How to update a leather raincoat at home. Homemade leather care products

Leather products never go out of fashion, so every home has something from the list: gloves, a jacket, a bag, boots... Periodically, leather products require cleaning at home, this will keep them in almost perfect condition for several seasons. This is especially true for products made from genuine leather, since they require much more attention: very many external factors negatively affect the material and lead things to a terrible state, while products made from artificial leather in most cases, it is enough to clean with a special cream or spray.

Approximately once a year, products made from light natural leather must be dry cleaned. Cleaning at home is an express method that will only quickly get rid of immediate problems (therefore, it is recommended to remove stains as quickly as possible). Only professionals can deal with old stains.

How to get rid of stains?

There are a lot of folk remedies against stains; in most cases, it is enough to use turpentine or gasoline for cleaning. However, they are not always a panacea, so depending on what caused the stain, there are other cleaning methods.

Grease/paint/mold. Any solvent will do the job perfectly. It is better to give preference to pure gasoline, but if you don’t have it on hand, then turpentine will do. However, they should only be used on thick skin that can withstand the impact without external changes. You can check this on the inside of the product. The stain should be wiped with a cotton swab dipped in turpentine or gasoline. Sometimes potato flour is added to gasoline in the same proportion. After the procedure, wipe the product with a dry cloth. Thin skin can be cleaned with chalk or starch, these products remove perfectly greasy spots. Regular paint can also combat oil paint stains. vegetable oil, which will easily remove paint from the product.

You can get rid of the smell of gasoline by hanging a jacket or other leather item on the balcony (any well-ventilated place will do) or using freshly squeezed lemon juice. By the way, leave the product in a ventilated place - the only way drying after any cleaning procedure.

Some people try to remove grease stains using a cloth that absorbs the grease. At the same time, dry the napkin with a hairdryer in a gentle mode. This cleaning method is not recommended, since any leather product should not be dried near heat sources or in the sun, as this will deform both natural and artificial leather.

Ink. Such traces can be removed at home using alcohol, table vinegar or a mixture of fine salt mixed with water. Apply the pulp directly to the stain, soak a cloth or cotton wool with the rest of the products and wipe the damaged area.

Blood . Most often, blood can be cleaned with a simple soap solution, carefully removing the stain, starting from the edges. Old or stubborn stains on fair skin You can try treating it with water with a dissolved aspirin tablet or hydrogen peroxide. If this doesn't help, take it to a dry cleaner.

How to make your skin shine?

In order for a leather product to retain its “marketable” appearance for as long as possible,” it is necessary to periodically clean it, adding shine. For example, a jacket needs to be polished no more than once a week, paying attention to particularly difficult areas: collar, cuffs, pockets. These places become greasy very quickly and the skin becomes dull.

The following products will help restore your skin to its original appearance:

glycerol;
ammonia;
lemon juice;
chopped onion (great for leather bags);
wax-based mixture (for 100 g of wax, 30 g of castor oil, 50 g of turpentine and 10 g of melted rosin are used);
coffee grounds (used only for dark skin, also removes perfectly bad smell new natural leather);
a mixture based on turpentine, oil and yolk (in a ratio of 6:1:1, used for cleaning varnished products);
egg white (a mixture of white and milk is suitable for fair or white skin);
Orange peel.

But when using most of the above products after the procedure, the product still needs to be treated with glycerin, petroleum jelly or castor oil. The fact is that alcohol, lemon juice and other “shine medications” remove grease, but at the same time they dry out the skin very much, and if you don’t wipe it with a moisturizer, it will quickly begin to crack and wrinkle.

What to do with scuffs?

Often, especially in jackets, abrasions appear on the elbows or shoulders. The skin in these places begins to turn white and crack, after which it slowly crumbles. There are several stages in dealing with this process that will help slow it down and return the jacket to its normal appearance.

