DIY jellyfish hat. DIY costumes of sea creatures: jellyfish, octopus, starfish, shell, fish and submarine

The Gorgon Medusa is a symbol of ancient Greek beauty and horror. To make your own Medusa costume, attach some rubber snakes to your hair. Wear a dress in greek style, do your makeup and put on those accessories that will highlight your hairstyle. If you're still curious, read on to learn in detail how to make this outfit.

Steps

Simple Snake Hairstyle

Curl your hair. This look will work better if you start by curling your hair.

Exist different ways curl your hair. For curls that will last, use a curling iron or roller. A curling iron or curling iron is suitable for any hair type, but women with thin hair It is better to use curlers to achieve lasting results.
You can also curl your hair by braiding it. Braid a few braids before bed and leave them in overnight, or at least for a few hours before the event. Unravel the braids and gently comb your hair, dividing it into curls. The more braids you make, the more wavy your hair will be.
To create beachy waves, apply hair gel. Divide your head into sections and secure the ends of your hair at the top of your head. Let the hair fall naturally as you work. The gel will keep your hair looking wet even when it dries. It will keep the waves going for several hours. Secure your hair with green hairspray.
Please note that if you have short hair, or you want to keep things simple, just buy a wig with long, curly green hair.

Attach 15 large rubber snakes to the wig. Attach the snakes to green wire or hot, liquid glue.
- Place one snake across your head, allowing it to fall to the side. Make the snake's body look curved rather than straight. Secure the snake with wire.
- Attach another snake so that its head faces in a different direction from the first.
- Secure the remaining snakes by making a few holes in the wig and gluing them together. Also use more wire. Position the snakes so that they are evenly but not symmetrically spaced on either side of the head.
Place the wig on your head. Position the snakes so that they do not fall on your face.
- Remember that you may have to tie the snakes to your head to secure them.
Tie small snakes to your wig. If your head isn't already full of snakes, attach a few more small snakes directly to your curls.
- If possible, hide the wire in your hair.
Another version of the snake hairstyle
1. Braid your hair. Braid all your hair in many small braids.
  - You should have at least 10-12 pieces, but the more braids you can braid, the better.
  - If you have short hair, use extensions or a wig. You can also use a wig if you have long hair, but you don't want to struggle with them. Simply braid the hair onto the wig and work it around before placing it on your head.
  - Tie the braids using elastic bands.
2. Leave your hair straight or pin it up. The easiest way is to just leave your hair hanging freely, but you can also elegantly put it in a bun on top of your head.
  
  Put snakes in your hair. Secure the rubber snakes by threading them through your braids and securing them with elastic bands as needed.
Dress
1. Create a Peplos dress without seams. Peplos is a type of long ancient Greek dress worn only by women.
  - Fold a white sheet or large piece of fabric in half. The width should be slightly less than twice the span of your arms, and the length should be equal to the sum of your height and 46 cm. Fold it in half so that it is from elbow to elbow.
  - Fold 46 cm from the top.
  - Wrap the fabric around yourself. The folded part should be below your hands and one part should be open.
  - Fasten the fabric to the shoulders. Lift up enough material so that it falls over your shoulders. Secure the shoulders with a beautiful pin or brooch.
  - Secure the open part. Place the material on top of each other to create an overlap, and then secure with pins or make small knots along the edge. If you want, you can sew them together with a needle and thread.
2. Sew a simple chiton dress. The ancient Greek dress chiton was worn by both men and women. It could be either long or short.
  - Use a white material such as a sheet. It should be twice as long as your arm span and equal to your height. For a short chiton, use fabric slightly shorter than your height.
  - Fold the fabric in half. Fold the wide part of the fabric in half so that it is equal to the span of your arms, from the tips of the fingers of one hand to the tips of the other. Do not change the height.
  - Sew open edge. Turn the fabric inside out and use a forward or reverse stitch to create a strong seam along the open side of the garment. Then turn the fabric inside out again.
  - The top should be open, but the fabric should flow down your arms. Leave slits for the head and arms, and tie the rest of the fabric in knots and secure with brooches or pins. You can also use a needle and thread to secure the edges.
  - The points where the top edge will meet should be tied together with fabric, exposing areas of skin on your shoulders and arms. Do not leave the fabric in one piece covering your hands.
  - Tie the belt around your waist. You can use a white ribbon or a gold decorative belt. Pull a little material over the belt to give the waist area a loose look.

