How to cut your bangs. How to cut your own bangs at home

Bangs are the most important detail of the hairstyle and the image as a whole. By changing it or growing it, you can change appearance person beyond recognition. Unlike the rest of your hairstyle, you can cut your bangs yourself. It is important to adhere to some rules. If you do not follow them, you can seriously ruin your hairstyle and aggravate some of the flaws in your appearance.

Bangs cutting technology

Tools needed to cut bangs:

1. Hairdressing scissors with straight blade;
2. Thinning scissors;
3. Comb with fine teeth (comb);
4. Clamps.

Straight bangs haircut

To facilitate the further process of cutting bangs, carefully comb the hair, pinch it with two fingers, pull it to the level of the bridge of the nose (or to the level of the nose - depending on the future length) and cut it off.

Posted by Olivia DeVries ? (@mrs.oliviadevries) Mar 15, 2017 at 3:27 PDT

How to cut side bangs

1. Select the bang area and pin up the rest of the hair. It is advisable to cut on dry hair.
2. Pull the bangs to the side that will have the minimum length of the bangs.
3. Thin the ends of the bangs (1/3 of the length) with thinning scissors or straight ones.

Long bangs haircut

1. Select the area of ​​the bangs;
2. Twist into a rope;
3. Using a sliding motion of the scissors from top to bottom, cut the required length;
4. Dry first on your face, then roll it onto a round brush away from your face. Option 2 - without a tourniquet

   What types of bangs are there?

   There are two main groups of bangs:

   
   

   Thickness and width

   The width of the bangs is the distance between the right and left bulges of the forehead. According to the rules, she cannot go out for whiskey, although, of course, there are exceptions. Before cutting the bangs, separate the hair with a triangular, U-shaped or parallel parting to the hairline. The thickness of the bangs depends entirely on your preferences. But we should not forget that the thicker the bangs, the less hair will remain in the main part of the hairstyle. You need to base it on how thick your hair is.

18 347 0

Hello, today we will share with you all the secrets of how to cut your bangs yourself, without unnecessary hassle at home.

Before you cut your bangs yourself, you should choose a model. Length, shape and thickness depend on the shape of the face and the condition of the hair.

Table of correspondence between facial contours and bangs length.

When choosing a bangs model, take into account the following nuances:

• wide cheekbones smooths out medium-length bangs;
• model for wavy hair requires daily adjustments with an iron and fixation with varnish;
• Suitable for thin and thin hair volumetric options covering the eyebrows.

But it's not that simple. Hairdressers call many types of bangs. After comparing all the data, choose the best option.

Masters classify this part of the hairstyle according to several parameters. This is the length, edging, parting.

Edging and length

Bangs are distinguished by the type of edging:

• flat;
• oblique;
• curved inward;
• torn;
• oval;
• stepped;
• triangular;
• serrated

There are options with lengths - short, medium, long bangs, two-level. Models can be voluminous, sparse, smooth.

Correspondence table for edging and bang shape.

Parting

Choosing new model, take into account the shape of the parting and its depth. There is a rectangular and triangular parting. The depth is selected based on the planned density. A light, rare version is done with a parting above the forehead. You can get thick bangs if you part your hair from the middle of your head.

When making a choice, you should take into account that the hair should cover all frontal bulges. In the standard version, the width reaches the temples. Some models cover this part of the head.

The way your hair is combed plays an important role. For the option with bangs on the side, you should choose the shape that is most advantageous for the open part of the forehead.

The front part of the hair is easy to adjust. The procedure is carried out independently. It is important to do everything neatly and evenly.

How to cut your own bangs at home

More often, overgrown ends are trimmed according to the existing shape. This is done if the model is satisfied, but the length needs to be adjusted.

How to make thinning

Another name for the procedure is hair thinning. It is most often used for thick hair. Such manipulation is contraindicated for sparse and thin curls. Hairdressers perform the operation on all hair as it makes the hair look natural.

The work is performed with thinning scissors. Some clients limit themselves to processing bangs. This is the most visible part of the hairstyle. The procedure is easy to do yourself if you have the appropriate tool:

1. Separate a small part from the main part of the bangs.
2. We twist it into a rope.
3. We make 2 small cuts. One in the center, the second at a distance of 2.5 cm.
4. We do the same with the following strands.
5. When the hair of the entire bang has been processed, the thinning is complete.