Clean the area with regular shoe polish (colorless or leather-colored). This method is good at the first stage, when the cracks are small. After cleaning the damaged area with cream, thoroughly sand the surface with a flannel cloth. This way you will smooth out and absorb the cream as much as possible.
Use nitro paints in aerosol form. This method can be taken into account when the skin begins to crumble. The paint should be applied in a thin layer, otherwise it will only speed up the process.
Liquid skin. This remedy will help in especially serious cases, including restoring and fastening torn and cut areas.

How to keep a leather product in good condition?

In order for your jacket or handbag to please you for a long time, it is not enough just to remove stains and periodically take it to the dry cleaner. You should treat things with care. For example, jackets or other leather clothing should not be stored in plastic bags; fabric covers with a lock are more suitable for this, which will protect from dust and will not create a greenhouse effect.

The main enemy of all natural and artificial leather products is water. They should not be washed unless the manufacturer's tag states otherwise; Most often, such a tag is on gloves that are washed only by hand in soapy water, and a drop of glycerin is added when rinsing. If you get caught in the rain, you should wipe the product at home with a dry flannel cloth. Drying near heating appliances is prohibited!

There are many sprays, creams and other care products leather goods, which are usually recommended by sellers. For artificial leather products this will be quite enough, but natural leather reacts better to traditional methods cleaning, although periodic use of various, for example, water-repellent aerosols will not be superfluous.

Before cleaning a leather product in any way, you should wipe it with a damp cloth to remove dust and dirt.

You should also be careful when wearing it. Products made from genuine leather are not cheap, so you should not wear leather jacket, if you are going to do, for example, active sports. You should also avoid unnecessary contact with objects that can damage (leave scratches, abrasions or even tear) leather products.

A beautiful leather jacket is a worthy decoration for both men and women. women's wardrobe. Natural material looks noble and expensive, emphasizes the impeccable taste of its owner, and will serve faithfully for a long time. However, it is very important to properly care for these clothes so as not to cause harm to them.

To have a beautiful expensive product on long years has retained its impeccable appearance , you must adhere to a number of simple rules:

Regularly cleanse the skin of dust and impurities, turning Special attention on the sleeves.
Periodically wipe the product with soapy water using the soft side of a sponge (a flannel rag will also work). If the contamination is more serious, you can add a little ammonia to the water, it will help the skin shine like new.
To keep the skin soft for a long time, it is recommended to lubricate its pre-dried surface with castor oil or a specialized cream at least once every two months.
Any method of skin cleansing needs to be tested, so experiments should begin with an inconspicuous area. If negative consequences no, the method can be used on the entire surface.
You cannot wash the product in the usual way, as there is a high risk of stretching the leather.

This will help extend the life of an expensive product and delay the need for serious cleaning.

How to get rid of scuffs on a collar

Often on the sleeves, cuffs, folds of the collar and at the fastener you can find abrasions that are terrifying to the impressionable owner, which disfigure the appearance of the product. There are several ways to get rid of them:

After processing, the product is straightened and placed on hangers for several hours, its appearance is transformed.

Cleaning hard-to-reach pockets

Another difficult area - pockets, they are also very susceptible to contamination. They, like the collar, are cleaned with alcohol and then treated with glycerin. Experts advise doing this once every 2 weeks to ensure the product looks neat.

Ways to deal with various stains

Often the mood can be ruined by a spot accidentally placed on the skin. But fortunately, there are several ways to solve this small problem. Let's look at how to renew the leather on your jacket and get rid of even a hint of dirt. There are several ways:

If these methods do not help, you can try contacting a professional dry cleaner.

Removing Blood Stains

If blood stains appear on a light leather jacket, then you need to act immediately, otherwise they will be absorbed and it will be very difficult to remove them. You can use one of the tips below to restore things to their original glory:

The methods are simple and at the same time effective, but the main thing is to remember that you need to act quickly, preventing the stain from drying out.

Renew the appearance of the jacket, give it shine can be done using fairly simple but effective methods:

The methods are very simple and effective, but some are simply too lazy to use them.