If you want to surprise your child without spending money, a jellyfish toy floating in a jar is an excellent solution to this problem. Thanks to this craft, you not only broaden your baby’s horizons, but also encourage his curiosity about nature. If a child has never been to the sea, he will be interested to know what a real jellyfish looks like, and if he has been, he will have something to show his friends.

To make a jellyfish in a jar you need:

disposable plastic bag;
scissors;
liter jar

Making a jellyfish swimming in a jar

We take scissors and cut off the handles from the bag, and also cut off the bottom evenly. The end result should be a square.
Straighten the bag and cut it on the sides. (You will get two rectangles)
(If you are right-handed) With your left hand, make a “well” - make a circle with your thumb and forefinger, put two parts of the bag on top, in the center.
Index finger right hand push the cellophane into your fist, about five cm deep, then tie the bag with thread or the remaining “handle” from the bag. (Don’t tie it too tightly, you’ll have to untie it later).
We cut the upper part of the bag into strips, 1 - 2 cm wide. We twist each strip into a tube (by rubbing hand on hand).

We untie the thread and pour water into that space. Then we tie it back tightly so that the water does not spill out.

Take a jar and fill it with water to the top. You can add a little gouache or blue watercolor paint to give the water a bright tint. Now put a plastic bag inside, with the ball facing down, close the jar and turn it over. Due to the fact that there is water there, the “jellyfish” remains exactly in the middle of the jar, and does not float to the top.

Your child will surely like your collaboration.

In this lesson you will learn how to draw anime eyes correctly. Lightweight and affordable step by step lesson for everyone who wants to learn how to draw anime.

This page is found by queries:

jellyfish costume made from bags
crafts from salafan bags
how to make a jellyfish costume from bags
DIY jellyfish costume made from garbage bags

We invite you to decide - and create for your child unusual costume! Let your son or daughter be the one and only on this holiday, let them come up with the details of the outfit together with you (and for this you need to look into books, read the texts and carefully look at the illustrations) and let them be proud of their mother, who knows how to create real magic!

What you need to create a costume:

Decide which hero is most attractive to the child. Don't force your opinion on him: if he's crazy about Spider-Man or Shrek, give him the opportunity to be in the shoes of his favorite character, and in the most literal sense.
To draw a future costume - you take on the basis, and the child is quite capable of coloring the picture and completing the details.
Adjust what was imagined with reality: can you make all the “things” that are planned, or is it too difficult. Consult with your child - how can you simplify the outfit?
Buy (or take out of the craft box) everything necessary materials and accessories, put them in one place so as not to look around the house.
Buy face painting and complete the outfit with a matching face design. Keep in mind - it is better not to use face painting if the child is under three years old!

Ideas for children's carnival costumes:

Tiger cub costume

A one-year-old baby or toddler is unlikely to like his parents’ attempts to dress him up as some handsome guy in a white shirt and tie or a snowflake in a prickly tutu.

At this age, the main thing is not to limit freedom of movement. If a child is most familiar with rompers, then it makes sense to build a costume on this basis. Here is just one idea - a tiger cub, white or red. He has paws, ears and a tail, he is incredibly cute and very natural, because he can move naturally - on all fours!

You will need:

white or orange velor fabric (preferably with the addition of lycra) for overalls. You can also use a ready-made jumpsuit suitable color, best with clasps on the back
black paint or permanent fabric marker - draw stripes
pink fabric for paws and ears

You can make a jumpsuit with a hood, or you can make a separate hat with ties. To make the ears stand, line them with cardboard or very thick fabric. Make pink “heels” on your feet.

Medusa Gorgon Costume

It's scary, it's creepy! Medusa Gorgon from the myths of Ancient Greece can scare anyone. In order to transform into a terrifying sorceress, you need to thoroughly study these same myths and find out that the Gorgon turned those who looked at her into stone. And only after that we start creating the costume.

The idea is simple: a sundress with straps, a cape, gold ornaments in the ancient Greek style and - most importantly - a hairstyle! The hair will have to be braided into many braids, secured with thin wire and given the appearance of writhing snakes.