After this, you should comb your curls to remove cut hairs.

We do the thinning ourselves.

Preparing the tools

No special kit is required for work. It is important that the scissors are sharp. Otherwise, you won’t be able to cut your bangs successfully. Household paper scissors are not suitable. For home adjustments you will need:

• regular scissors;
• comb with thick teeth;
• mirror;
• thinning scissors;
• clamps;
• comb with a sharp end.

To properly cut your bangs, moisten them with water. Wet hair is more manageable and easier to straighten and cut. This is especially important for wavy hair. Work should be performed in a well-lit place. It is ideal to use a magnifying mirror. In this case, it is impossible to make uneven bangs. Some people think it’s better to do this, you can also read about this on our website.

How to cut bangs with a machine: step-by-step instructions

Cutting a haircut with a clipper requires certain skills. Without special experience, it is difficult to make an even haircut.

Important! Hairdressers cut bangs with scissors.

If you still want to work with a machine, you should practice first. Before you start working, you need to protect your eyes.

• The cutting level should be limited to a clear line;
• the machine is held with 2 hands to avoid jerking;
• move the blade along the intended line;
• gradually move along the entire length of the bangs.

The bangs are the first thing that catches your eye. The impression we make on others depends on its condition. At the same time, this element of the hairstyle can be easily changed and adjusted. It is important to keep your bangs in good condition, and this is not difficult to do. There would be a desire.

Properly styled and trimmed bangs are an important element of any girl’s overall look. Even the most experienced hairdresser often works for more than one hour on a beautiful hairstyle or haircut, and it will cost a lot of money. How to cut your bangs correctly if you don’t have time for a salon, but want to be dazzling? Let's look at the best haircut options at home.

Peculiarities

Correctly styled bangs always look beautiful and attractive. Fashion magazines constantly feature models with bangs of a wide variety of types: graduated and thinned, round and straight, even and torn. Well-chosen options go well with the model’s face shape, hair color and overall image.

Subtleties of choosing bangs

The choice of variety depends on a large number of factors.

Hair structure

Graduation, for example, which is performed to give the hair more volume, is hardly suitable for thin and sparse hair. In this case, experienced hairdressers offer light thinning; it will not only preserve the overall structure of the hair, but will also not deprive it of length.

If your hair is thick and strong, then most very short bangs will not work for you. To make such hair look good, it is better to make it oblique or torn.

If the hair is naturally smooth and does not curl, even bangs along the eyebrow line will be successful; if desired, you can lower it to the eyelashes. For thick and wavy hair, the graduation will be the best option. It will give your hair well-groomed and volumetric view, will help increase or decrease the oval of the face and hide unwanted areas on it.

Face shape

Depending on the shape of your face, you can choose this type of bangs: which will help visually correct prominent cheekbones or a heavy chin.

• Oval and round faces- These are universal options for which almost any bangs are suitable.

Girls with such an oval can experiment a lot with types of hairstyles, while remaining irresistible.

• For a square face shape bangs are simply vital; torn, oblique or uneven types will soften the oval and give it grace. Long, slightly curly hair will look especially good in this situation. This will give more smoothness to sharp cheekbones and chin.

• Triangular oval face needs voluminous bangs, a straight one will hide a large forehead, and an oblique and gradually lengthening one will also hide acute form chin.

For correct selection It is recommended to visit a professional stylist for items for a certain hairstyle. In any case, the styling must match the style.

No less important point in the formation of bangs is the choice of parting. There are several types of it, the main ones being triangular and U-shaped. The choice between partings depends on the length and type of bangs desired. For bob-type hairstyles and bangs, the triangle-shaped option is often used.

What will you need?

Depending on the type of styling and haircut, different tools are required, which, however, any fashionista can find in her apartment.

• Scissors. The most important thing on this list. For a quick and easy cut, you can use regular kitchen scissors, but make sure they are sharp and comfortable. For more professional and sophisticated haircuts, it is worth getting hairdressing and thinning salons.

• Mirror. Here Any will do Alternatively, even a small cosmetic mirror can be enough in the right hands to create beautiful bangs.

• Hairdryer Suitable for “wet” styling of bangs (using varnish, wax, mousse) or for adding volume.