How to update a product

Sometimes it is necessary not to clean any fragment, but to completely renew the appearance of the jacket, returning it to its original splendor . There are two great products for light and dark things.

A dark jacket will become as good as new if you apply a thick paste of natural ground coffee beans and water to it, leave for 10 minutes, and then wipe with a clean, damp flannel.
A light-colored product will shine with cleanliness if you dilute ordinary talc with water to the consistency of sour cream, apply it to the product, wait for the powder to dry and brush it with a brush.

This operation should be carried out 1-2 times a year, depending on how often the leather jacket is worn.

Over time, leather shoes lose their original color and shine, and severe stains, cracks, scratches and abrasions appear on the surface. To avoid this and increase the service life of leather products, you need to ensure proper, high-quality and timely care.

But even with proper care, there is no complete guarantee that scratches and stains will not appear on the surface, and the products will not become duller. This is due to the fact that leather is a rather capricious material that is susceptible to the negative effects of moisture, ultraviolet radiation, temperature changes and frost.

Let's look at how to properly care for leather products so that they last a long time. And we’ll find out how to restore the shine of leather shoes at home.

How to care for leather shoes

Immediately after purchase, saturate the leather surface with a special leather cream selected to match the color of the product. Due to this, the material will become softer, more flexible and comfortable. In addition, shoe polish will create a protective film from moisture, ultraviolet radiation and frost. Leave the shoes for 8-10 hours so that the product is absorbed as much as possible and provides full protection.

In the future, regularly treat the surface with shoe polish. It will protect leather shoes, boots and shoes, and can polish the surface and add shine. However, this procedure can only be carried out after cleaning the leather surface.

To clean leather shoes, wait for the dirt to dry. Then brush off any dried dirt and dust with a soft bristle brush. It is better to choose a special shoe brush for leather.

For cleaning patent leather shoes take a cloth, as the brush can scratch the delicate surface. After this, the surface of the shoes is washed with a sponge or cloth soaked in running water.

Do not wash leather shoes under running water or in a basin of water! If there is a lot of dirt and heavy stains on the boots, wipe the surface with a cloth soaked in soapy water.

To do this, add a little to the water liquid soap or grate a small piece on a coarse grater toilet soap and stir the solution until foam forms. In addition, they sell special balms, milk and even shampoos for cleaning shoes.

Wipe the surface of the products with a cloth soaked in the solution. The inside of the product can be wiped with a cotton pad soaked in alcohol. It will clean the material and get rid of unpleasant odors. After washing, wipe the items with a damp cloth to remove soap stains. Then wipe dry and set to dry.

Leather shoes should be dried in natural conditions at room temperature in a well-ventilated area. Do not place products on radiators, radiators or heating devices under any circumstances, otherwise the material will lose its shape, stretch and deteriorate.

After the shoes are dry, you need to polish the shoes until they shine with a suitable cream. Patent leather requires more delicate care. Learn more about how to clean patent leather shoes, read.

Six ways to restore the color and shine of leather shoes

A special spray or aerosol for leather products will return the original color and can add shine to the shoes. In addition, such products will effectively mask cracks and hide scratches. The paint is sprayed 20 centimeters from the surface, rubbed evenly and polished with a soft cloth;
To restore the brightness and shine of the surface of boots, shoes or shoes made of leather, it is recommended to polish clean, dry products with glycerin or petroleum jelly for several days in a row. By the way, these products can be used to dilute shoe polish if it has dried out. To make your shoe polish last longer, be sure to close the product after use;
To restore leather, you can use natural beeswax or castor oil, which is rubbed into the material using an old towel and the shoes are left to dry until the product is completely absorbed;
To add shine to the red skin, take an onion or red onion and cut it into halves. Rub a clean leather surface with the half until it becomes dirty. Then cut off the dirty layer and continue rubbing the product. After the procedure, wipe the surface with a soft cloth and leave to dry;
For brown shoes, use a coffee solution. To do this, add a small amount of finely ground coffee to water and stir. Soak a cotton swab or soft cloth in the coffee mixture and thoroughly wipe the surface of the products. When the paste is dry, remove the remaining residue with a brush. This method will give the shoes their former look and shine, make the leather elastic and durable;
Clean and update white skin A solution of milk and soda will help. Place a teaspoon of baking soda in a glass of skim milk and stir. Soak a cloth in the milk solution and rub the shoes. Milk will restore color, cleanse and soften the skin. However, remember that any natural dyes such as milk, onions or coffee will not last long, and such painting will have to be renewed regularly.

