Knitted sweaters with knitting patterns and descriptions. Knitted sweaters with a zipper Beautiful sweater knitted with knitting needles with a zipper

You will need:
-1100 g dark blue Bingo yarn (100% merino wool, 80 m/50 g),
- knitting needles No. 4 and No. 5, circular knitting needles No. 4,
-transparent two-way zipper 65 cm long.
Facial surface: faces. R. - persons p., out. R. -outside P.
Purl stitch: knit. R. - purl p., out. R. -persons P.

Elastic band: alternately purl 2, knit 3. Pattern for planks: alternately knit, 6 purl. Stripe with braids: knit according to the pattern, which shows only faces. r., in purl. R. knit loops according to the pattern. Perform 1 time from the 1st to the 16th row, then repeat from the 5th to the 16th row. Neckline: Knit 1 stitches from the front half of the stitches. crossed, knit 3 p. persons stitch and stitches aside. From the back half of the loops, knit 1 each. cross. and tie the bar in the same way. In the next row, knit 1 st from each knitting needle together. Zipper strips: for the outer strip, cast on the front half of the transverse edge loops from 4 p. 3 p. each, knit 2 r. persons stitch and close the loops. For the inner placket, cast on stitches on the other half of the stitches and knit in the same way. Sew the loops on the collar using a knitted stitch. First sew the zipper under the outer strip, then sew the inner strip on the reverse side.

Knitting density: 20 p. and 26 p. = 10 x10 cm.

Back: on knitting needles No. 4, cast on 104 sts and knit between edges. 15 cm with a pattern for the strips, evenly adding 4 sts in the last row. Then switch to needles No. 5 and knit as follows: 1 chrome, 56 sts of stripes with braids, 16 sts of pattern 2, 28 sts of stripes with braids, 4 p. pattern 3.2 p. purl. smooth, 1 chrome. After 31 cm from the bar, close 5 sts for the armholes on both sides and in every 2nd p. 1 x 4.1 x 3 and 2 x 1 p. After 22 cm from the beginning of the armhole, close the middle 16 p. for the neckline and finish both sides separately. To round, close from the inner edge in every 2nd r. 2 x 3 p. At the same time, to bevel the shoulder, close 13 p. from the outer edge and in the next 2 p. 1 x 13 p. After 24 cm from the beginning of the armhole, all loops should be closed.

Right shelf: on needles No. 4, cast on 50 stitches and knit between edges. 15 cm with a pattern for the planks, evenly adding 4 stitches in the last row. Then switch to knitting needles No. 5 and knit as follows: 1 edge, 2 purl stitches. satin stitch, 28 p. stripes with braids, 16 p. pattern 2.4 p. pattern 3, 2 p. purl. smooth, 1 chrome. Make an armhole and a shoulder bevel on the left side, as on the back. After 46 cm from the bar, close 5 sts for the neckline on the right side and in every 2nd p. 1 x 4.1 x 3 and 2 x 1 p. After 55 cm from the bar, all loops must be closed.

Left front: knit symmetrically. Sleeves: on needles No. 4, cast on 38 sts and knit between edges. 16 cm with a pattern for the straps, evenly adding 6 stitches in the last row. For sleeve bevels, add on both sides in every 5th row. 22 x 1 p., including added loops to the pattern. Then switch to needles No. 5 and knit as follows (60 stitches on a needle): 1 edge, 7 stitches of pattern 3 from the arrow, 28 stitches of stripes with braids, 16 stitches of pattern 2.11 stitches of pattern 3.1 chrome Next, include the added loops in pattern 3. After 28 cm from the bar, close the sleeves for edging on both sides 7 sts and in every 2nd r. 1 x 6.1 x 3, 7 x 1.1 x 3, 1 x 4 and 1 x 5 p. After 10 cm from the beginning of the sleeve roll, close the remaining loops.

Assembly: sew shoulder seams; Along the neckline, cast on 104 stitches on circular needles and knit the neckline. Then tie between the edges. 20 cm with a pattern for the planks, with every 4th r. add from the outer edge in the 1st strip of faces. p. 1 p. at a time, and close the loops. Tie the zipper strips. Sew in the sleeves, sew side seams and sleeve seams.

Pattern
Knitting pattern and symbols

The brilliant yellow color of the melange effect yarn makes this knitted jacket with zipper into a summer wardrobe item that gives you a good mood. The zipper strip here is double, so there is no need to knit additional internal strips.

Sizes: 36/38 (40/42) 44/46

You will need: printed yarn (60% cotton, 40% microfiber; 140 m/50 g) - 400 (450) 500 g yellow; knitting needles No. 4.5; 2 pairs of circular knitting needles No. 4.5; detachable yellow zipper 40 (45) 45 cm long; embroidery needle with a blunt end; yellow sewing threads.