• Comb. The choice of this tool depends entirely on your hair type and the bangs you want. A universal option would be to use two combs at once - with large and small teeth. The first option will straighten your hair, the second will help with adjusting the volume and length of your bangs.

• Water Sprayer It’s very useful for unruly hair, but you shouldn’t get too carried away with moisturizing the strands. If the bangs are already short, then after drying the hair, especially light ones, it may turn out to be even shorter.

• Clips or regular pins. They will help with fixing the hair in the desired position and with further styling.

• Hair clipper. The same indispensable tool for some fashionistas as scissors. But you should not use the machine without experience and the necessary attachments.

This is the entire list of tools that you may need, although you can add some of your own options here if you want to take an unusual approach to the choice of bangs and style.

Preparing for a haircut

• With slight moisturizing spray, even the most unruly hair straighten, visually increase in size, and are easier to shape and cut. But, as we have already advised, during the haircut itself, it is recommended to at least partially dry the strands in order to avoid an undesirable result.
• It is quite difficult to work even with wet hair - scissors can slip and individual strands can stick together. Then light fixation is acceptable; hairspray is usually used.
• Try to use only professional tools. Well-sharpened scissors or serrated clippers make cutting any hair much easier.

But don't forget to follow the safety rules.

How to trim?

Each independent hairstyle modeling, be it just adjusting the bangs or changing the entire image, begins with an assessment of your hair and head shape. This point is very important, since not every face is suitable for torn or round bangs. And not every hair will look harmonious with one style or another. There is enough a large number of Types of bangs haircuts, let's look at a few of the most popular ones.

Torn

One of the most common and controversial options. A torn bang with a successful haircut can suit any face shape; thanks to its crumbly and uneven structure, it can hide some imperfections on the forehead: pimples, wrinkles, redness. Step-by-step instruction ragged bangs haircut looks like this.

• First of all, you should separate the bangs from the rest of the curls using clips or hairpins.
• Then the hair is slightly moistened and curled into tight flagella. After this, the flagellum is cut at the desired angle (45-60 degrees), and the place for cutting is indicated in advance by eye. Keep track of the final length. It is this distance that will determine the length of the entire bang.
• Then the hair is combed, shaped into the desired hairstyle and fixed with foam, wax or hairspray.

The advantage of such a bang is obvious - due to its non-standard structure, you can independently adjust it many times and choose hair styling methods.

This option requires the master to be attentive and have a lot of patience. The main difficulty is that the ends of the hair must be straight and symmetrical. As a result, such bangs will follow a clear semicircular line without unnecessary bends. The length is chosen independently depending on the proportions of the face, most often along the eyebrow line. Let's consider the main stages.

• Using the desired parting, form the desired bangs for yourself, and secure the rest of the hair.
• We select one central strand of hair, which we will use as a guide when cutting off other curls.
• We make an even cut at a predetermined length.
• Then we follow in any convenient direction from the center of the bangs, gradually slightly increasing (round) or decreasing (arch-shaped) the cut strands. It is recommended to take a little hair each time, so the transitions will be smooth, and you will have a chance to correct something if at some point you make a mistake with the length.

• Be sure to ensure that the length of the hair on both sides of the bangs is the same and symmetrical. If you wish, you can always straighten unsuccessful curls to the desired length.
• If you want to get more natural volume, do a very light thinning (although the round type of bangs is typical for thick, regrown hair, so thinning is not necessary), if you want to fix it, spray it with a little hairspray.

Round bangs have their undeniable advantages over other types:

• will never go out of trend, with the right and beautiful round bangs you will always remain fashionable and attractive;
• does not make your face heavier, on the contrary, makes it younger, focusing attention on your facial features: eyes, chin and lips;
• ideal for girls with irregularly shaped eyebrows, a large nose or forehead;
• It simply sticks in place and doesn’t get in the way; it doesn’t need to be constantly positioned and shaped.

Straight or level

This option is more demanding on details and skillful hands. To begin with, you should be patient and calm down - trembling hands are especially undesirable if you are going to do straight bangs without additional tools for straightening your hair.