You should not clean your skin with gasoline or acetone, despite the fact that many recommend this cleaning method. Such solutions will ruin the material and deform the skin! In addition, perfumes and perfumes should not be allowed to get on the surface.

How to properly polish shoes

You need to rub the heel and toe most thoroughly, as these parts wear out the most. For greater strength and reliability of the products, you can apply cream to the parts of the sole that do not touch the ground when walking. Rub the product into hard-to-reach places using an old toothbrush with soft bristles or a cotton swab.

To polish your shoes to a mirror shine, first apply an even layer of polish to one shoe and place it on newspaper. Then process the second one, place it on a newspaper and let the shoes dry for 10-15 minutes. After this, cover the surface of the boots with a second layer of cream.

Leave the shoes for 8-10 hours. If you rub the products before going outside, the product will not have time to be completely absorbed and create a protective film. And in rainy and damp weather the cream will immediately wash off.

Brush off excess cream with a horsehair brush. This not only allows you to remove any remaining product, but also, due to friction, promotes deeper absorption of the cream. Use different brushes for products of different colors! Excess cream is removed from the folds of shoes using cotton pad or cotton swab. At the end of the procedure, polish the products with a piece of soft cloth.

The quality of polishing and service life depend on the type of cream. Choose a cream that matches the shoe material and the weather.

For the cold season and rainy season, choose dense and thick products based on natural organic ingredients, for example, cream made from beeswax and oils. It will create a durable waterproof film that will protect shoes from the negative effects of moisture, wet snow, temperature changes and frost.

A good jacket made of genuine leather will serve its owner for a very long time if you take care of it and update it on time. Dyeing with special dyes, which you can do yourself at home, will help return clothes to their original presentable appearance.

This operation can be performed in two ways:

use an aerosol can;
Apply water-soluble powder.

Updating a leather jacket at home using the first method is very simple. To do this, you need to buy a can of spray paint in a specialized store or market. The color does not have to match the original. By choosing a different shade, the hostess will receive new thing, which will enrich and diversify her wardrobe.

The amount of paint should be taken based on the manufacturer's recommendations. Usually the can indicates how much area can be covered with its contents. For a regular medium-sized jacket you need to take at least two units of dye. And for a coat you will need at least 2 times more.

Before applying paint, clothes should be cleaned with a damp sponge. After the skin has dried, the clothes are hung on hangers so that they hang freely without touching anything. To protect your hands, you should wear cellophane or rag gloves, and cover everything around with newspaper. The spray radius of the aerosol is quite large, so there is a risk of smearing paint on things and furniture.

The aerosol is applied from a distance of 20 cm evenly over the entire surface of the skin. Drying time is from an hour to two, the manufacturer indicates it on the packaging.

Painting with powder dye is somewhat simpler. After preparing the paint (according to the manufacturer’s recipe) in boiling water, cool it to +45°C. Do not do this again, it will ruin the jacket. The skin will become brittle and may tear quickly. Clothes are immersed in the solution for 2-3 hours, after which they are thoroughly rinsed so that the water becomes clean. Then the leather jacket is hung on hangers and allowed to dry thoroughly in a dark, ventilated room.

Experienced housewives advise placing clothes in the dye solution so that they do not twist or bend. This will allow the paint to cover everything evenly. Otherwise, there will be unpainted areas and the operation will have to be repeated.

