How to make big toys for the Christmas tree. DIY Christmas tree toys
Christmas decorations DIY decorations can often be found on Christmas trees made of any materials and any color. There are both huge and small. They always get along well with old crafts and homemade decorations.
Crafts are made in such a way that they can not only be hung on the Christmas tree, but also attached to the branches using clothespins. Rich decor is also applied to the surface of the crafts and then it will be bright and attractive.
Decorated Christmas tree, an indispensable attribute of everyone New Year's holidays- the center of the New Year's celebration. Coming up with Christmas tree decorations and making them yourself is not as difficult as it seems at first glance.
DIY Christmas tree decorations “Birdhouses” from scrap materials
Create an idea for birds from scrap materials and turn it into fairy-tale houses. Birds live in the forest, where the fir trees grow and where it comes from. New Year.
Master class on creating a New Year's toy:
1. For the craft you will need a drawing (pattern) of a house.
2. We cut out the pattern without allowances, because cardboard is a hard material. But if you took paper, then allowances would be needed for gluing.
3. Place the cut out template on thick cardboard, trace it with a pencil and cut it out with a stationery knife using a ruler.
4. All that remains is to cut a hole for the bird. To do this, put a cork on the circle and carefully use a knife to make cuts in the circle and squeeze out the cut out circle.
5. You will get this project for a cardboard house. Make cuts where the corners and roof are bent so that the fold is even.
6. Bend the cut cardboard and secure all parts with paper tape.
7. Using polymer glue, glue the twine loop. Apply glue to the roof slopes and glue the twine in oval circles.
8. Spread glue on all the walls of the house and cover all the walls with twine all around. Let the glue dry and then cut out the hole with scissors. Glue a piece of twine around the hole.
9. Separate the scales from the cone and stick them on the roof. Start gluing the flakes from the lower eaves to the ridge, this is how real roofs are made.
10. Using white acrylic paint, apply “snow” to the roof.
11. DIY Christmas tree decorations, surrounded by a white coating, look more fabulous. Apply a little white paint to the walls of the house.
12. For decoration, stick an artificial green sprig near the hole, as well as red and white berries.
13. DIY Christmas tree toy “Birdhouses” from scrap materials is ready. Make 2-3 of these houses and the tree will immediately come to life.
Fluffy striped mitten
Completing of the work:
- Draw a picture of a mitten on cardboard and it’s very simple. Cut out the outline of the mitten.
- Carefully coat the cuffs of the mittens with glue and add a layer of buckwheat on top. Leave it like this until it dries completely. Then shake off the excess grain.
- Next, apply glue to another strip of the mitten and fill it with rice and dry well.
- In this way, decorate the entire mitten from top to bottom, alternating rice and buckwheat.
- Glue a loop at the top of the mitten and decorate with a bow.
Focus your imagination on another drawing and DIY Christmas tree decorations will expand your range using millet cereals.
Master class on making cones for a Christmas tree with decorations - video
Applying decor to crafts made from pine cones is quite simple.
DIY Christmas tree decorations master class
It’s very easy to make your own New Year’s toys from tape reels. They look great on the Christmas tree; they don’t sell such beautiful arrangements in the store.
Master class on creating toys for the Christmas tree:
1. Our task is to make according to a ready-made sample (a previously made craft). Cut the tape spool in half.
2. Cover the tape spool with narrow red tape (1 cm wide) using hot glue.
3. Then you need to make a flower (or bow) decoration. The flower will consist of 7 petals of the first row, 3 petals of the second row and 3 petals of the 3rd row.
4. Cut pieces (10 cm long) from the same narrow red ribbon to create petals. Take a piece of tape, connect the ends and burn them over the fire of a lighter. The ends are firmly connected to each other. Connect the ends of all petals in this way.
5. Apply glue to the place of the bow (flower) and begin gluing the petals (loops) of the 1st row in a circle.
6. This is what glued 1 row of petals should look like.
7. The side view is already perceived as DIY Christmas tree decorations, pleasing to the eye.
8. To hang the craft on the Christmas tree, cut a ribbon 20 cm long and solder the ends over the fire. Then glue the loop to the center of the flower. Press a decoration in the form of a beautiful bead onto the hot glue in the middle of the loop.
