Summer crocheted blouses with short sleeves. Crochet - short sleeve blouses

Cute crochet summer jacket short sleeve will look great with many things women's wardrobe. We knitted this jacket from cotton yarn blue color, you can choose a different color of yarn - the one that best matches your skin color. A description of knitting a jacket with patterns is given for clothing size 46.

For a short sleeve crochet jacket you will need

• About three hundred grams of blue cotton yarn (or any other color that suits you).

• We will also need 6 small diameter buttons in blue or another color that matches the color of yarn you have chosen.

• Thin hook size 1 mm.

When knitting a jacket (if you are a beginner), you need to be able to crochet the following loops:

• Air loops and chains of air loops, single crochet, double crochet, connecting stitches.

• In addition, you need to know how to knit picot. To knit a picot, knit 3 air loops, then insert the hook into the first air loop and knit a single crochet.

For the convenience of describing a crocheted knitted jacket with diagrams

• We attach patterns for knitting the motif - the motif should be knitted according to the data in diagram No. 1;

• and here is a knitting pattern for a fantasy (main) pattern - it must be knitted, focusing on pattern No. 2.

We knit a women's knitted jacket with patterns No. 1 and No. 2:

Before you start knitting, check the density

To do this, knit a motif according to pattern No. 1 and a knitting pattern of a fantasy pattern measuring 10 cm. If the hook and threads are chosen correctly, then the size of the motif should be 4.5 cm on each side, and in the knitting pattern of a fantasy pattern 31 loops should be knitted along the length sample equal to 10 cm.

Description of the short sleeve crochet jacket

Back and front of a women's jacket, knitted with patterns

We knit the back and front from separate parts, the location of which is indicated in the pattern drawing.

So, when knitting the 1st and 2nd parts:

we knit 21 motifs according to pattern No. 1. We combine the motifs into a strip while knitting the 3rd row; we combine them by making connecting columns into arches (details on combining motifs are shown in diagram No. 1).

After the motifs are knitted and combined into a strip, we raise 293 loops along the upper edge of the resulting strip and knit as shown in diagram No. 2. After 12 cm is knitted according to pattern No. 2, we finish knitting and begin knitting the third part.

When knitting the 3rd part, we knit the motifs as we knitted for the first two parts. We combine 9 motifs for the 3rd part with each other during knitting, also with connecting posts. At the end of knitting, raise 125 loops along the upper edge.

Now we knit the 4th and 5th parts (we knit them symmetrically):

for each of them we knit and combine 4 motifs with each other during the knitting process. At the end of knitting, we raise 55 loops along the upper edge and knit according to the pattern in diagram No. 2. After the height is knitted 10 cm from the beginning of knitting the pattern, we close 4.5 cm for the neckline. We knit another 2 cm and finish knitting.

To form shoulder bevels for parts 4 and 5, we knit 4 stripes, each of which consists of 3 motifs.

Knitting jacket sleeves

For each sleeve we knit 8 motifs, just as in previous cases, we combine them into a strip, after that we knit a chain of 111 air loops from the edge and knit with a pattern, as indicated in diagram No. 2, adding 2 from each edge at each m row 9 times 1 loop. When the height of the knitted sleeve is 15.5 cm from the very beginning of knitting, we continue to knit straight and, upon reaching 20 cm from the beginning of knitting, we finish knitting.

Assembling the details of the jacket

Before sewing, we lay out all the parts on a flat surface, pin them with pins, and slightly moisten them (you can use a damp terry towel, which should be placed on top for 10-15 minutes). Remove the towel and wait for the parts to dry. After the pieces have dried, remove the pins and sew them together according to the instructions on the pattern drawing. When sewing the sleeves, leave the top 4.5 cm open. Sew the sleeves into the armholes, connecting and sewing the remaining 4.5 cm of the sleeves.

We tie each shelf by making 3 rows of single crochets. At the same time, on the right shelf in the 2nd row we make 6 holes for buttons. For each hole we knit 2 air loops, skip 2 loops bottom row and continue knitting further. We make the first hole by retreating about 3 cm from the bottom edge, the second by retreating about 1 cm from the top edge, and distribute the remaining holes evenly between the first and second.