Getting rid of old damage

When worn actively and for a long time, a leather jacket receives minor damage, including abrasions. They spoil the appearance, but you can get rid of it with simple home remedies.

Rub the damaged area with regular hand cream, and after a while the abrasion will disappear. A special leather wax will also help cope with the task. It is applied in a similar way to the leather surface of clothing.

You can also remove abrasions by rubbing the jacket with freshly peeled orange peel. On the surface of the crust there is essential oils, which impregnate the material and make the damage disappear. Rub the jacket with the outer part of the peel, pressing lightly.

Removing stains

Street dirt and traces of rain can be removed from the surface of clothing with a regular soap solution. To do this, you need to take a foam sponge, moisten it in a warm solution and wash off the dirt with gentle movements. After this, the surface of the leather jacket should be wiped dry with a napkin and lubricated with hand cream. This will protect the material from moisture and restore its softness.

If the stains on clothing are of unknown street origin (but not greasy), they can be removed by diluting soap in warm water and adding a little ammonia to it. But after such treatment, be sure to wipe the surface with cream or castor oil.

Soap can be replaced with shampoo or detergent. This will give a good effect because almost all of them contain either glycerin or other emollients.

Rust on a leather jacket or coat can be removed using gasoline. It will also help get rid of oil or nitro paint stains. To do this, soak a sponge in fuel and gently work the stain with gentle movements, dissolving and erasing it. But this method has a drawback - gasoline evaporates and emits an unpleasant odor, which can make you feel sick. Therefore, this procedure should be done in a well-ventilated area or outdoors.

But traces of machine or motor oil, as well as other similar substances, can be effectively removed using perchlorethylene.

Traces from ballpoint pen can be removed by mixing rubbing alcohol and acetic acid. It is better to work with this solution while wearing gloves to protect the skin of your hands. After cleaning, some experienced housewives recommend lubricating the treated area with cream or wax for working with the skin.

A stain from light-colored clothing can be removed by applying a mixture of talc and gasoline to it. The mixture must be pressed down (preferably using a glass plate) and left for a few minutes. The dried pulp is removed with a soft clothing brush.

Bringing back the shine

When considering how to renew a leather jacket at home, one cannot help but remember the means by which you can return the surface to its original shine.

The easiest way is to do this using chicken eggs. The whites of 2 eggs are lightly shaken and rubbed into the skin with light movements using a foam sponge. The protein is absorbed, and the clothes become like new.

Another way to renew leather clothing and restore its shine is to rub it with laundry soap with glycerin dissolved in warm water.

The material will become not only brighter, but also softer.

A similar result can be achieved by wiping the surface of the jacket lemon juice. The substances and acids it contains will make the clothes immediately “look younger”.

The castor oil mentioned above also has a “rejuvenating” effect. The material is pre-cleaned with warm soapy water and ammonia. Then the sponge is moistened in castor oil and rub the entire jacket.

For dark clothes, experienced housewives advise using ground coffee. The wet grounds remaining after brewing the drink are collected in a napkin made of undyed flannel or wool. Use the resulting swab to wipe the coat, raincoat or jacket over the entire surface.

Experts note that when returning the material to its shine, everything needs to be processed evenly. Missed places will look like dull spots, spoiling the appearance of the item. Risk areas most often are the places under the arms, where sometimes they simply forget to apply a restorative layer.

Other recovery methods

For products from matte skin There are several ways you can renew a leather jacket at home. For example, return the original beautiful view A mixture of turpentine and cow's milk will help things. They are mixed in a 1:1 ratio, and the resulting solution is applied using a foam sponge in a thin layer. This method will be very good for thin leather items.

After the clothes have dried, their surface is treated cosmetic cream for hands. It will soften the effect of turpentine and return the jacket to its softness and elasticity.