Knitting density: stockinette stitch - 20 stitches x 30 rows = 10x10 cm.

Description of knitting jacket:

Back: Cast on 92 (100) 108 stitches on the knitting needles and knit 1 purl row with knit stitches for the placket. Then continue working in stockinette stitch, performing the edges in the form of a knotted edge, while performing the first 46 (50) 54 loops according to the sequence of colors for the right half, the last 46 (50) 54 loops for the left half. For armholes, after 34 cm = 102 rows from the bar on both sides, close 1 time 11 loops = 70 (78) 86 loops. After 51.5 cm = 154 rows (53.5 cm = 160 rows) 55.5 cm = 166 rows from the bar, simultaneously begin to make decreases for the shoulder bevels and neckline. For shoulder bevels, cast off 5 (6) 7 stitches once on both sides and cast off 3 more times with 4 (5) 6 stitches in each 2nd row. Simultaneously with the 1st shoulder decrease for the neckline, close the middle 36 loops and finish both sides separately. After 53.5 cm = 160 rows from the bar (55.5 cm = 166 rows) 57.5 cm = 172 rows from the bar, all loops will be used up.

Left shelf: With a thread, cast on 43 (47) 51 loops on the knitting needles and knit according to the sequence of colors for the right half. Make the armhole and shoulder bevel from the right edge in the same way as on the back. To cut the neckline, already after 41.5 cm = 124 rows (43.5 cm = 130 rows) 45.5 cm = 136 rows from the bar on the left edge, close 15 loops once. After 53.5 cm = 160 rows (55.5 cm = 166 rows) 57.5 cm = 172 rows from the plank, the piece will be finished.

Knit the right front in a mirror image.

Left sleeve: Using thread, cast on 40 (44) 48 stitches and for the placket, knit 1 purl row with knit stitches.
Then continue working with white thread in stockinette stitch, making the edges in the form of a knotted edge. For sleeve bevels from the bar 13 times in every 8th and 2 times in every 6th row (4 times in every 8th and 13 times in every 6th row) 15 times in every 6th row and 4 times in every 4th row, add 1 loop on both sides = knit loops from the front stitch crossed after or before the edge = 70 (78) 86 loops, after 46 cm = 138 rows (44 cm = 132 rows) 42 cm = 126 rows Close all loops from the bar.

Knit the right sleeve like the left.

Assembly: secure the threads. Shoulder seams should be made with mattress
seam For the neckline along the edge of the neckline, cast on 122 stitches on circular needles, knit 1 purl row and bind off the loops in the next row, while in the corners knit 2 stitches together with the knit stitch. Then tie a double
zipper bar.

Description of double plank knitting:
First, cast on stitches for both sides of the bar at the same time.

1.To do this, using circular knitting needles (1st pair of knitting needles), pull out 1 loop from the front side.

2. Then, on the wrong side, place the thread around a circular knitting needle (2nd pair of knitting needles).

3. On the front side, using a circular needle from the 1st pair, pull out 1 loop again.

4. Repeat steps 2 and 3 until the desired number of stitches is cast on the circular needles of the 1st and 2nd pairs. In this model, there should be 88 (92) 96 loops on one knitting needle.

5. Knit the loops of the front needles in the desired pattern. In this case, knit 1 purl row with purl stitches and 2 rows with stockinette stitch, then bind off all stitches.

6. Then knit in the same way on all stitches of the 2nd pair of knitting needles (= wrong side placket).

7. Carefully sew a zipper between the two sides of the double strip so that there is no displacement of the shelves at the top when fastening.

Sew in the sleeves. Use a mattress stitch to sew the side seams and sleeve seams.

It's time to warm up, but before you buy another blouse, you need to find out what will be fashionable this season. Among the numerous styles of various sweaters, cardigans, jumpers, a knitted sweater with a zipper stands out - a stylish and comfortable option for every day.

Women's jacket with a zipper - features of the model

This style has many advantages:

• practicality is an undeniable plus of a knitted sweater with a zipper - it has excellent heat-saving qualities, in addition, it hides figure flaws;
• originality - knitted items always look impressive, especially if they are handmade;
• convenience - the zipper quickly unfastens and fastens, the presence of a hood on the model adds advantages - in such a blouse you will be comfortable in any weather;
• versatility - a warm women's jacket with a zipper can be combined with different clothes and is suitable for girls and women of absolutely any age.

The model also has some nuances that you need to know about, for example, a knitted jacket with a zipper, especially with a hood, is not suitable for a business style. But it will come in handy if you are going for a picnic, a walk, a country trip, a movie theater, shopping, or just a friendly or family promenade around the city.