You will need:

black fabric
gold braid
thin wire that holds its shape
open sandals or sandals

Additionally:

Shiny beads, earrings, bracelets. Be sure to rehearse the unblinking glance from under your brows, which will turn anyone to stone. You shouldn’t think that your child will be too scared: according to psychologists, “feeling” your fear is very useful and helps you feel more confident. It’s no wonder that children love horror films and scary stories so much.

Face painting: in order to create the image of a Gorgon, you can try painting huge black eyes and painting your face with silver paint. Or you can imitate such long eyelashes, which also wriggle like snakes.

How to make a cowboy and superman costume

Wild West cowboy costume

No boy would refuse to become a real cowboy, even for an evening. The costume is not as complicated as it seems at first glance. Regular jeans are transformed into leather cowboy pants with the help of leg extensions that are held on by a belt. A vest, scarf and hat can be found in any home. There’s little left to do: put as many pistols in your pockets as possible and rehearse your cowboy squint with the words: “Who’s trying to break the law here?”

You will need:

faux leather or thick fabric for pants
vest made from the same fabric
thick leather belt
colored scarf for neck
hat with brim, hat string

Additionally:

Pistols, shotguns, spurs. You can make a sheriff's star out of a tin can lid. By the way, cowboys come from America, so you can learn a few “killer” phrases in English like “You did a good job for me...” (an excellent reason to remember and repeat English grammar).

Face painting: slight unshavenness is created by carefully shading black paint. Use black dots to draw stubble and highlight the lines of the eyebrows - the cowboy is a little frowny, but you can definitely rely on him!

Superman costume

Even if you are only four months old and cannot sit up yet, it does not mean that you cannot dress up in carnival costume. Now - to the delight of loving relatives. And in three years, your grown-up baby will be absolutely delighted when he sees himself in a photo like this, for example, in a Superman outfit!

This costume is very easy to make and can then be used as a regular envelope for home.

You will need:

red, blue and yellow fabric
fabric glue

Additionally:

You can make ties or Velcro fasteners on the back. The main thing is that the fabric should be breathable so that the child does not sweat, and soft so that it does not rub the skin.

How to make an Indian costume

If a girl can’t sit still, if she’s always willing to jump, fight and climb into places she shouldn’t, why should she dress up as boring princesses or snowflakes? Here's a DIY Indian costume for a girl - it's just her! To become the leader of the Redskins you don’t need much - the main thing is more amulets, feathers and war paint. And you can run legally.

Indian costume for girls

Indian costume made from scrap materials:

large long-sleeve T-shirt (like dad's)
textile tapes with geometric patterns of different widths, which are sewn onto a T-shirt
headband
fringe
bird feathers that can be attached to a bandage

Additionally for the Indian costume:

Bow and arrows, amulets in the form of heads, birds, etc. Practice phrases like: “Stop, pale-faced friend!” or “Comanche, go!” - and teach the child to freeze with a motionless face and palm facing outward. Success guaranteed!

Face painting: here you can allow yourself to fantasize - after all, each of the Indian tribes carefully preserves its own way of painting the face and body. Stripes of all colors, circles, diamonds, triangles, the main thing is to come up with a legend about why this particular thing was drawn. Therefore, you can read a couple of books about Indians. Other DIY children's costumes.

Hussar costume during parade

This costume looks especially cute on boys 3-6 years old, because at this age they begin the time of admiration for everything military - pistols, sabers, uniforms and all that. And making an outfit is not that difficult.

You will need:

suit made of thick fabric (for example, corduroy)
gold braid for embroidery
high boots
white fabric for the cape, the edges of which are also trimmed with gold

To prevent your child from getting too hot, make covers that imitate boots from shape-holding fabric. Sew an elastic band at the bottom and you can put these covers on top of slippers or shoes. Sew a cap from the same fabric, however, you can also use a black grandfather’s hat, cutting off its wide brim.

Additionally:

Pistol, saber or saber. A toy guitar will look funny in the hands of a young hussar. Or you can learn a cheerful hussar song with your baby.

How to make a costume of a knight and a girl from the north

Northern girl costume

She knows how to drive a dog sled, catch fish and light a fire. A northern woman's costume can be different, the main thing is that it should be trimmed with fur, as befits residents of cold regions. Short dress a shiny fabric or a mom's blouse would work well as a base. You can also use a light long jacket with a hood.