Another drug that will help give your favorite item its original appearance is Vaseline. A thin layer of ointment, evenly applied to the material with your own hands, will restore the lost shine.

The dandies of the past, who wore leather clothes during wars and revolutions almost without taking them off, returned them to their original appearance with the help of an ordinary bow. To do this, the onion was cut in half and the material was rubbed with its halves. Then you should polish the leather with a soft cloth. But since it is not so easy to remove the smell of onions, this method is not considered the most successful.

What to do so that you don’t have to remove contaminants

Clean where there is no litter. And things don’t have to be restored if you use them correctly. To extend lifespan leather clothing, it should not be washed, especially in a washing machine. After this, the material will become rough. And if it was poorly painted, it will also fade.

If you get caught in the rain without an umbrella, you should hang your outerwear on hangers and leave it to dry in a ventilated area, possibly on the balcony. After this, you need to rub the jacket with regular hand cream.

01/27/2018 0 22,346 views

During wear, things often lose their original appearance. Cracks form in the areas of bends, abrasions, dullness, and shine disappears. To restore them, not only purchased products are used, but also improvised ones. Let's consider how to update a leather jacket at home? There are many ways, and they are quite simple.

This material perfectly protects against precipitation and cold weather conditions. But it requires special, delicate care. However, you don’t always need to spend a lot of money on this. You can use products that are in every home. You just need to set aside a little time.

What is needed to renew the leather on things?

To process the jacket with your own hands, the following ingredients will be useful:

a sponge soaked in water;
gasoline or acetone;
vinegar;
formalin;
soap;
ammonia;
citrus peel;
glycerol;
liquid skin;
glue Moment;
castor oil;
egg;
butter;
coffee;
powder or spray paint;
cream for leather products.

A product made from natural materials can last a very long time, especially if you provide it with proper care. Let's look at what you need to process old things.

Methods for cleansing your skin at home are cheap and practical, but don't forget about professional gentle care products. They not only clean, but also help restore the structure of the material, add shine and disinfect. Among them are:

moisture-repellent spray. It protects from moisture and helps maintain its original appearance;
wax for leather clothes. Makes the material soft, it is used in for preventive purposes against the formation of cracks, and eliminates them if present. Also gets rid of worn areas;
special sponge. Thanks to them, the material does not wear out. The ingredients in the composition provide delicate cleansing;
foam cleaner. Removes dirt and dust and adds shine to the jacket.

There are many folk ways recovery:

Petrolatum. Apply a small layer evenly with your hands.
Onion. This product was used by dandies during revolutions and wars. They wore leather goods almost without taking them off, so they took care of it whenever possible. The vegetable was cut into two parts and the surface was rubbed. After polished soft cloth. This method has a significant drawback - the smell is very difficult to eliminate.

Now there are methods that can be used without negative consequences. Leather cleaning should not be done more than twice a year. If the product is made of artificial material, you should constantly inspect for stains and clean them immediately so that they do not become difficult to remove.

In the case when the jacket is worn, you can show originality by making a few changes. Seamstress skills and creativity will help you create a designer item. Parts are used for this purpose knitted products, inserts from different materials. Light abrasions and small holes are masked with rivets, stripes and rhinestones.

Renewal of shine

Main methods:

Eggs. Shake the two whites a little, apply with a sponge to the surface with smooth movements. The product will be absorbed, the item will shine and become soft.
Lemon juice. Citrus substances and acids will transform the product. You can make a solution with it in the composition. To do this, add a little squeezed fruit and 1 tsp to a liter of water. alcohol Lower the sponge, carry out the treatment, then wipe with a clean cloth. Apply glycerin and hang on hangers. Drying should be carried out under natural conditions. It shouldn't be hit ultra-violet rays.
Castor oil. Clean clothes with soapy water and ammonia. Dip a rag into the oil and treat.
Ground coffee. Collect wet grounds woolen fabric, wipe the black jacket.
Soap and ammonia. Dilute the soap in water, add a little alcohol. Apply the product to the item with a sponge and remove stains. Do not wet it intensively - it can cause harm. Dry with a cloth, hang on a hanger. It is important to ensure that the mixture does not get inside the product, otherwise deformation will occur.