We knit the entire product by performing 1 row of single crochets and 1 row, alternating 3 single crochets and 1 picot. After this we sew on the buttons.

S (M, L, XL, 2XL, 3XL)

Bust (finished product): 63.5 (66, 71, 73.5, 78.5, 84) cm

Materials

Simply Soft yarn (100% acrylic, 113 g/190 m) 3-3-4-4-5-5 skeins graphite color, 5 mm hook

Knitting density

4 repeats and 6 rows = 10x10 cm

Description

Note: the jacket consists of three parts.

Crochet pattern "open triangles"(4 rapports + 1 air.p. for turning)

Starting row: st. b/n in the 2nd air.p. from the hook, * 5 chain stitches, skip 3 chain stitches, st. b/n in the next loop, repeat from * to the end of the row, turn knitting.

1st row: 5 chain stitches, * in a chain of 5 chain stitches. knit a cluster (1 st. s/2n, 2 st. s/n at the base of the st. s/2n), 1 chain stitch, repeat from *, finish with a cluster in a chain of 5 chain stitches, 2 stitches . s/2n with a common top in st. b/n, turn knitting.

2nd row: 1 chain stitch, st. b/n, *5 air.p., st. b/n in air p., repeat from *, finish with 5 air p. and art. b/n into the turn loop of the previous row, turn the knitting.

Repeat rows 1 and 2.

Back

Dial 74 (82, 90, 98, 114, 130) air.p. and knit with the main pattern to a height of 43 (45.5, 48.5, 51, 53.5, 56) cm.

Sleeves

At the beginning and at the end there is a trace. For 2 rows, cast on 29 (29, 33, 33, 37, 37) chain stitches. for sleeves and continue knitting to a height of (20.5, 23, 23, 25.5, 28) cm, cut and fasten the thread.

Left shelf

Dial 38 (42, 46, 50, 58, 66) air.p. and knit with a pattern to a height of 35.5 (38,40.5, 43, 45.5, 48.5) cm. Division into sleeves and neckline:

Track. faces.r.: knit with a pattern until the last repeat, 1 tbsp. s/2n in the last chain of 5 chain stitches, turn the knitting.

Track. Row: 1 chain stitch, st. b/n in the next loop, *5 chain stitches, st. b/n in chain stitch, repeat from * to the end of the row, turn knitting.

Knit 4 more rows with a pattern. Repeat the last 6 rows until 4 decreases are completed, at the same time: cast on the required number of loops for the sleeve and knit as for the back. After 20.5 (20.5, 23, 23, 25.5, 28) cm, cut and fasten the thread.

Knit the right front symmetrically to the left.

Assembly

Sew shoulder seams and side seams. Fold up the sleeve cuffs and sew.

View the original model at English language Can .

Jacket with ornament

Size: 46
Hook GAMMA No. 2. , 8 buttons matching color.
Yarn 100% cotton, 175 m/50 g

Attention! Before starting work, it is necessary to make a full-size pattern and, applying work to it, make the necessary decreases and additions.

Openwork stripe: - knit according to pattern 1. Start with the loops before the rapport, repeat the loops of the rapport. Perform 1 time from the 1st p to the 5th p.

Loin mesh: - knit according to pattern 2. Do 1 time from 1st to 3rd rows, then repeat 2nd and 3rd rows.

Border: knit according to pattern 3. Do 1 time from 1st to 3rd r.

Description of work

Back and shelves: knit a chain from c. p. 74 cm long and knit 5 r. openwork stripe. Next, knit with fillet mesh. Make armholes 35 cm from the cast-on edge. 54 cm from the cast-on edge, cut out the neckline. After 59 cm from the set edge, finish the work. Then knit 5 r. along the edges of the shelves. openwork stripe.

The central part of the shelf: knit a chain of 12 c. p. and knit 5 p. openwork stripe. Next, knit with fillet mesh. Finish the work 35 cm from the cast edge. Knit 2 parts and sew together.

