How to sew a button on a jacket. How to sew a button: methods for different types of accessories

Sew a button? With a few simple tips, you can do this quickly and the button won't come off!

Take a polyester thread approximately 75 cm long (this is the length of your arm). If your buttons are metal or have sharp edges where they fasten, rub the thread with beeswax to make it last longer.

Bend the thread in half and thread the fold into a needle with a long but thin eye. Tie a knot by securing the loose and bent ends together.

Pierce the garment with a needle from the front side 1.5 cm from the pin indicating the position of the button. Make a stitch through the product to the pin, while passing the thread between the layers of fabric (see picture). Sew a few short stitches in place to secure the thread. Cut off the knot.

To avoid tension in the fastener area, flat buttons should be sewn with a small thread foot. The length of the leg must correspond to the thickness of the part on which the loops are made. It can be 1 mm on a silk blouse and 1 cm on a thick coat.

To set the desired shank length, support the button with your left hand over the garment while sewing. If the button already has a stem, enlarge it (if necessary) using thread.

Avoid sewing buttons through the collar on suits and coats (i.e. do this before placing the garment on the lining).

You only need to sew a few stitches, because you are using thread folded in four!

Strengthen the leg by wrapping the thread around it several times.

Make a few small stitches in place close to the leg to secure the thread. Pass the needle between the outer and inner parts of the product. Pull the thread and cut it close to the product, the end of the thread will be hidden between the layers of fabric.

A button sewn in this way will hold on very firmly unless it breaks itself. Metal buttons can fray the thread with which they are sewn; in such cases, it is better to first rub the thread with wax. And, in any case, buy one more button than is necessary for the model.

In preparing this article, materials from the book by Shaffer K.B. were partially used. "Encyclopedia of quick sewing."

;

Comments: 7

Posting new comments is temporarily disabled, we apologize for the inconvenience!

Pattern - a template for cutting fabric, leather and other materials. In Europe, patterns have been known since the 10th century: they were the property of members of tailor's workshops and were carefully protected from copying. In Rus', traditional clothing in its design had the simplest geometric shapes - rectangle, square, circle and did not need
in a special template for cutting.
The borrowing of Western European clothing from Rus', which became systematic from the beginning. 18th century,
required, due to the complexity of the cut, special stencils for it and special skills and abilities
calculate the cut correctly. Without a fashionable pattern it was impossible to achieve the desired sleeve shape
and sew it in correctly, tighten the waist in the right way, etc.
Paper patterns in the modern sense of the word appeared only in the 19th century. and stayed for a long time
rarity. Getting them was not an easy task. The pattern could either be ordered from a professional milliner,
or copy from the outfits ordered from Western European capitals by high society ladies,
if you managed to take advantage of their location. The pattern of a new style of dress was prestigious
thing, it could give rise to rivalry and conflicts.
The situation changed when, from the 1850s. magazines with fashion sections began to include detailed
description of new men's and female models place clothing patterns. The patterns were a drawing,
no larger than the size of a magazine page, and then began
reproduced in full size.
The beginning of industrial production paper patterns was founded by an English company founded in
London in 1860 by B. Butterick. In the 20th century, displaying life-size patterns in magazines became a means of attracting readers.

Author of the article Irina Shirokova
Greetings to all sewing lovers! Let's talk about such details of our clothes as buttons. They are present on almost all of our things and from time to time they come off, get lost, and need to be restored. How to sew on a button correctly? Surely many of you have encountered this problem. Not everyone likes this activity, but sometimes it is simply necessary.

At first glance, it may seem that nothing could be simpler than sewing on a button. I think so too, but much to my surprise, some of my clients bring me their clothes just so that I can sew buttons on them. And, oddly enough, there are women among them.

It would seem that such a thing should not be a problem for women, but not everyone likes to do something with their hands, including sewing on buttons. Although this is not at all difficult to do. But it is advisable to do it correctly. This is exactly what we will do. Perhaps you will learn something new for yourself.

Buttons are different. The most common of them:

Buttons with two holes

Buttons with four holes

Buttons on the leg (half leg)

Each of them is used for different types of clothing. It depends on the size of the button and on the item on which it will be sewn. Let's look at some options for this application. I have prepared a detailed step-by-step photo report. For clarity, I took thick threads and materials of contrasting color so that you could see it better. On real products, it is advisable to select threads to match the button.

How to sew a button with two holes

These buttons are the most commonly used. First you need to draw a cross with soap, the center of which will coincide with the center of the button. Tie a tight knot and trim off any excess thread if it sticks out of the knot. Pierce the fabric with a needle as shown in the photo. The knot should be between the lines diagonally, and the needle should come out on the line of sewing the button.