Processing should be carried out evenly. If some areas are skipped, the appearance will deteriorate. It is worth paying attention to the armpit area - it is often forgotten.

Removing scratches and abrasions

Main methods:

Orange peel. Rub the leather coat with the outside of the peel.
Glycerol. Mix the product with water in a 1:1 ratio. There is no need to rinse afterwards.
Liquid skin. It can be purchased at the store, instructions are always included. You should cut off excess pieces of fabric and treat the area with a nail file or sandpaper. Do not rub too intensely so as not to cause harm. Carry out the degreasing procedure with cotton wool previously dipped in alcohol. Apply the product to the damage, leave for ten minutes, polish again. They scratch deep and will require two coats. The cost is quite low. The packaging should say Liqiud leather.
Glue Moment. Small tears can be covered with it. Apply the product onto a toothpick, then onto the cracks and press for 2 minutes. It can be replaced with thick transparent nail polish.

Removing dirt and salt stains

Cracks and scratches are not the only problem. Often the jacket gets dirty and there are stains on it that are difficult to remove. Dried dust and dirt are removed with a damp cloth or a special leather brush.

Grease is much more difficult to remove, so if possible, it is better to have the item dry cleaned. Acetone or gasoline will help at home. Dip the napkin into the chosen product, process it, apply glycerin or colorless cream. Before using the method, it is better to test on an inconspicuous area.

Precipitation often causes salt to form on the skin. The following tools will help resolve the problem:

vinegar. Apply to a cotton cloth and treat contaminated areas;
ammonia – 20 ml, powder or soap – 25 g, formalin – 100 ml. Mix the ingredients in a small container, apply to the jacket, rub lightly towards the middle from the edges;
soap solution, ethyl chloride, ammonia. Pour glycerin into the resulting product - 2 parts. Lower the cotton wool and carry out the treatment.

All methods with chemical elements require a test on an inconspicuous part of the jacket. It is important to take precautions and wear gloves.

White clothes require more careful care. The flaws on it are immediately obvious, and not all update methods are suitable. You can use a soap solution to deal with minor stains. The following tools will also help:

Milk. This product removes stains that have not yet set in. Heat the ingredient and lower it with a clean cloth. For greater efficiency, pour in turpentine. Process, then apply colorless cream. Dry thoroughly with a cloth.
Aspirin. Dip one tablet into water and wipe the jacket.
Hydrogen peroxide. Apply to cotton wool, then onto the surface of the item.
Makeup remover milk. Wipe with a disc, rinse clean water.
Starch or chalk. Suitable for thin soft products. Pour water into the product until it becomes mushy. Apply to stains and wait a few hours. Wash off excess with a damp soft cloth.
Alcohol. Suitable for removing pen marks. Dip the product into cotton wool and treat the dirt.

Grease builds up in areas of the jacket where it constantly touches the body. Usually these are cuffs on the sleeves and collars. To fix the problem you need to follow the following algorithm:

dip cotton wool in alcohol and treat areas;
rub with lemon juice;
apply glycerin.

To prevent this from happening again, it is better to wear scarves and scarves around your neck, and wear sweaters with long sleeves.

Restoring skin elasticity

To ensure that cracks no longer form and the material does not dry out and become frayed, you need to use ingredients with a fat base:

Castor oil. Take 50 ml of oil, mix with protein until smooth. Apply to the item.
Laundry soap. Take 1/2 piece per liter of hot water. Pour in 1 tsp. fish oil and 1.5 tbsp. l. ammonia. Carry out processing.
Butter. Take 3 parts of the product for 3 liters of water. Pour in ammonia in a ratio of 3:1.
Acetone. Wipe the jacket with the product and apply glycerin.

