The simplest nightgown pattern. We sew a simple nightgown for beginners: everyone can do it! Nightgown pattern with straps

Figure 44 shows techniques for working with drawing tools: how to correctly draw a circle or arc and curved lines. A circle or arc is drawn with a compass, turning it by the holder in a clockwise direction (Fig. 44, a).

Curved lines connecting given points are drawn using patterns. The edge of the pattern is selected so that it connects as many points as possible (at least three), and a line is drawn along it (Fig. 44, b).

When making drawings and patterns, as well as when drawing up instruction cards, you must use the correct techniques for working with drawing tools and use the lines and signs shown in Table 25.

The clothes we wear can be divided into three types: outerwear, light clothing and underwear (color table 4).

Underwear includes outerwear (pajamas, shirtfronts, collars, cuffs) and underwear (shirts, slips, briefs, sleepwear, etc., Fig. 45). Underwear is sewn from linen fabrics (see p. 62).

The following requirements apply to finished linen:

1. Hygienic- underwear should be comfortable to wear, loose, and have few finishing details.

2. Operational- underwear must have a certain wear life. This depends on the convenience of the design, the correctly chosen processing methods and the quality of the work performed.

3. Aesthetic- linen should be beautiful in shape and finish.

Designing a nightgown

Nightgowns are very diverse in cut and finish. They can be with or without a collar, with different collar shapes, sleeveless or with sleeves of different lengths, long and short (Fig. 46).

Nightgowns should be loose in shape.

Taking measurements to create a drawing of a nightgown

To construct a drawing of a nightgown, take the measurements given in Table 26.

Details of the nightgown The nightgown consists of two parts - the back and the front. The shape and size of the parts are the same, they differ only in the shape of the goal line. At the front, the collar is cut deeper than at the back (Fig. 48).

This is explained by the structure of the human figure: most of the neck, at the base of which the collar is located, is located in the front.

Remember the words: outerwear, light clothing, outerwear, underwear, cut, measurements: half neck girth, half chest girth, shoulder girth.

Questions and tasks

1. Why are measurements taken?

2. Which of the measurements are recorded in half size, and which in full, and why?

3. By what measure is the size of the product determined?

4. What parts does a shirt consist of and what is the difference between them?

5. Look at Figure 49 and remember the names of the lines of the shirt drawing.

6. Take each other's measurements.

7. Prepare a sheet of album for constructing a drawing of a nightgown.

Practical work

Instruction card. Drawing a nightgown for size 38, height II

Tools and accessories: scale ruler, square, compass, pattern, TM and 2M pencils, eraser, album

Questions and assignment. 1. What measurements determine the width and length of a shirt? 2. Why is the increase given to the POg measure? 3. What tools are used when constructing a drawing of a shirt? 4. Make calculations and create a nightgown pattern according to the measurements taken. MODELING A NIGHTGIY You can sew products of different styles using the same pattern. When modeling, the style lines are applied to the pattern of the base of the product. Figure 46 shows models of nightgowns. They differ from each other in length, collar shape and design (use of finishes). Shirts 2, 3 and 5 are sewn using one pattern, to which changes and additions have been made. These changes are applied to the shirt base pattern when modeling it. Figure 50 shows samples for finishing shirts with vyshiyoka.

Questions and tasks

1. What is the modeling process?

2. What changes can be made to the shape of the shirt details?

3. How is a product sketch made?

4. Select the shape of the collar for the shirt you will be sewing and the trim in accordance with the chosen fabric (Fig. 51).

5. Design the style of the nightgown. An example of the work is shown in Figure 52. Draw a sketch of a shirt in your album. Make a sample of the product from colored paper (in M 1:4) in accordance with the sketch and glue it to the album.

6. Calculate the approximate amount of fabric that will be required to make a nightgown according to your measurements: 2Di+40 (for processing the bottom of the shirt and for the hem).

Preparing the pattern for cutting

Tasks

1. Cut out the shirt pattern.

2. Make a pattern for the facing of the collar of the shirt: trace the facing pattern along the pattern (you should take the pattern depending on your POSH measurements). You can draw the facing pattern yourself, as shown in Figure 53. Cut out the pattern. 3. Apply inscriptions to the pattern of the shirt parts - the names of the parts and the size of the allowances - and indicate the direction of the grain thread and the position of the shoulder line on the facing (Fig. 54).