After this, we put the button on the needle and sew it with a few stitches to the fabric. If the thread is folded in half, then it is enough to pierce it three times. It is advisable to get into the same punctures. Before completing the process, the needle should be brought out between the fabric and the button on the front side, and a knot should be tied, catching the threads. For strength, it is enough to make two (three) such knots and cut the thread.

Here is the button sewn on. Notice what the reverse side looks like. There are no knots on it. The threads lie flat and are concentrated in one place.

How to sew a button with four holes

Such buttons are also used on different types of products, from shirts to coats. I took a large button. Since there are more holes in it than in the previous one, there can be many sewing options. It depends on your imagination. I decided to sew with a diagonal cross, so I placed the holes at an angle to the intended soap cross. If the holes are located along the lines, then the principle of sewing will be the same.

Similar to a button with two holes, we make three punctures in the directions we need, and bring the needle between the fabric and the button on the front side. This can be done both from below and from above.

Buttons with four holes are not very convenient in the sense that the area they are sewn to the fabric is larger than the slot of the loop into which they are threaded. Therefore, very often they stretch the loop. To prevent this from happening, it is better to tighten the threads a little. To do this, you need to make two (three) windings of the main threads under the button. After this, tie a knot on the threads.

Cut the thread and finish the job. The button is sewn on, making a neat cross on the reverse side.

How to sew a button on a leg

In this case, the knot also remains on the front side, but can be located on the button sewing line.

After several punctures, the thread is brought to the front side and secured with a knot under the button head. The knot is attached to threads, not to fabric.

Under the cap, the nodules are not visible, and on the back side everything is clean and smooth.

How to sew a button to a coat

On items such as coats (fur coats, sheepskin coats) and those with rather thick linings, buttons are sewn on in a special way. Not one, but two buttons are used in one place. From the front side and from the back side. This is done for strength.

A knot is tied and the fabric is pierced as in the case of a button with two holes. The thread is threaded through one of the holes in the top button, and a match is placed under it. This is done in order to create a distance between the surface of the material and the button.

Then you need to sew on the top and bottom buttons at the same time through the same punctures. After several punctures, the thread is brought to the front side, the match is removed, and all the threads are pulled together with several turns of the main thread. A false leg is created on which the button will be held. It is necessary to tie several knots and secure the thread. The height of the leg depends on the thickness of the product.

This is what happened as a result. Buttons are sewn on both sides.

As you can see, there is really nothing complicated, and everything is done in an elementary way. Now you know how to properly sew buttons by hand. If you have never tried to do this, now you will definitely succeed.

TIPS ON THE BUTTON SEWING PROCESS

1. If you use double-layered thread (when sewing buttons with holes), you must ensure that the thread does not twist. Otherwise, the threads may not lie very evenly, which will ruin appearance buttons

2. For thin fabrics it is better to use thin threads, for denser ones thicker.

3. When using double-fold thread, there should not be many punctures. Two or three are enough. If there is a single thread, then there should be more punctures, which may not have a very good effect on the material.

4. Make sure that the direction of the threads when sewing buttons is parallel to the loop and not perpendicular to it.

Knowing these little tricks, you can sew on any button without any problems. And, if you want to make an unusual detail out of it on your product, then I suggest you take a look at the article “How to sew buttons in an original way" There you will see how creative these ordinary objects can be. With your own hands you can make a button out of not just a decoration, but a talisman that will make your wishes come true.

I hope that everything about sewing buttons by hand has become clear to you, and now you can easily handle it yourself.

Best regards, Irina Shirokova.

Greetings to all sewing lovers! Let's talk about such details of our clothes as buttons. They are present on almost all of our things and from time to time they come off, get lost, and need to be restored. ? Surely many of you have encountered this problem. Not everyone likes this activity, but sometimes it is simply necessary.

At first glance, it may seem that nothing could be simpler than sewing. I think so too, but much to my surprise, some of my clients bring me their clothes just so that I can sew buttons on them. And, oddly enough, there are women among them.

Buttons are different. The most common of them:

Buttons with two holes

Buttons with four holes

Buttons on the leg (half leg)

How to sew a button with two holes

Here is the button sewn on. Notice what the reverse side looks like. There are no knots on it. The threads lie flat and are concentrated in one place.

How to sew a button with four holes

Such buttons are also used on different types of products, from coats. I took a large button. Since there are more holes in it than in the previous one, there can be many sewing options. It depends on your imagination. I decided to sew with a diagonal cross, so I placed the holes at an angle to the intended soap cross. If the holes are located along the lines, then the principle of sewing will be the same.