• First, still carefully select the desired length and shape of the bangs, the rest of the hair is fixed with clips.
• On the right side of the bangs, take the outermost curl; for convenience, you can pinch it between your fingers, then select the required length (usually lowered just below the eyebrow line). The dangers of wet hair length have already been said.
• The hair is cut at a slight angle to give the bangs some volume.

• We carry out the same manipulations with the outermost left curl, focusing on the already selected length of the right one.
• Then we simply choose the direction in which we will move and cut off the remaining strands in the bangs one by one.
• Hair is combed, missing strands are corrected. Light thinning is carried out using special scissors. After which the hair is dried and given the required form and, if desired, fixed.

Bangs according to hair length

A bold and extravagant option that is not suitable for all girls. But this is one of the most simple options in capable hands. Next, we will consider the stages of formation of such bangs.

• First, the necessary parting is made and the part that will go on the bangs is highlighted. The rest of the hair is fixed with clips as always.
• Some of the strands are cut to a fixed length. This length will be your guide when cutting the rest.
• Gradually we do the same with the remaining strands. After completion, we comb, adjust, and file if necessary.

Oblique

One of the most original options. Despite its rather simple appearance and uncomplicated formation process, it is able to add spectacularity and mystery to any image. To cut such bangs at home, ordinary kitchen scissors are not suitable, and for a more successful result, it is advisable to use thinning scissors already at the time of adjustment. The formation of oblique bangs can be done as follows.

• To begin, select the side from which we will start moving and the desired length.
• We take a separate strand of hair and make a cut with scissors with the tip pointing down (with an angle usually up to 45-50 degrees).
• We move carefully, choosing small strands, from top to bottom (or vice versa) in the desired direction, slightly increasing the length of the bangs with each transition. If you wish, you can leave a little more length to adjust the result later.

• After the bangs are formed, simply comb your hair and make sure that the cut line is smooth. You can also resort to thinning if you want to achieve a more natural hairstyle.

Overgrown

Many girls prefer purely natural beauty, growing long and well-groomed hair for many years. If you want to cut your bangs, these ladies have the largest choice; they can resort to any type already described above.

If a girl wants to restore the length of her hair, then this is also not a problem. Ideal for beautiful styling growing bangs will be the use of fixing elements such as bandanas, headbands and scarves on the head. For secure styling of long bangs, regular bobby pins and crab clips are also suitable.

Experienced fashionistas can safely braid their long locks into small braids, which look good on many face types.

Milling, subtleties and highlights

We have already mentioned such a process as thinning more than once. Let's take a little better look at what is included in this concept and how to do a thinning haircut yourself. Please note that the procedure is not recommended for thin and thin hair.

How to cut your own bangs?

Fashionable, properly cut or long bangs can change the image beyond recognition.

Don’t girls want to hide their flaws and emphasize their advantages as effectively as possible, without resorting to expensive procedures or make-up?

Professionals do our hair at the hairdresser, but is it possible to cut our bangs ourselves? This is what our article will be about.

How to highlight bangs correctly?

A hairstyle is not only a fresh haircut, but also a timely cut bangs. This small haircut detail is an important accent to the entire female appearance.

You need to cut your bangs by following some rules. If you ignore them, not only will your hairstyle as a whole suffer, but some appearance flaws will also become more noticeable.

• The shape of the bangs is selected taking into account the characteristics of the face and figure. Personal preferences are also important, but they are taken into account last.
• Don’t worry about the fact that there are very few options that would highlight the advantages and features of your appearance. There are so many women in the world, and they all find “their” bang shape.
• If your hairdresser has suggested the ideal bang shape for you, then within a month you will need to adjust it.
• If you don’t have time to regularly contact a hairdresser for help, or at some point you don’t have enough money for an obligatory trip to the hairdresser, then it’s a good idea to learn how to fix overgrown bangs yourself. After all, this will be a significant saving of both money and time.

Straight bangs on a hairstyle with long hair



Convex bangs



When choosing bangs, you need to take into account your face shape and hair structure.

• Long bangs that are in line with the rest of your hair are more difficult to correct on your own. It is much easier to correct growing bangs.
• The final result will depend on the scissors. Buy professional ones. If you do not plan to further trim your bangs at home, you can use regular scissors. Only they should be sharp and large. Scissors used to cut paper are not suitable for this.
• Professional hairdressers pre-wet the hair and only then start cutting. But if this is your first time taking on a haircut, even a small detail of the hairstyle, then it is better to skip the stage of wetting the hair and cut only washed and dried hair. Otherwise, you won't guess the length, and your bangs will be too short.
• If you want to cut your hair wet hair, then you should leave the length longer than expected, and when cutting curly hair, you should step back a little from the desired level.