Sewing a nightgown

For the manufacture of nightgowns, mainly cotton and linen fabrics are used: madapolam, chintz, chiffon, cotton wool, flannel, linen. These should be light-colored fabrics, plain-dyed or with small patterns (color table 5).

Practical work

When performing practical work on the manufacture of garments, it is necessary to remember about the economical use of fabric, comply with sanitary and hygienic requirements (see Appendix 4) and safety rules when working on a sewing machine, with an electric iron, scissors, needle and pins (see Appendix . 5) and technical conditions for performing manual and machine work (see Appendices 11 and 12).

Instruction card. Cutting the nightgown (see appendix 10)

Tools and accessories: work box, nightgown pattern, fabric.

Questions and assignment. 1. How to prepare fabric for cutting? 2. What should you consider when laying out pattern pieces on fabric? 3. What safety rules must be followed when cutting? 4. Calculate how much fabric is required for the nightgown.

Instruction card. Preparing cutting details for processing

Questions. 1. Why are control lines laid on the cut details? 2. Why, when making copy stitches, their loops must be at least 5 mm1 3. How to protect your finger from being pricked by a needle when sewing by hand?

Processing the gate with undercut facing

Color table 6 shows an instruction card for performing the work of processing a collar with an undercut facing.

Self-control. Check: 1) the accuracy of making and sweeping the overlock seam; 2) accuracy of stitching; 3) uniform width of the facing along the entire length; 4) quality of ironing.

Questions. 1. What machine and hand stitches did you use when finishing the collar? 2. Why do you sweep the inner edge of the facing along the line of the facing seam? 3. What safety rules must be followed when sewing on a sewing machine?

Instruction card. Finishing the bottom of the sleeve with a hem seam

Tools and accessories: working box, cutting details.

Questions. 1. What is the sequence for sewing a hem seam with a closed cut? 2. What device can be used when sewing a hem seam? 3. What hand tools did you use to finish the sleeve bottom?

Instruction card. Joining shirt parts with a double seam

Tools and accessories: working box, cutting details.

Questions. 1. What seams are used for sewing linen? 2. How is a double seam made? 3. What safety rules must be followed when working with an electric iron?

Instruction card. Finishing the bottom of a shirt with a hem seam

Tools and accessories: working box, semi-finished shirt.

Questions. 1. What manual techniques are used when making a hem seam? 2. How to iron the finished bottom of a shirt? 3. What tool is used to remove running stitches?

Instruction card. Final processing of the shirt

Tools and accessories: work box, nightgown.

Questions and assignment. 1. What temporary stitches are removed when finishing a shirt? 2. Tell us about the sequence of ironing a shirt. 3. How to check the quality of the finished shirt?

Various types of processing of shirt cuts (color, tables 7 and 8)

Processing collars and sleeve cuts

The collar of the nightgown is treated with an undercut facing made of finishing or main fabric. You can trim with lace, ribbon, piping, bindweed, frill from the main or finishing fabric, embroidery: The lower sections of the sleeves can be finished with a hem seam with a closed cut or hemming using the same finishing as when processing the collar In shirts 1 and 4 lace is inserted between the facing and the main fabric. The shirt has 2 collars with a hem facing, and the bottom of the sleeve with a hem seam with a closed cut. The lace is applied from the wrong side to the finished collar and the bottom of the sleeve. In shirt 3, from under the facings with which the sections of the shirt are processed, an edging can be released from a strip of finishing fabric cut at an angle of 45°. You can also stitch bindweed onto the facing or perform a finishing stitch on it.

Processing the bottom edge of the shirt

The bottom section of the shirt is finished with a hem seam with a closed cut and trimmed with lace, a frill of ribbon or finishing fabric. They are adjusted from the front (shirt 5) or back (shirt 6) side.

Questions and tasks for reviewing the topic “Making a nightgown”

1. What types of underwear do you know?

2. What measurements should be taken to draw a drawing of a nightgown and which of them determine the size of the collar and sleeves?