9. Glue rhinestones to the side surfaces of the decorated ring with a self-adhesive base.
10. Consider filling the inner space of the ring. To do this, take 3 plastic hearts and shiny decorative thread.
11. Punch holes in the hearts, drip glue and insert a piece of thread. Do this for all hearts. Using glue, connect all 3 ends of the threads together and let dry.
12. Apply glue to the inside of the ring under the flower and press with your fingers. The heart decoration holds up well and fills the inside of the ring nicely.
13. DIY Christmas tree decorations look very beautiful from above.
14. In this way, step by step, following all the steps, a New Year’s toy was made for the Christmas tree.
By the way, were the children near you? If so, then you have helped children discover joyful moments of creativity that they will remember for the rest of their lives.
DIY Christmas tree decorations “Gilded skates”
Make your own Christmas tree decorations using yellow millet and beans. How many fairy tales have been written about skates and children know them well.
Action plan:
1. Draw a sketch of skates with a boot on paper. Cut out the design and place it on hard cardboard. Trace the pattern of the boot with a skate with a pencil and cut it out. You will have a blank template that needs to be decorated with decor.
2. Take 4 beans of the same size and glue them along the front of the shoe.
3. Apply a thick, even layer of glue to the entire shoe. Sprinkle yellow millet on top. Dry the glue and shake off any excess grain.
4. Paint the skate runners gold. To prevent paint from getting on the top part where the grain is, cover it with paper and apply spray paint only to the runners.
5. Glue a ribbon to the back of the shoe at the top to hang it on a branch. Apply decor in a similar way to the reverse side of the craft.
Video on how to make Christmas tree decorations with your own hands in the form of hearts from tinsel
You can make your choice from the proposed crafts and, together with your children, organize a family master class on making Christmas tree toys. Work with your soul and good luck to everyone!
Very soon the pre-New Year bustle will begin, preparing for the festive fun, buying gifts, decorating Christmas trees and houses. Let's talk about how you can decorate a Christmas tree at home, in kindergarten and at school, and outside in the yard with your own hands. After all, from everything that is at hand, you can come up with and make amazing things on your own, including New Year’s decorations for the main beauty of the holiday.
In this article we will look at DIY Christmas tree decorations from scrap materials with detailed descriptions and photographs. We invite you to get creative and feel the spirit of the holiday now. Involve children in the process, they will be incredibly happy to make it together with their parents Christmas decorations, and then hang them on the Christmas tree.
This time we won't spend money on buying expensive jewelry for a Christmas tree or materials for making them yourself, let's use everything that can usually be found at home.
Let's use a little imagination and as a result we will get amazing, exclusive and incredibly beautiful Christmas tree decorations.
Surely many people have light bulbs at home, ordinary incandescent lamps, that have already burned out and are not used. They can be of any size and shape. They can be used to create amazing Christmas tree decorations. We decorate these light bulbs with paints, sparkles, fabric, turning them into icicles, balls or interesting characters: Santa Claus, penguins, dogs, gnomes, or anyone else.
Let's take a step-by-step look at how to create an interesting Christmas tree decoration with your own hands from scrap materials using a light bulb. This will be a funny snowman.
Let's prepare everything you need:
- Bulb. You can take more than one.
- A little fabric, whatever you have for the cap.
- Braid (for the loop for which we will hang the toy on the Christmas tree).
- Paints. It is better to use acrylic, but gouache will also work.
- Brushes.
- Glue. You can use a second or thermal gun.
Let's start the creative process:
- Let's color the light bulb White color and let it dry completely.
- Let's paint the snowman's face and hands with mittens. The muzzle can be made completely primitive or whatever you want. You can draw a snowman and a broom into handles and buttons on clothes.
- Now the cap. We cut out a small rectangle from the fabric, fold it in half and sew it together, tie the top with a ribbon and a bow. We put the cap on the snowman light bulb and glue it carefully.
- He attaches a ribbon for hanging toys.
