to have a furry animal at home, it is not at all necessary to buy it at a pet store. You can acquire a devoted friend, touching and a little, and perhaps cheerful and cocky, by sewing it with your own hands using our instructions and directions.

Before starting work, carefully read these instructions and operating rules!

To sew a toy you need:

♦ fleece (red, pink, green, yellow, red, white);

♦ beady eyes;

♦ synthetic filler;

♦ needle;

♦ threads (No. 40-45);

♦ scissors.

Useful information for adults

In children, handicrafts develop imagination, spatial and figurative thinking. Improves the ability to work with sewing accessories, teaches the child the simplest cutting operations, strengthens the skills of making basic types of seams. Making a soft toy instills interest in needlework and encourages active use of acquired hand sewing skills in everyday practice.

The child must sew the toy under your supervision.

OPERATING RULES

♦ for sewing you need a comfortable workplace, which always needs to be kept in order;

♦ the needle should be stored in a needle bed, scissors - in the work box;

♦ the needle must not be put in the mouth or injected into clothing;

♦ you need to put the scissors on the table with the blades closed away from you;

♦ in order not to get confused, you should cut out the parts sequentially, as you work, and not all at once;

♦ during operation, you must refer to the diagram that shows the procedure.

Making a soft toy Snake. Master Class

In order for the toy to look neat and the seams to be even and not “creeping”, we first sweep away all the details (Fig. 1), then sew them together using a needle stitch (Fig. 2); sometimes we will use a hidden seam (Fig. 3).

1. From felt you need to cut out the following parts (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11).

1, 4 - Torso, yellow rectangle

2, 5 - Torso, red rectangle

3 - Torso, green rectangle

6 - Tip of the tail

7 - Lower jaw

8 - Mouth, inner part

9 - Upper jaw

10 - Tongue

2. Sew the colored rectangles (parts 1,2,3,4,5), applying the long side to each other. Color order: yellow, red, green, yellow, red.

Sew the tip of the tail (6) to the red part of the body.

3. Fold the resulting part in half lengthwise and sew it together. Do not sew up part 4 - we will fill the toy with filler through this hole.

4. Turn it inside out and stuff it loosely. We sew up the hole (part 4) with a hidden seam (Fig. 3).

5. Making the lower part of the head. We fold parts 7 and 8 with the right sides inward, sew them together, turn them inside out and stuff them loosely with filler.

6. Making the upper part of the head. We sew together parts 9, unfold them, fold them with part 8 right side inward, sew them together, turn them inside out and stuff them with filler.

7. To part 8 on the bottom of the head, baste the tongue (10).

8. Place the top and bottom parts of the head together, pink sides (parts 8) inward. Sew the pink parts over the edge.

9. Sew the head to the body with a hidden seam. The body seam should be in the middle at the bottom.

10. Making eyes. We will assemble part 11 on a thread around the circumference, fill it loosely with filler and pull it together. We slightly flatten the resulting ball and sew on a bead. We do the second eye in the same way.

Sew the eyes to the head. To make it clearer how to sew on the eyes, look carefully at the photo. It is better for the eyes to be close to each other - this makes the muzzle more attractive.

The snake is ready!

There will be such a snake a great gift on New Year 2013 And beautiful element decor of your interior.

We will tell you how to sew a soft Snake toy with your own hands.

To make a Snake toy (Fig. 1), you will need 1-1.5 m of fabric, depending on the cutting method.

You will need:

- checkered fabric;

- a piece of red fabric;

- two beads;

- long knitting needle;

- cotton wool, foam rubber or padding polyester.

Cutting details

1. Main pattern about 1.2 m long - 2 parts.

2. Mouth - 2 parts.

3. Language - 1 piece.

Operating procedure

1. Transfer the pattern (Fig. 2) to the fabric and cut out the main part along the grain thread or diagonally (Fig. 3). For a diagonal cut you will need 1 m of fabric, for a straight cut - a piece of fabric measuring 33 x 150 cm.

2. Cut out the body parts using an 8mm seam allowance.

3. Sew together the parts of the body. Sew the mouth parts along the straight sides.

4. Place the front and back halves of the snake's body with the right sides facing inward and attach the mouth to them, also with the front side facing inward. Pin these parts together and then sew them together (Fig. 4).

5. Sew the body, leaving a hole in the middle for stuffing. Turn the snake right side out and stuff the tail first, then the head (don't stuff the mouth too tightly) and the middle using a long knitting needle. Carefully sew up the hole with matching threads.

6. Sew a tongue of red fabric in the depths of the mouth, then sew the edges of the mouth so that it is half open (Fig. 5).

Soft toy snake with your own hands... In anticipation of the New Year, you can make its symbol. According to Eastern beliefs, this will bring good luck in the coming year. In addition, such a hand-sewn snake will serve as a home decoration not only on holidays.

Master class on sewing a snake

To sew a soft toy snake you need the following materials:

fabric with a dense weave of threads that does not fray when cut ( the best option is a dense elastic synthetic) with a pattern imitating the pattern of snake skin;
matching threads;
synthetic winterizer, holofiber, cotton wool or other stuffing material;
two large buttons for the eyes;
a bright ribbon or a small scarf around the neck.

How to sew a soft toy SNAKE

First of all, you should decide on the size of the snake. For a body about a meter long, you need a piece of fabric measuring 50x100 cm (or two pieces measuring 50x50 cm if you plan to make the snake’s belly from a fabric of a different color). To reduce or increase the size of the torso, you need to take a larger or smaller piece of fabric, respectively.