3. Name the lines of the shirt drawing.

4. What is the design process for a shirt?

5. How to prepare a pattern for cutting?

6. Tell us about the cutting sequence.

7. How to prepare the cut details of a shirt for processing?

8. How are the collars, the bottom of the sleeves and the bottom of the shirt processed?

9. What is the final processing of the shirt?

10. Fill out the table. To do this, find the correct answers and enter their numbers.

Purpose of measurements (answers)

1) to determine the sleeve width;

2) to determine the length of the shirt;

3) to determine the size of the gate;

4) to determine the width of the shirt.

On stuffy summer nights, shirts are simply irreplaceable: only in them can you sleep comfortably and soundly.

We present to your attention a women's nightgown, the pattern of which is easy to construct. Sewing a product takes several hours at most.

Patterning a shirt with straps does not require taking measurements. You can either take measurements from the finished sundress or nightgown, or simply lay one of the two on the fabric and trace along the contours.

To work you will need:

Textile. In our case, the atlas;
Bias binding;
Strips of fabric for straps;
Sewing supplies;
Nightgown pattern.

To get a wavy drapery, you need to cut the fabric at an angle of 45 to the fuller thread.

The allowances are made small, approximately 5-10 mm wide.

To ensure that the seam on the face is even, when ironing, you should first iron the seams, and then iron them in the desired direction.

The material is prepared for work using an iron with a steam humidifier. If your device does not have a steam mode, you can iron the fabric through damp gauze.

The edges of the sides are basted, ground down and overcast.

The edge of the neckline is trimmed using bias tape according to the following algorithm:

The bias binding is chipped along the outer edge of the part by 1/4 of the width;
The binding is ground down, at the same time slightly shrinking;
The outer edge is wrapped with binding and stitched without allowance.

The shirt is tried on to check the length and placement of the straps. The latter can be placed in different ways, and you can choose the method that is convenient for you:

Sew into the seam of the piping on the back.
Leave unexpired space for grinding them.
First, sew the back edges, and then sew the straps using a machine stitch.

The cut on the back and the straps are processed.

The lower part of the shirt is processed. To get wavy folds, you need to do it with a zigzag stitch.

This beautiful shirt can also act as a dress, of course, only for the eyes of the man you love, and you shouldn’t wear such an outfit beyond the bedroom. It is for such romantic evenings that this model is offered. But if you replace the elegant fabric, which can be seen in MK below, with satin or cotton, you will get an ordinary nightgown.

It’s up to you to decide what the shirt will be, but now I suggest moving on to the master class and patterns, which can be downloaded below.

How to sew a nightgown with straps: master class

Difficulty: medium. Sewing a shirt will take several hours, but for real lovers of tailoring, these minutes will be nothing but pleasure.

Necessary materials:

• 2.8 m of fabric,
• non-woven fabric (optional),
• threads of matching fabric color,
• openwork elastic band,
• linen fittings for length adjustment.

Nightgown pattern

Download and print the pattern. Glue the sheets together using the black circles as a guide. Cut the pattern to the desired size.

Sew a nightgown: master class

Transfer the pattern details onto the fabric.

We start work from the top of the product. Cut out 2 sets of cups. One set will be on the outside, the other on the inside (lining). This will add support to the bodice without making it too stiff. If you are using interlining, now is the time to put it to use.

Sew 4 cups

Sew 4 parts of the outer bodice and 4 parts of the inner one. The author of the master class did not specifically use non-woven fabric to preserve the softness of the fabric.

Stitch along the seam allowances, leaving 2-3 mm from the center of the seam on both sides. This is necessary so that the allowances lie evenly, in addition, a decorative stitch will be added to the front side.

Sew one set of cups to the skirt and carefully cut the seam allowances in half and iron them up.

Straps

Cut strips of fabric 4 cm wide and 63 - 68 cm long (depending on the chosen size). If you want more substantial straps, you can make them wider and add interlining to make them tougher.

Sew the front strap to the cups. To do this, place the clothes in front of you, right side up. Attach the strap to the corners of the cups so that the ends of the strap hang down in front.

Take the cup lining with the skirt attached, align the strap in the middle.

Sew on the lining and strap. Sew only the top part of the slip where the strap is located.