How to choose a sweater with a hood with a zipper?

Of course, there are no supernatural rules for choosing such a sweater. You should focus on your own taste preferences, but it is also important to take into account fashion trends:

1. Stylists recommend focusing on sweaters in subdued colors - autumn is not the time for flashy shades. Women's sweatshirts with a hood with a zipper in white, milky, beige, burgundy, terracotta, pistachio, and dark blue will look good and stylish.
2. It is advisable to give preference to a natural knitted sweater with a zipper. It is necessary that the composition contains about 50-60% wool. Some models are equipped with a fleece lining. This product will delight and warm you in autumn and winter.
3. Current models of knitted sweaters in designer collections are characterized by minimalism. It is best to purchase a product of simple knitting - a classic braid, English or the most ordinary stocking stitch will look light and gentle. Geometric patterns that are not too voluminous are also favorites.
4. A spectacular look can be created using a sweater with ethnic motifs, striped or checkered.

We must not forget about the features of the figure. For plump girls, it is better to buy an elongated straight model; for slender fashionistas, short zip-up blouses are suitable.

What to wear with a knitted sweater with a zipper?

Fans of accessories will have to change their tastes a little - jewelry does not go well with such a jacket. But a wonderful addition to the product can be a fashionable fur trim, and the fur can be either natural or artificial. Fur looks good not only on the collar, but also on the cuffs; it can perfectly decorate the entire length of the sleeve.

Since knitted sweaters vary in style, they can be worn with items of a wide range of styles. A model a la sweatshirt is best combined with jeans, trousers, and shorts. A more classic version is recommended to be worn with skirts and knitted dresses. An elongated knitted sweater with a zipper can be used as a coat and combined with beautiful boots.

The jacket with a zipper is knitted from 400g of wool or wool blend on knitting needles No. 3. The main types of knitting are stocking, 1x1 rib and a pattern with vertical stripes as described. To complete the work, draw a pattern and calculate the loops. When knitting a sweater, we compare the work with the pattern.

Description of the pattern for the front of the jacket.

The pattern on the knitting needles consists of vertical stripes of tangle. The number of loops is divided by 6, plus 3 additional and 2 extreme. 1st row - * 3 purl, 1 knit stitch, 1 purl loop and 1 knit stitch*.

We knit the 2nd row and all subsequent even rows like this - * 3 knit loops, 3 purl loops *. 3rd row 4 purl loops, * 1 knit stitch, 5 purl loops *, 4 purl loops. We continue knitting the 5th row starting from the 1st row.

The number of knitting loops should be divided by 2 plus 2 for the edges. Row 1: Knit all stitches. 2nd row knit * right knitting needle in a loop as for knitting

We start knitting from the back. To begin, cast on 80 stitches on the knitting needles and knit 3cm with 1x1 rib, then 28cm with stockinette stitch, adding a stitch on each side every 12cm. Having knitted 30-32 cm from the beginning, we make roundings for the armhole, fasten 3,2,1,1 loops on each side through the row. We knit straight to the shoulder bevel. To bevel the shoulder, we alternately fasten 2 times 5 and twice 6 loops across the row. There will be 22 loops left, remove them with a thread or pin.

Knitting the front of a sweater. Start from the right shelf. Cast on 41 loops and knit with a 3cm elastic band. Knit 10 loops with an elastic band for the strap under the fastener, sew a zipper to this film, knit the rest of the fabric in a pattern, adding two loops on each side every 12cm. Having reached the armhole, fasten 3,2,1,1 loops across the row. After knitting to the bottom of the neckline, remove onto the thread 5,3,2, and 4 times one loop per row and continue knitting.

Having reached the shoulder bevel, fasten 4 times with 5 loops per row. Knit the right front of the sweater symmetrically to the left.

Then we move on to knitting for the sweater. Cast on 42 loops on the knitting needles and knit an elastic band 3cm wide, continue knitting in stockinette stitch, making increases to widen the sleeves 14 times, 1 loop in every 10th row. Having reached the beginning of the rounding of the sleeve head, fasten 1 loop 3,2 and 14 times on each side, then 2,3,4 and 7 loops every other row. Finish the sleeve. Knit the second one the same way as the first one.

Steam the finished parts of the sweater and place them on the pattern. The procedure for sewing the details of a knitted sweater: sew the shoulder and side seams. Cast on the stitches of the neckline on the knitting needles, cast on stitches for them in equal parts of the front neckline from the loops of the outermost column and knit the stand-up collar to the jacket on all the loops. Knit the stand with a 1x1 elastic band and a height of 6 cm; if the stand is made with a lapel, then it is twice as wide.

Then you can. Sew a zipper into the knitted sweater to the finishing strips connected on the right and left shelves with an elastic band.