You will need:

base (if the fabric is not shiny, then it is better to decorate it with snowflakes or silver sparkles)
artificial fur for finishing the hood, sleeves, ties and hem
“high boots” - covers sewn from two pieces of fur, with elastic bands at the bottom (for fastening at the bottom of shoes or sneakers)
glitter headband

Additionally:

Face painting: like real Eskimos, the eyes lined with black paint look slanted, and the graphic fish on the cheek resemble designs that have been used since ancient times by northern peoples in folklore.

Knight costume

The image does not necessarily have to be sad, but it is still desirable to be strict. A knight should behave with restraint, politely (should we repeat the rules of etiquette?) and be kind to the ladies around him. The main thing in a costume is the coat of arms, which needs to be invented and explained. You can sew a tunic, or you can use a long white T-shirt. On the feet there are imitation soft boots (take adult knee socks and tie them up with an elastic band), on the head there is a soft helmet made of silver fabric.

You will need:

white long T-shirt or jumper
black jersey trousers
high knitted knee socks
fabric for the coat of arms that you will attach to the tunic
silver fabric for helmet

Additionally:

Of course, the knight is entitled to a shield and a sword, and also a portrait of a beautiful lady, for whose sake the feats are performed.

Face painting: a knight can slightly emphasize his eyebrows and draw the same family coat of arms on his cheek.

A pleasant event unexpectedly appeared - a masquerade ball! Order from the studio, run around the shops looking for original costumes you don't have the time or money! What to do?! Well, firstly, calm down, secondly, remember that we can do everything with our own hands and thirdly, look around. What do we always have a lot of at home? Right! Plastic bottles, newspapers, garbage bags, boxes. From this we will make the most original carnival costume with our own hands.

From plastic bottles

Mermaid or kikimora

The most a nice place for a plastic bottle this is the bottom. We cut a lot of them at once. They will decorate the hem of the dress, the bodice, and you can use them to glue together an original crown. For a mermaid or kikimora costume we will need green bottles.

After cutting off the bottoms, you still need to cut off the necks, and then carefully and evenly cut the rest of the bottle lengthwise into three equal parts. Burn small holes in the narrow part and gather them on a cord into a garland, which will become a skirt. Glue, sew or staple the bottoms along the edge of the skirt.

It is better to make the bodice of the dress by covering an old T-shirt with green plastic parts. But the crown can be assembled from lush feathers cut from bottles and attached to a hoop or ribbon.

Princess of Flowers

The standing skirt for this costume is made from a wire frame. Any thin fabric can be stretched over it. This is where the difficulties end and the creative part begins. Cut petals from bottles of different colors, collect them into flowers and attach them to the skirt. Cut half-liter bottles in a spiral and attach the “serpentine” to the skirt.

A boy's costume can be made from scrap materials by simply tying two plastic bottles and attaching them upside down to the astronaut's back using straps. To make our jetpack functional, glue red-orange patches simulating fire into the necks with your own hands.

Helmet, hat, crown

The largest plastic bottles are simply specially produced in order to make various headdresses from them for a hero, an alien, a king, a gentleman, a puss in boots, etc.

DIY glowing jellyfish costume

Since the fiber optic glow effect is very exciting, I decided to make a luminous skirt for my friend using RGB LEDs in its creation. It took some time to come up with the design and how to attach the fiber to the LED strip. I finally did it: strands of fiber optic filaments are glued together inside vinyl tubes that are glued to the LED strip. On the back there is a pouch for the battery and microcontroller, which supplies power and data to the LEDs. Since the LEDs are addressable, the skirt can light up in different places with pre-programmed colors and patterns.

This is a rather complex project, so I recommend that you familiarize yourself with the operation of RGB LEDs in advance and learn about the rules for programming the controller using the Arduino IDE program. But don’t worry too much, you don’t need very great soldering skills or great programming knowledge.