Sleeves: Knit a chain from c. p. length 32 cm and knit 5 r. openwork stripe. Next, knit with fillet mesh. After 11 cm from the cast-on edge, make a sleeve roll, checking the pattern.

Assembly: Sew in sleeves; Sew the central part to the shelves. Tie the bottom edge with a border. For the belt, tie a chain of air. p. 150 cm long. Pull the belt through the holes in loin mesh at a height of 17 cm, secure flat clamps at the ends. Sew buttons.

“Little Diana” special issue No. 6/2008 “Crochet”

A crocheted jacket with short sleeves is knitted quickly and easily, because the pattern from which the jacket is created is made almost with air loops. And the peplum and sleeves are made with a pineapple pattern.

The jacket looks very feminine and harmonious.

Materials:

For Russian size 46-48:

• 270 g 100% cotton = 6 skeins. In 1 skein 50 g/212.5 m
• Hook - 2.3 mm
• 3 button - 1.5 cm

Measurements:

• chest circumference: 96 cm
• back width at shoulders - 38 cm
• back length - 59.5 cm
• sleeve length - 16.5 cm

Before knitting, be sure to knit a sample, and then use the sample to calculate the number of loops!

Instructions

Back

Start knitting from the hangers. Knit the back according to pattern A.
The arrows in the diagram show where you need to tie a new thread or tear off a working one.

First shoulder.
For one shoulder, cast on 38 loops + 3 for lifting, skip the same 3 ch, and in the fourth tie 3 dc (dc), 3 ch. p. (chain loops), 3 dc in the same loop as the first three stitches, cast on 6 vp, skip 8 loops of the chain, tie sc (single crochet), skip 2 loops of the chain and tie 1 connecting loop and break the thread.

Pass 6 loops of the chain from the other end and tie a new working thread.
Knit 2 ch, skip 2 loops of the chain and knit 1 sc, skip 8 loops of the chain and in the ninth loop knit 3dc, 3 ch. and 3dc in the same loop, cast on 6 vp, 1dc above the sc in the previous row, 6 vp, work 3dc, 3 vp. and 3Dc over an arch of three vp. of the previous row, knit 5 ch, 1C3H (dc), knit 53 loops for the neckline and connect with the loop from the second row of the second shoulder, break the thread.

Second shoulder:
cast on 32 loops of the chain + 3 ch. for lifting, knit 3Dc, 3 ch, 3Dc in the same loop, 6 ch, skip 8 loops of the chain, knit 1 sc, skip 2 loops of the chain, 2 ch, 1 connecting with the chain. From the other edge of the shoulder chain, tie a working thread and 2 ch, 2 chain loops, tie 1 sc, skip 8 chain loops, and in the next chain tie 3 dc, 3 ch. and 3dc, ch 6, 1 dc above the single crochet of the previous row, ch 6, scallop of 3dc, ch 3. and 3Dc above the arch of the lower scallop, 5 ch. and 1С3Н (dc) and connect with the chain for the neck, break the thread.
We return to the same second shoulder, to its dial chain. We tie the working thread in the place where the black arrow shows in the diagram and knit 6 vp. + 3 for rise.

From this moment, knitting of the backrest begins entirely according to pattern A.
Knit straight 19 cm until the armhole is knitted.
I won’t explain how to knit the armhole; in my opinion, this can be seen very clearly in the diagram by adding air loops on both sides. After the armholes we knit straight another 23 cm.
Then we move on to knitting a basque according to pattern B.
When knitting a basque 15 cm long, do not forget to add on both sides for bevels.

Shelves

Shelves should also be started by knitting hangers.
We knit the shoulder in the same way as for the back, but only without setting the chain for the neck.

Sleeves

The sleeve here is very simple, knitted in the form of a wing, so there will be no difficulties in knitting it.
Cast on 57 loops and knit according to the sleeve pattern, part No. 4.

Assembly

Sew all the details, sew sleeves into the armholes.
Along the edge of the shelves and neckline, tie according to the pattern.
When knitting the binding, do not forget to make holes for buttons at a distance on the right shelf, as shown in the pattern.

That's it, your jacket is ready!