The methods are not suitable for nubuck, suede and patent leather products.

Odor removal

Unpleasant odor will help eliminate citrus zest. To do this, you need to wipe your jacket with it. The method can only be used for black and brown flowers.

Cleaning the lining

This part of the jacket also needs to be washed periodically, as it is no less susceptible to contamination. Do not forget that the skin should not be wet. For safe processing, you must adhere to the following rules:

turn the clothes inside out, remove the lining;
Carefully, trying to avoid liquid getting on the outside, lower the inside into the mixture of water and powder. You can also rub with soap;
wash by hand, rinse off excess;
for faster rinsing, pour in a small amount of vinegar;
wipe the lining with a damp sponge;
hang on hangers and leave at room temperature until completely dry.

The leather cannot be washed in the usual way, as it becomes rough and cracks form. If there is no other way out, you need to adhere to a number of rules:

The machine should be set to delicate mode without spin.
The temperature should not exceed 40 degrees.
Difficult stains need to be treated before washing.
To restore elasticity, you can pour low-fat cream into water.
Drying should take place horizontally, away from the radiator and other heat sources.
You shouldn't even squeeze it by hand. To get rid of moisture, you need to leave a terry cloth inside.
After the water has drained, hang the item on hangers.
Folds and wrinkled areas should be removed using steam or an iron. Ironing can only be done from the inside out.

Do not forget that if the material is initially of poor quality, it will fade after washing in the machine.

Color restoration

In the case when the clothes are still in good condition, but the color has changed a little (parts have faded, worn areas have appeared), paint should be applied. It is not necessary to look for exactly the same shade; if you wish, you can give things a radically different look.

The quantity is calculated depending on the size. Before purchasing, you need to carefully study the instructions, paying special attention to the area for which it is designed. Typically, one short jacket requires two cans of aerosol, and a long coat requires three times as much.

You need to act according to the following algorithm:

Carry out the treatment outdoors or with the windows completely open;
to prevent paint from getting into the respiratory tract, you should use a respirator and perform the procedure in special clothing;
cover all sofas, armchairs, tables with paper or oilcloth;
hang the jacket in a vertical position;
carry out the degreasing procedure on things, move the container 20 cm, start spraying;
remove excess drips with a sponge;
leave until completely dry (about an hour and a half).

The downside is that it requires a significant spray radius. The product may get on furniture or clothing.

Powder paints are also used:

Dilute in warm water, mix well so that there are no lumps left - they cause stains.
Boil the paint with two liters of water.
Wait until the temperature cools down to 45 degrees. If it is higher, the item will lose elasticity and become less durable.
Leave the clothes completely immersed in the solution for two to three hours so that the paint is well absorbed.
Rinse in clean water until the liquid becomes clear.
To fix, pour 250 ml of vinegar and 1 tbsp into a liter of water. l. salt.
Rinse thoroughly and leave to dry naturally on a hanger.

To ensure uniform coloring, do not bend or twist the item. Otherwise, you will have to repeat the procedure.

Video: how to update a leather jacket at home?

In order for the jacket to be less exposed to negative influences, it should be stored correctly. Be sure to hang it on hangers and not fold it, otherwise cracks and creases will appear. It is better to keep the item in a case made of breathable material.
Equally important is humidity - from 50 to 60 percent and temperature (about 20 degrees). The room must be dry and constantly ventilated. If you get caught in the rain wearing a jacket, you should wrap it in a towel. This will help remove moisture and prevent warping. If the product is heavily wrinkled, you can only run the iron through thick paper. Never dry on radiators or other heat sources.
Timely and delicate care will ensure long-term wear for your favorite item, maintaining a neat appearance. Should be carried out periodically preventive measures for processing, since it is much easier than masking various damages.

In case of serious contamination, you should seek the help of specialist dry cleaners. They use professional products and give recommendations for the future. The main thing is to be careful and try to get the products dirty as little as possible.

4 / 5 ( 1 vote)