Cut the thread and finish the job. The button is sewn on, making a neat cross on the reverse side.

How to sew a button on a leg

In this case, the knot also remains on the front side, but can be located on the button sewing line.

After several punctures, the thread is brought to the front side and secured with a knot under the button head. The knot is attached to threads, not to fabric.

Under the cap, the nodules are not visible, and on the back side everything is clean and smooth.

How to sew a button to a coat

On items such as fur coats, sheepskin coats, and those with rather thick linings, buttons are sewn on in a special way. Not one, but two buttons are used in one place. From the front side and from the back side. This is done for strength.

This is what happened as a result. Buttons are sewn on both sides.

2. For thin fabrics it is better to use thin threads, for denser ones - thicker ones.

4. Make sure that the direction of the threads when sewing buttons is parallel to the loop and not perpendicular to it.

Knowing these little tricks, you can sew on any button without any problems. And, if you want to make an unusual detail out of it on your product, then I suggest you take a look at the article “”. There you will see how creative these ordinary objects can be. With your own hands you can make a button out of not just a decoration, but a talisman that will make your wishes come true.

I hope that everything about sewing buttons by hand has become clear to you, and now you can easily handle it yourself.

If the material was interesting to you, share it with your friends. Give them the opportunity to learn more about sewing and crafts.

Subscribe to the news and stay up to date with all events!

Find out even more interesting things:

DIY head wreath made of decorative flowers

Hair jewelry is very popular now. They are worn by all female representatives, from young to old. One of original accessories are wreaths and rims, ...

Well, what secret can be hidden in such an elementary task as sewing on buttons? But if you look at how many modern people Are there any clothes left that are fastened not with a zipper, Velcro or buttons, but with the help of a traditional and centuries-tested, but not always convenient accessory - a button? A couple of decades ago, almost every inhabitant of the planet knew, With 4 holes, two or on a leg, small and large, flat and voluminous - such a task took a few minutes to complete, and the result was always satisfactory.

Mastery must be in everything

Yes, indeed, it takes some effort to attach a small button to its proper place. Some may say that there is nothing difficult about this, but without proper skill and preparation, an attempt to return a lost or torn fugitive to its place may end in failure.

It is important to attach the button symmetrically in relation to the loop; it is necessary to correctly calculate the tension of the thread and make the “leg” so that the fastener does not sag excessively, but is not located too close to the fabric. Aesthetic components, such as neatness, choosing the appropriate color and thickness of thread, and even methods of sewing on buttons, are also important. As you can see, any task, even something as basic as sewing on a button, must be approached responsibly and seriously.

Frightening Amulet

In our age modern technologies and in the mass market, a button has ceased to be something special, people rarely order their clothes from tailors, and therefore the choice of fastener is more of a task for designers sewing enterprises. And in these organizations, purchasing managers are guided more by the benefits and functionality of the button, but not by its beauty and style. But just a few centuries ago it had much greater significance for a person; it was a talisman, an amulet, an indicator of his wealth and taste.

The more prosperous a person was, the more luxurious buttons he could afford. Nowadays, the majority of such products are made of cheap plastic, although samples made of metal, bone, wood and glass are available in stores, and previously buttons were real works of art. They were inlaid precious stones, covered with gold and silver, engravers applied ornate patterns, images of family coats of arms and symbolic signs to tiny clasps. Moreover, people knew how to sew a button for good luck, prosperity, and love.

The use of a clothing fastener as an amulet has a completely logical explanation. Once upon a time, small bells were attached to things; they were supposed to wake up their owner if someone touched him in his sleep. Such an “alarm” helped to avoid theft, and could even save from death, but over time the bells were replaced by ordinary buttons, although they can still fulfill their deep roots as a talisman.

Aesthetics or something more?

The secret of this consists of several components. People who sincerely believe in higher powers and superpowers of objects around a person convince that in order for such a simple thing to acquire special energy, you need to perform several fairly simple actions.

First of all, it is important to sincerely believe in what you are doing - that is, if you are skeptical about creating an amulet, then there will definitely be no result from it. Secondly, the work must be done independently. When sewing on a button for good luck, or for any other purpose, you need to mentally say what you want. It is not necessary to give the conspiracy any special word form; it must be succinct and significant and contain variations of the phrase: “With a button I sew good luck on myself, and sew away bad luck.”

It is very important to follow a special sequence in making stitches. It is for this reason that it is believed that a four-hole fastener should be used to achieve a positive result, but how do you sew on a button with 4 holes to achieve your goal?