Execution steps:

• If you've never cut your bangs before... This item is a must read! We cut off the hair with a margin of length. This way, if something happens, we can correct mistakes or adjust the shape of the bangs.
• You can start cutting your bangs only in a calm state. Good daylight, a mirror and the sharpest scissors available in the house are also required.
• We separate the strands from which we plan to make bangs from the rest of the hair. To do this, we use clips, and if the hair is long, we collect it in a ponytail or bun. Without doing this, you risk accidentally cutting off an extra curl.

• Next, we divide the bangs into parts and comb them thoroughly, using a comb with frequently and widely spaced teeth.
• Take a small curl from the section of hair selected for the bangs. We pinch it between our fingers, pulling the curl forward. Cut off a strip of hair little by little, marking the desired length. Place the scissors at an angle of 45 degrees.

• If you point the scissors at an angle of 90 degrees to the strands, you will end up with an arched bang: the strands will slide along the blades of the scissors, which means you won’t get an even bang.
• We repeat all the steps of cutting the hair with the remaining strands, removing the excess length.

• Now let's start shaping the bangs. Let's go through it with a comb and cut off the hairs that have managed to get out of the total mass. At this stage, you can correct the shape of the bangs and cut off stray hairs or hairs of different lengths.

• Let's adjust the shape of the bangs: go over it with scissors positioned at right angles.

We cut the hair, focusing on the already trimmed row

• Wet the bangs and comb them. Let's press our hand to the forehead and check whether it is neatly trimmed and whether some strands need to be straightened. Don't get too carried away: you can end up with bangs that are too short.

• We dry the bangs with a hairdryer and, if you have special scissors, profile them, going along the edge. The “teeth” of these scissors are different in size and located at different distances, which allows you to cut off more or less ends. This way, we will give the bangs lightness, and further styling will not take much time.

Thinning

• If you are confident in your abilities and have minimal experience in cutting bangs, then try dividing the strands into two horizontal layers. Cut the top one 1 mm longer than the bottom one. The bangs will be more neat and the styling process will be simplified.

How to cut side bangs yourself?

Trimming your bangs a few weeks after your next trip to the hairdresser is easier than giving your bangs a completely different shape yourself.

If you don’t want to run to the hairdresser every time and just ask to trim your bangs, then learn to do it yourself.

The most common and popular is bangs on the side: stages of haircut

• Let's outline which side we will comb the bangs on in the future, and how long it will be.
• We cut the hair diagonally, holding the scissors at an angle of 45 degrees, carefully moving along the entire length and cutting a little at a time.
• We start from the eyebrow where the bangs will begin, and then move on to the other eyebrow. The movements should be small, as if “plucking”. We thin out with thinning scissors.
• We cut it according to the same principle as any other bangs. The only difference is the length and the methods of further installation. It is better to leave a little length in reserve for the first time. Then you can go through the ends of the hair again and achieve a straight line.
• Thick bangs must be profiled, holding scissors specially designed for this purpose vertically. Place such bangs by slightly lifting them and pulling them from the roots with a round brush.
• What hairstyle is suitable for such bangs? Of course, laid on its side. Using bangs on the side, you can correct the contours of your face and give it expressiveness.
• Side bangs look stylish and a little daring. It suits almost everyone: both young girls and older ladies. In the latter case, bangs on the side can even visually rejuvenate.

Try it! Perhaps this is the kind of bangs that will suit you.

How to cut side-swept bangs yourself?

1. Wash your hair and dry your hair a little with a towel. This is enough to keep the strands fairly damp.

2. Determine the direction and length of the bangs. Remember that wet hair is heavier than dry hair. When the bangs dry, they will “jump” up. In order not to be upset later and not to swear “never pick up scissors again,” we leave a centimeter of length in reserve. If you trim your hair dry, you can see the result immediately, without waiting for the bangs to dry.