Step 1: Materials Required

Fiber optic thread 200pcs, 2 m long, 0.05 cm in diameter
Addressable LED strip 5V RGB (60pcs/m) with silicone protection
Arduino microcontroller
Lithium-ion polymer battery or USB battery
Transparent vinyl tube, 0.6cm diameter
Clear, fast drying epoxy resin or E6000 plastic adhesive
Reinforced adhesive tape
Heat shrink tube, 1cm diameter
Stranded copper cable 22 AWG, 1.5 mm cross-section
Thin belt, fabric for a battery bag
Various instrument

Step 2: RGB LED Strips

RGB LEDs can light up in different colors because they are addressed separately from each other. Each RGB LED has red, green and blue colors, and is controlled by a tiny chip. Because of the chip, RGB LED is smarter than regular LED. Each LED chip knows its position on the strip and can also control the brightness of red, green and of blue color on an individual basis. In this way, different color models can be programmed. For this project, I recommend using LED strips with a density of 60 LEDs per linear meter.

Step 3: Microcontroller

For this project I used the Adafruit FLORA microcontroller. It has a more powerful Atmel Mega microprocessor (32u4) and can be used for complex projects (connecting multiple sensors, microphones, etc.). The board has a USB port and a JST connector for connecting a lithium polymer battery. In addition, there are 14 pins (8 data, 3 GND and 3 power) there is also an on/off function on the board itself.

Step 4: Power Supply

To implement this project, you can use a 2500 mAh lithium polymer battery, which will ensure continuous operation of the LEDs for just over 2 hours. But for safety reasons, I recommend using USB batteries.

Step 5: Preparing LED Strips

Next you need to cut the strip to the required length. My strip has 60 LEDs per meter. After cutting a piece 70 cm long (this is the diameter of my girlfriend's waist), I was left with 42 LEDs on the strip. Then power and data wires approximately 50cm long are soldered to this section. Bare solder joints are covered with heat-shrink tubing.

Step 6: Preparing Fiber Optic Bundles

Since I wanted the skirt to be about 50cm long, I cut the fiber optic strand three times and got 800 50cm fibers.

Now, small bundles of fibers must be glued to each LED. I used clear vinyl tubes, cut into 3cm lengths, to bundle the fibers. I put about 17 fibers into each tube, passing them through the tube with a release of about 3-4cm. Try to use as many fibers per tube as its diameter allows, this will give a stronger glow effect.

Then you need to glue all the ends of the fibers into a single shank. Apply glue to the ends, and make sure the glue gets evenly between all the fibers. After applying the glue, carefully pull the fibers back into the tube. For this procedure it is best to use E6000 glue

After the glue has dried, use a sharp knife to trim the edge of the tube, about 0.5 cm. Remember, the cleaner the cut, the better the fibers will transmit light. To increase the brightness of the glow, the cut edge should be melted a little using an open fire, but not too much.

Then, to give your skirt volume, you need to straighten each bundle of fibers and fix them in this position with a glue gun.

Step 7: Installing Fiber Optic Bundles on the LEDs

The LED strip has a removable, waterproof silicone protection. To attach the fiber bundle to the top of each LED, you need to make a small holder of sorts using hot glue. Place the fiber optic strands on top of the LEDs and apply some hot glue around - wait for it to dry. Repeat this operation for all other fiber bundles, individually. Then carefully melt the glue to the side and glue 4-5 tubes together - pay close attention to the distance between the vinyl tubes, it should match the distance between the LEDs.

Using reinforced adhesive tape, secure the prepared fiber bundles to the belt. Pass the wires from the outermost LED on the tape through the hole made in the belt and secure it to approximately the middle of the back on the inside of the belt, leave the remaining ends free for connection to the controller.

Step 8: Making the Battery Pocket

For the battery and microcontroller, I sewed a small pocket. If you can't sew, just cut two square pieces of fabric and glue them together. To attach it to the belt, I cut a square with a handle from plastic mesh fabric. The square should be about the same size as the battery pocket. Attach it to the belt where the free wires from the LEDs exit.

I made the belt fastener from regular fabric Velcro 10cm long. For extra security, I added three extra pieces of Velcro across this clasp.

Connect your controller to your computer via USB and use the Arduino IDE to upload the code to the controller. An example of program code can be downloaded here:

Step 10: Connecting the LEDs to the Microcontroller

Solder the +5V wire from the LED strip to the VBAT pin on the microcontroller, the ground wire to GND and the data wire to the pin defined in the LED controller code that you downloaded to the microcontroller. For example, I chose pin No. 6. To prevent the wires from coming off, I glued the controller to a piece of plastic and protected the pins with hot glue. You can also see a push button switch in the left corner - I added this to switch between different LED effects.