Such different luck...

For each person, the concept of luck and luck lies in different things, so there is no one universal way to attach a button to clothing. In each specific case of making stitches, the result will be different. Thus, two horizontal parallel stripes in the center of the accessory will help you make friends and gain authority in the team, while the vertical ones will contribute to the development of intuition.

If you are interested in the question of how to sew on a button with 4 holes and thereby enhance your attractiveness or improve your health, then the answer is simple - you need to lay the thread in the form of a cross. Stitches that fix the button on the fabric and have the shape of the Latin letter Z in the correct or mirror position guarantee financial wealth and improved business reputation.

There are several more important points in turning a button into a real amulet. After all, if everything were so simple, then the most ordinary jacket with buttons would give any person a cloudless sky of cash, wealth and love to the grave. The following should be remembered:

work should be done on days when the moon is waxing;
It’s better to buy a new button;
choosing the sample that is made from natural material and I liked it, and you need to attach the amulet not to the first thing you come across, but to your favorite and often worn one.

You can sew the button from the inside out, preferably on the left side - closer to the heart.

Easy fix

So, if everything has become clear with questions of high matters, then you should understand the practical side of the problem, namely, how to sew on a button correctly, do it carefully and, most importantly, reliably.

First of all, you need to prepare the place for future repairs. Ideally, a defect in clothing is noticed at the moment when the fastener is just trying to leave its “native” place. In this case, the button must be carefully cut off without damaging the fabric, the remaining threads must be removed and returned to its proper place.

The classic and most reliable method of sewing is when the stitches form an X on the right side. In order for the work to turn out beautiful from the inside out, the stitches should not be done chaotically, but following a simple algorithm:

Secure the thread at the sewing site by making several stitches, one on top of the other.
Sew on a button, and the first puncture must be made from the wrong side, bringing the needle out in the upper left hole, and the seam must be completed from the opposite side - in the lower hole on the right.
To make a cross stitch, you need to mirror the previous steps - bring the needle and thread from the wrong side to the front side, only this time at the top right, and direct it to the lower left hole.
When sewing on a button, do not forget to make a “leg” for it, loosening the thread a little. A match or paper tube inserted between the fabric and the fastener will help to avoid excessive tension.
The stitches should be repeated several times (5-10), then secure the thread by wrapping it around the loops on the front side of the product under the button (after removing the match) and making a control stitch through the resulting “leg”.

Beauty is in the little things

All other methods of sewing a button with 4 holes differ only in that the sequence of stitches changes, but the principle and course of action remains unchanged.

When doing such work, you should pay attention to all stages of sewing. When a button comes off, as they say, “with meat”, and a piece of fabric is missing in its place, the product should first be repaired and strengthened. A very small hole can be patched up, but a larger hole can be covered from the inside with a patch. Also, clothing made of leather (jackets, raincoats, sheepskin coats) or fur cannot be done without a patch.

Naturally, before starting repairs, you need to arm yourself with tools and available materials, based on what needs to be repaired. To work with delicate and thin silk, it is better to use a thin needle with a narrow eye; accordingly, the thread should be no thicker than No. 40.

A less delicate sweater with buttons made of jersey also needs special approach. But here the difficulties will most likely arise with the choice of thread. It is advisable to use the one from which the product is knitted: both in color and structure. If there is no suitable piece, then you can choose a similar one from the assortment of threads for embroidery or crocheting. Stores also sell special plastic needles with a round tip, which helps to avoid “injury” to the knitwear.

What's easier?

Many people may decide on a whim that working with outerwear is easier than with underwear. They say the fabric is thicker, so you take a stronger thread and sew. But the difficulty of making a coat or raincoat lies not so much in the mechanism of operation or the selection of thread and needle, but in doing it correctly.

Exactly for outerwear the presence of a “leg” is fundamental important point. Its absence is a guarantee that the button will come off faster; the absence of even a small (1-2 mm) gap equal to the thickness of the floor will create discomfort during buttoning and unbuttoning clothes, the same as an incorrectly made buttonhole. A button that does not fit into the prepared loop, and is also located too close to the fabric, will not stay on the finished product for long.

For large coat buttons, it is best to use strong thread (#20) made of polyester. It is also worth considering that no matter what type of clothing you have to work with, it is best to fold a piece of thread in half. In this case, the piece should not be very short or excessively long - the optimal length is 50 cm. If you take less, there is a risk that the cut will not be enough, and the larger piece will get tangled and curled into knots.