Trim the seam allowance along the inside of the top edge. Turn it over and iron it up.

Back

Sew the back pieces together using a French seam. Trim seam allowances and press to the side.

Lining

Place the top of the shirt and the skirt together, right sides together. You can use pins for this, as in the photo below, or hand basting.

The seam allowance will be on the wrong side. Press the seam up.

Fold the raw edge of the lining under and sew by hand or machine, using the gap between the top and the skirt as a guide. This seam will be barely noticeable.

Back

Fold in the top edge of the back by 1 cm. Baste the seam and set aside.

Strap on the back

After this, you can try on the dress and mark where the straps are attached at the back. In the photo, the strap is attached 12.5 cm from the central seam on the back.

You can measure the required length of the strap and sew it to the back, or use linen fittings to adjust the length, as in the photo above.

Openwork elastic band

In the next step, make sure the seam allowances on both sides are facing forward. Iron them in place and pin them. Take an openwork elastic band, measure the length, it should be 5 cm less than the circumference of the skirt. Attach the elastic to the wrong side of the skirt so that the openwork part is visible from the front side.

A nightgown is a necessary wardrobe item. The main condition is that it is comfortable, does not hinder movement and does not cause allergies. You can sew the product yourself and decorate it to your liking. To do this, you need a nightgown pattern so that the finished item fits your figure perfectly.

Selecting fabric and taking measurements

The fabric for the nightgown should be light and breathable as it is not a thick outerwear garment. In this case, you should give preference to natural silk, but if it is too expensive, then you can choose cotton, calico, guipure or satin. These fabrics are more pleasant to the body and do not cause discomfort during sleep. Therefore, they will be an ideal material for sewing a nightgown or chemise.

Nightdress

Measurements are taken with a centimeter and recorded in order to determine the size of the product. For different sizes and models you need a different number of measurements, but there are basic ones without which it is impossible to sew a shirt for a certain size of clothing. To sew a nightgown you need to know the basic list of measurements:

• POG - chest semicircle;
• Dst - length from back to waist;
• Op - shoulder coverage;
• POSH - half neck circumference;
• Di is the length of the product.

Once these measurements have been taken, you can begin constructing the pattern and the process of sewing the nightgown.

Note! The shirt should not be close to the body, so you need to add a few centimeters to the measurements and do not forget about the seams.

Taking measurements

How much fabric do you need?

Before sewing a nightgown, you need to decide on the fabric and its quantity. It depends on the measurements taken and the size of the product. This is important because a larger size will require much more fabric than a smaller size. Therefore, it is worth carefully taking measurements and, based on this, calculating the required footage of the fabric needed for sewing.

For example, if the length of the widest part of the chest or hips is 100 cm, then you need to take 2 lengths, namely 2 meters of fabric. The length of the product itself from the cervical vertebra to the bottom of the nightgown is also taken into account. So if the length is 90 cm and the width of a skein of fabric is 140 cm, then you need to ask to cut a piece of fabric 140x200 cm.

Also, after choosing a fabric, a separate piece needs to be washed to understand how much the fabric will shrink during repeated washing. This is necessary in order to understand how much the size of the future product will decrease after the first and subsequent washes. After this, you should double-check all calculations and measurements.

How to make a pattern

How to sew a shirt with your own hands? The pattern for the nightgown is made independently, taking into account the previously taken measurements and the model of the nightgown. It is important to note whether it will be fitted or loose-fitting. There are several common models of nightgowns

Pattern

Model with straps according to an individual pattern

The peculiarity of this model is the presence of straps for wearing the product. That is, this model is built like an elongated T-shirt. It can be of any length, it all depends on the preferences of the model. An individual shirt pattern with straps is created for each person in a separate way. After taking measurements, they are taken into account in creating the pattern. It is very important, for example, to correctly measure the length of the straps themselves so that they are not too long or short. After this, questions such as how to sew a nightie should not arise.

Straps

Full sleeve

A nightgown with such a sleeve is cut out together with the base of the shirt without additional seams to connect these parts. That is, the sleeve is not made using a separate pattern. This is a fairly simple shirt pattern. To make it, you only need to sew 2 parts together and process the edges. You can create a pattern on paper, or you can immediately draw a rough sketch of the product in chalk directly on the fabric. Thus, for this you will only need scissors, fabric, measurements taken for cutting and sewing the product, thread and pins.