3. Separate the bangs with clips from the rest of the hair. We cut it obliquely at the angle that you outlined in advance. We direct the ends of the hair straight down, and the scissors at an angle to the hair strand.

We turn the scissors at an angle of forty-five degrees to the curls and carefully cut off the excess

4. To get the effect of oblique bangs with torn ends, you will need to cut off a little strand at an angle of 45 degrees, going 1 cm deeper. The scissors are positioned vertically, and the cuts are made diagonally.

5. Thin out the bangs to give them fullness: take a strand 1 cm thick and hold it at a right angle in front of your eyes. We take the tip with two fingers and cut off the tail thus formed. We repeat the same procedure with all the strands.

6. File out the bangs. For thin and manageable hair, a light thinning will be enough, otherwise you can completely cut off the ends. For tough and thick hair deep thinning will be required. Curly hair We don’t fillet. Otherwise, they will begin to curl even more intensely.

Let's summarize:

• The main cut is made along an inclined line
• we finally shape and thin out the ends, separating the hair into strands no more than 1 cm thick

How to cut your bangs yourself in a semicircle, straight in an arch?

If you have mastered the classic methods of cutting bangs and have trained enough, then it will not be difficult for you to perform more complex options.

• To form bangs in a semicircle, it is worth considering that only thick bangs in a semicircle will look beautiful.
  We divide the bangs into two halves.
• We cut the first part, which starts from the crown, setting the length of the future bangs.
• We also divide the remaining part of the hair into two parts. We cut in a semicircle. The scissors are directed from the middle of the bangs to the edges.
• Equalize the length on both sides.

How to cut long bangs yourself?

Long bangs will suit owners round face, since it will frame the face on both sides and visually make it narrower.

• We separate the hair (dry, since wet curls stretch, and it will be very difficult to cut the desired length), which are necessary to form long bangs, from the rest of the hair with clips. You should try to make the parting even. That’s why we use a special comb for cutting.
• As in the previous options, we divide the hair into two parts, each of which will fall on one side of the face. It is important to decide on the length of the bangs. If you are cutting long bangs for the first time, then stop at the length to the chin or to the tip of the nose.
• Place the comb on one side and pull it along the strand. Using your index and middle fingers, press the strand and cut it across the length of your hair.
• Let's repeat the procedure of cutting the strand with another part of the hair.
• Let's equalize the length of both parts.
• Again, pull the comb down the strands, pointing towards the middle of the face. If some hairs peek out from under the comb, we will cut them off. To do this, hold it between two fingers and cut off the resulting “tail.”

Video: how to cut and style long bangs?

We divide it into two parts. The first part is below the eyelid and starts from the crown. Let's cut it off first. This is necessary to adjust the length of the rest of the bangs. The remaining part of the hair is aligned with the first one. Layered scalloped bangs

If you have no experience, then it is better to thin out the torn bangs well. To do this, cut your hair starting at the front and moving up to the crown. Mistakes made will be easier to correct.

Haircut stages:

• We cut washed, dried and thoroughly combed hair. We divide them into two parts: bangs and the rest of the hair, which we separate with clips. The width of the bangs should be equal to the width of the forehead. Density -1-3 cm.
• Once again, comb the bangs well and start cutting to the desired length. We cut all the bangs straight. After this, we will begin to cut some strands at an angle.
• It remains to divide the bangs into strands, the approximate width of which is 1 cm. Place the strand between two fingers. Lift the bangs and cut off any stray hairs using a straight cut.
• We file the bangs, cutting them either with small teeth or with the entire surface of the scissor blade.

You can learn how to cut ragged bangs by watching the video.

Video: how to cut torn bangs yourself?

Bangs on two sides: how to cut

It is not difficult to cut bangs on both sides, and mistakes during cutting are practically invisible.

• Separate the bangs from the rest of the hair: divide the hair with a parting in the center, stretching it from the crown to the forehead.
• The bangs will begin approximately from the middle of the parting. Here we will place the comb, passing it to the ear. We have two identical parts of the future bangs.
• We cut both parts symmetrically. The length should be up to the line of the corners of the lips.
• “Sharpen” the strands: pinch it with your fingers at an angle to create an edge like a brush. We cut the locks. This technique will help achieve a natural effect. Some strands can be left at their original length.

Video: how to cut bangs?