The pattern is a hand-drawn double spiral. It is advisable to first outline the outline with a thin pencil or chalk (depending on the color of the fabric), and only after the result is considered satisfactory, draw it.

Along the finished contour, the fabric is pinned or swept away and the body of the snake is cut out.

The head pattern is done in the same way, the size of the head at the place where it is sewn to the neck is made slightly larger size body in the same place without taking into account the dart. The darts themselves are placed in such a way that when sewn, the head turns out to be convex.

There are no seam allowances.

The body is sewn with a regular stitch; if necessary, the edges of the fabric are sewn with a zigzag or using an overlocker. The sewn body is turned right side out using a pencil or a long smooth stick.

This is what the workpiece should look like:

On the head parts, darts are first sewn in, after which the upper and lower halves are sewn together.

The body and head are stuffed with filler. ATTENTION! It is advisable to fill the body gradually, in a half-turned state, evenly distributing the stuffing.

The eyes are sewn to the head, which is already filled with filler, while the filler is also partially stitched from the inside - thus, the formation of the muzzle occurs. Those places where the button eyes are located seem to be “retracted” into the head.

The finished head is sewn to the body using a hidden or semi-hidden seam, slightly gathering the fabric of the head and matching the side seams. The completed seam is closed with a tied ribbon or scarf. Alternatively, you can use beads, an imitation collar, capes or something else.

Dear readers of the online magazine " Handmade and creativity,” today we propose to make such a charming snake. This DIY snake toy is very easy to make; even a person who is not very familiar with sewing can cope with this task. After all, in order to get yourself an interesting soft animal, it is not at all necessary to buy it in a store. A touching, devoted friend, and maybe even a cocky one, can be acquired by sewing it with your own hands, using our step-by-step descriptions and photo.

Required materials and tools:

thick fabric of various colors;
batting or other filler;
buttons for eyes;
red tongue tape;
threads to match the fabric;
sewing machine;
needle.

Cutting out the parts for the toy

To sew a snake toy with your own hands, decide on the fabric: use bright, unusual fabrics, preferably dense or special soft cloth, from which toys are sewn. For the snake's belly, the fabric may be thinner. So, cut a long strip of fabric that is rounded at both ends. Also, make sure that the fabric expands at the head and gradually tapers towards the tail. Use this piece as a template for the bottom of the snake. Place it on the fabric and trace the outline, then carefully cut it out.

Sew together parts of the toy

Apply a tongue strip to the middle of the toy's head and secure the edge with needles. Make sure the tape is placed on the front side. Fold the parts of the snake and secure with tailor's needles so that the tongue is between the parts. Sew around the outer edges of the toy using a sewing machine. Leave about 10cm along one side unstitched. Through this hole we will fill our snake with filler.

Stuffing the toy

Turn it inside out and fill the body of the snake with batting or other material. Use pencils or knitting needles to fill the furthest parts. Try not to make the snake too tight, otherwise the seams may come apart over time. Sew the hole by hand or with hand stitch on a sewing machine.

Decorating the face

Then sew buttons to the middle of the head. These will be the eyes of the snake. Choose buttons in bright and unusual colors, but they should be combined with the main one. color scheme toys. Also for this purpose you can use black beads, shiny rhinestones or cut circles from felt and sew them on. Cut the snake's tongue into a V shape and use a lighter to melt the edges of the ribbon to prevent them from unraveling. This is how we made a wonderful DIY snake toy; it can also be used as a sofa cushion.

If you have time to sew toys, but have very little experience in this matter, use our step-by-step master class, which tells you how to quickly sew a toy snake with your own hands. This toy will be a great gift for children and adults!! And most importantly, sewing a soft toy snake is easy and simple! By the way, you can also easily and simply knit any toy or

Whether you are a master or a beginner, it is very easy to create a similar pattern for private use! To keep the head and upper body of the snake vertical, when stuffing, you need to insert a thick bendable wire.

The size of the snake from our master class is 20 cm, it is sewn from fleece and cotton, stuffed with padding polyester, but beginners can use any other available material.

So, how to sew a toy snake at home? Let's look at the step-by-step instructions.

Pattern for sewing a snake with your own hands step by step

We draw the snake pattern ourselves or use ours.

Well, where the body is is immediately clear, but the part next to it is part of the head, you need 4 of these parts.

Place one piece of fabric on top of another and cut along the outlined outline.

We carry out standard procedures - sew it together, turn it inside out, fill it with padding polyester (or something else, padding polyester would be the best option). Since the body of the snake toy turns out to be quite long, we had to (which we advise you to do) make an additional hole, first stuff through it, then the rest. Another tip about filling - do this quite tightly, then the snake can be modeled in different poses, it will perfectly “hold its head.”

Attach the head to the finished product

It's the head's turn. From the piece that was in the pattern, we cut four blanks. We decided to make a two-color head, so we made two of one color and two of another. Next, we fold the same-color parts and sew them halfway, from cross to cross.

Now we connect the multi-colored parts to each other, sew them together, leaving a hole at the back of the head. We stuff the body through it after turning it inside out, then we sew it together with a hidden seam.

We put the head to the body, bait it in four places, maybe more. After this, sew tightly with a hidden seam.

We hope you enjoyed our step-by-step master class for beginners, and now, demonstrating finished toy snake, you will proudly say “I did it myself!” See you again!