One-piece sleeve

Nightgown pattern with straps

The pattern is made based on the measurements taken:

1. You need to measure the length of the product, the circumference of the hips and chest. These measurements are needed to ensure that the shirt fits well and does not restrict movement during sleep.
2. The front and back of the shirt are cut out, which are then sewn together.
3. If necessary, darts are made at chest level. If the shirt has straps, then they are cut out separately and then sewn to the base of the nightgown. This is done quickly and easily.
4. At the very end, the edge of the product, neckline and armhole are processed.

On the yoke

This shirt is sewn on the basis of a yoke. The yoke is the upper part of the shirt that rests on the model’s shoulders. The product usually begins with a yoke, and ends with stitching and attaching decorative elements and fastening buttons if necessary. The yoke pattern is made as follows: approximately 13 cm is laid along the middle of the back and along the shoulder cut line. This is the width of the yoke. And the line of the lower cut of the yoke is drawn parallel to the sprout, which starts from the neck. Thus, having finished with the yoke, all other parts are cut out according to the usual pattern. How to make a standard nightgown pattern should be seen above.

Nightie with yoke

With lace

For this model, a specific material is used for sewing and framed with lace. Batiste is quite pleasant to the body, and nightgowns of any type can be easily sewn from it. Easy to cut, lawn is different from most regular mid-priced cotton fabrics. This material is highly valued for its quality, and things made from it are good for long-term wear. Ribbons and lace borders around the edges of the shirt are used for decoration. This allows you to give the product a luxurious, finished look and a special design and color scheme. Thus, such nightgowns, made from cambric using lace ribbons, are in mass demand.

Batiste

For girls

For girls, nightgowns are made in small sizes. Sizes are usually not named by letters, they are indicated by the age of the child, for example, 10-12 years. They differ from adults in the simplicity of their cut, that is, without deep necklines and soft pink shades. Children's shirts are immediately visible, they have children's drawings on the front or color prints throughout the product.

If you want to sew a shirt for your child yourself, you can use a regular women’s pattern. If there are patterns for nightgowns, but the size is large, you can simply reduce it by removing the required number of centimeters from each edge.

Simple model with adjustable straps

This nightgown is made like an ordinary long T-shirt, to which straps are sewn separately with the possibility of adjustment, just like on women's underwear, namely bras. Shirts with straps were discussed above in the paragraph dedicated to this.

Sleeve

Technology

You need to prepare all the necessary things to create a high-quality pattern, so that you don’t have to redo it several times due to gross mistakes. To do this, you will definitely need the following products and materials:

• fabric for sewing (this can be silk, knitwear, cotton, chintz, linen or other natural materials; it is not recommended to use synthetics for underwear);
• scissors, tracing paper or pattern paper;
• chalk, sewing machine, thread of the desired color to match the fabric;
• ruler and centimeter, pins.

A lot depends on the technology of sewing a product, for example, its quality of workmanship, comfort of wearing and other important details. If the model is sewn individually, then the technology differs in its subtleties. You need to sew the shoulder seams and overcast them. Afterwards, a test fitting of the product is done, and if there are no defects, then the product is finished.

Building the back

The back neck is not as wide as the front. Therefore, for this, approximately 1 or cm is set aside. Next, a regular rectangle with an armhole for the sleeves is built. If necessary, a shoulder line is also built for further stitching of sleeves.

Connecting shoulder and side seams, sewing in sleeves

In order to sew a nightgown with long sleeves, you need to grind off the shoulder sections of the front and back and begin sewing in the sleeves gradually. Seam allowances are ironed and overcast in advance. You should start from the top point of the sleeve cap. Left and right are marked 10 cm in each direction. These should be equal sections so that the sleeve turns out smooth and not crooked. The edging is tried on to the armhole for the sleeve, if everything fits, then it is sewn in at the 10 cm marks. All this is done with one unbroken line. The bottom of the sleeves is hemmed and stitched.