Two in one

Another trick that is most relevant for outerwear is the use of a second button. It is sewn on the wrong side of the product, and forms a kind of “sandwich” from the top and bottom buttons and material. For this purpose, special button fasteners have been created, sometimes they are also called “counter buttons,” but the simplest flat round fasteners will do just fine.

Their use serves two purposes at once - a more reliable fixation, as well as avoiding deformation of the fabric at the place where the button is sewn, due to the fact that the material does not crumple, does not wrinkle, and knots and threads are hidden on the wrong side of the product.

Technology to help you

Buttons can be sewn on not only in the traditional way - by hand. Owners of sewing machines can use their equipment in this matter. Almost all modern sewing machines, even those intended for domestic needs, and not industrial ones, have a set of feet as standard, including a foot for sewing on buttons. It also comes with a special plate that helps you set up the machine to create loops on the product.

The work of sewing on buttons using a machine should be done using the zigzag stitch at low speed. It is important to select the desired stitch width, equal to the distance between the holes in the button, to avoid chipping the eye of the needle. To perform such work, a regular needle is suitable, unless otherwise required by the fabric. The same goes for threads.

Even people who are hardly directly related to various types of needlework perform some basic actions easily and simply. It is not at all difficult to strengthen a hook that has become loose, or to tighten loose edges, or to sew on buttons. However, there are many different nuances to the last question. Some can make the process easier, while others give completely unpredictable results. Especially when you have to work with different types buttons, or with different variations of fabric.

What buttons do you need to sew on most often?

The most commonly used buttons are the 4-hole buttons. This type of button can most often be found on a wide variety of shirts or blouses; it is very convenient in cases where the fastening location needs to be hidden as much as possible, or even simply made so that it is not noticeable.

Cross-shaped button sewing pattern

Classic scheme sewing on buttons - “crosswise”. It can be seen on all modern factory products. And according to the Old Slavic runes, which serve as the basis for patterns for stitches, this is a kind of spell for beauty and health. In this method of sewing on a button with 4 holes, in fact, there is nothing particularly complicated.

Advice

It is necessary to move the thread folded in half from the upper left corner to the lower right, and then from the right, upper corner, vice versa - to the lower left. In order to give strength, the steps must be repeated. And on the wrong side of the fabric, a small knot will thus be formed, after which the thread is cut.

Parallel stitch pattern

A parallel stitch pattern is also often used. It, in accordance with the runes, promotes harmonization and strengthening of friendly relations. Its actions are no less simple than the cruciform ones. You need to bring the thread from the upper left corner to the upper right, and then from the lower right to the lower left. If necessary, the steps can be repeated, then fixing the thread on the wrong side of the product. If you make the stitches vertical, this may well enhance your intuition.

Scheme "Z"

Those who want their business to go uphill need to sew on buttons with stitches that form the letter “Z”. The main thing here will be not to make a mistake in choosing the direction. So, for career growth, you need to move the thread in the direction from the upper left corner to the upper right, then from there through the inside out to the lower left and return to the upper right. Lastly, a stitch is made in the direction from the lower right corner, when the thread goes through the wrong side, to the lower left. If you display the algorithm in a mirror, this will contribute to a noticeable improvement in your financial situation, and the stitches that unfold or take the form of the letter “I” will become a kind of impetus for the development of your creative potential.

Structurally, more complex variations are already performed without repetition of actions, because in this case the thread passes several times through each of the holes. Using the example of the classic “criss-cross” algorithm, you can implement a complex pattern by supplementing it with stitches following a square in order to attract true love. This method, by the way, serves as a method of sewing on buttons, guaranteeing maximum strength and durability. And it doesn’t matter that you will work in 1 thread. The situation is similar with simple stitching in a square. It must be said that they are created in parallel. That is, either first you need to display only vertical ones, or exclusively horizontal ones. Such a square will be the key to harmony with the entire world around you.

Sewing a button on a leg

Sewing a button on a leg is much easier than sewing on one with holes. It’s trivial, but with it only 1 direction of the thread is possible, with only one method of fixation. To sew such a button as firmly as possible, usually 3-4 steps through the eye are enough, but only if the work is done with a thread folded in half. A single thread will pass through the eyelet up to 8 times. It will be important to keep track of the puncture sites, maintaining a distance between them equal to the thickness of the button stem.

Conclusion:

Sewing buttons is a useful skill that any modern person sometimes has to use. Depending on the design features of the button, the methods of sewing it on vary. Often this element of fittings is a kind of decor and then it is logical that it should be neatly and beautifully sewn.

How to sew on buttons