Linen seam

Linen seam technology

This type of seam is made on a sewing machine. It is made for connecting seams, which are particularly strong compared to others. They were called linen for one simple reason: they are used when sewing products that are often washed. Such linen seams are used on a soldier's shirt, duvet cover, sheets and pillowcases. There are closed and double seams. They differ only in that the double seam is more accurate compared to the closed seam. It is used in sewing bed linen or home textiles.

Collar

Turn-down collar processing

The collar, cut separately from the main product, also needs to be processed. To do this, the upper part of the collar must be duplicated. And the lower collar should be slightly smaller than the upper at the ends. Both collars are pinned together. Then the stitching of both collars together begins. At the end, the collar is turned to the other side and a piping is formed. It is ironed, and we sew a machine stitch along the ends of the collar.

Ready product

All the basic details in order to sew a quality nightgown or chemise required in this process are reflected in this article. If you have any questions, there is enough information on the Internet to find answers to any question you may have.

The key to a great mood is a comfortable sleep. This concept includes both the surrounding atmosphere and cozy clothing, which allows you to feel completely relaxed and peaceful. Store-bought pajamas and shirts do not always fit perfectly into these criteria. The optimal solution is to create a night kit yourself. This way you can take into account all the nuances and preferences of a particular person. Some people are used to a nightie with long sleeves, while others need a silk thing with thin straps. A do-it-yourself nightgown with patterns for every taste will become a constant companion to dreams if you design the product correctly and select the appropriate material for it.

Difficult choice

The most popular nightgown among women. The eternal question of what a woman wants is key here, since the choice of the shape and model of the future sleep product depends on the desires of the owner.

The simplicity and innocence of the image is easily created by a long white shirt, decorated with a simple openwork border.

You can cut it out using the basic pattern of a women's nightgown.

The advantage of such a thing is its loose fit, which allows you to create a piece of clothing that does not restrict movement.

If a long white nightgown is made of cotton material, there is a possibility of making it too boring. To prevent this, it is advisable to make an accent with lace along the edges of the product.

A white shirt can be completely different. Changing cotton to silk and the corresponding pattern will allow you to create an exquisite product that will softly fit the figure and add sophistication to the image.

A winning option in this case would be a nightgown pattern with a yoke.

The main part of the product is designed on the basis of the dress pattern, where the upper part is modified. A yoke is a bodice shape with drapery at the bottom.

The product contains thin lace, which is taken into account at the stage of cutting the fabric. Based on the photo, you should assemble the bodice without touching the lace part.

Depending on preference, white fabric can be replaced with colored fabric. To make the lace part more active, it is recommended to choose a contrasting color of the lace, or spread it over the entire fabric of the yoke.

In this version, a delicate shirt will turn into a seductive item in a woman’s wardrobe.

The cold season makes its own adjustments to all the details of the wardrobe. The desire to warm up does not leave a woman even at night. A long-sleeve nightgown will work here.

To model this type of product, a pattern of an ordinary shirt according to the male type is suitable.

The set-in sleeve may contain small tucks. To give your work a feminine look, just add a thin lace trim along the edge of the cuffs. She will also decorate the bottom cut.

It is often difficult for novice craftswomen to cope with even stitching of a cut-off sleeve. In order to avoid distortions and jams, you have to look for another way out of the situation. At the same time, it is not necessary to abandon long sleeves in principle. There is a method where the sleeve is cut together with the main product.

A nightgown with a one-piece sleeve will help make working on the item easier and faster, as well as avoid additional seams. To make a nightie in this version, a basic pattern is used, in which part of the sleeve continues to the desired length.

To prevent the product from looking completely boring, you can execute it in a slightly different way. An interesting solution would be to use a pattern with raglan sleeves.

In addition to the fact that the sleeve is stitched in a non-standard way, the shirt will look brighter if you use a contrasting material for the sleeves or use a colored piping along the stitching seam.

In children's version

Since the nightgown has become an integral part of the women's wardrobe, it is not surprising that it is also sewn for girls of different ages.

Children's products are distinguished by their simplicity of cut and minimization of additional seams.

It should be taken into account that natural materials are used in the work. The shirt can be decorated by choosing bright fabric or interesting appliqués, or by embroidering it in the form of funny animals or fairy-tale characters.

The discovery is that the sleep shirt fits well into a set of clothes for boys.