That's it, the snowman is ready. Using this principle, you can make any toy - an animal from simple light bulbs.
Moreover, you can simply decorate the light bulbs beautifully and attach a ribbon to them and send them to the Christmas tree. For example, a light bulb can be coated with PVA glue and thoroughly dipped in small glitter or any cereal, and then painted over with gold paint. Here you have it simple and original jewelry for the Christmas tree, made with your own hands.
We use any thread for toys
Christmas tree decorations can be created from simple threads for knitting or sewing. Don't be afraid, you won't have to sew or knit here. Everything is much simpler! Let's see what you can make from thread for a Christmas tree.
Option 1 – elegant, multi-colored, openwork balls made of threads
What you need for work:
- Any thread, any colors.
- PVA glue.
- Air balloons.
- Braid for loops.
- Any decorations to decorate the balls: rhinestones, sequins, artificial spruce branches, in general, everything you can find at home.
Let's start creating balls:
- First, let's make the base - the balls themselves. To do this we inflate air balloons the diameter we need. These can be very small balls or larger ones, for a street Christmas tree or for a school Christmas tree.
- Wrap the inflated ball with regular plastic wrap. We pierce a tube of PVA glue and pass a thread through it. Now we simply wrap the inflated balloons randomly with glue and thread. We wrap it so that the threads cover the entire surface of the balls. We break the thread, hide the tip under any thread and coat the ball with glue again.
- Let the balls dry overnight.
- Now we burst the inflated balloons and take them out. We got thread openwork balls for the Christmas tree.
- We tie a loop of braid to them and decorate them to your taste.
- Such balls can be made in unlimited quantities and of different sizes and colors.
Option 2 – openwork stars and Christmas trees made of threads
You can make such DIY Christmas tree toys from scrap materials for children or together with them, using the instructions in the photo below and the description. The photo shows how to make a star. But using this principle, you can make a Christmas tree or any other figures.
Let's prepare everything you need for work:
- Knitting threads of any color.
- PVA glue.
- A small bowl where you pour glue and soak the threads.
- Foam base for work. You can use a disposable food tray.
- Pins or simple matches.
We begin the process of creating an openwork star from threads:
- Pour PVA glue into a bowl and soak the threads there.
- We prick the shape of the toy on a foam base. In this case it is an asterisk.
- First, we form the outline of the toy using pinned matches (or pins) by wrapping them with thread from a bowl.
- Now we fill the middle of the figure with thread, laying it chaotically, making fancy curls.
- Afterwards, you can blot the figurine with a sponge and glue again and leave it to dry overnight.
- When our toy has dried, we tie a loop to it and hang it on the tree.
Paper toys
We must not forget and push into the background the good old paper snowflakes and toys. But today they can sound in a new way if modern techniques are used to create them. In general, do-it-yourself Christmas tree decorations made from scrap materials, in particular from paper - great idea for children in kindergarten. They can decorate a Christmas tree in a group.
And the kids will be happy to look at festive outfit forest guest and boast that it was they and their mother who made this or that toy.
Let's look at how you can make Christmas tree decorations using the quilling technique with your own hands.
For work we need:
Strips of paper, 1.5 or 2 cm wide. You can cut them yourself from thick colored double-sided paper or buy them ready-made in craft stores.
- Scissors.
- Thread or braid for a loop.
- PVA glue.
Making a ball:
- Take a strip of any color 20 centimeters long and close it into a circle, gluing the ends together.
- We do this with several more stripes of different colors.
- Now we thread each circle into one another randomly, changing and alternating colors. We do this in such a way as to form a ball. We glue the strips together at the points of contact.
- We attach a loop to the ball. That's it, the ball is ready.
Making an icicle:
- Take a strip of light color 6 cm long, bend it in half and glue the ends. The result is a loop.
- Now take the next strip, darker and a couple of centimeters longer. We bend it into a loop around the previous loop and glue the ends on the sides of the ends of the small loop.
- We do this with several more stripes of different colors and each time we take a strip 2 centimeters longer.
- We wrap a strip around the junction of the loops and attach the braid.
In addition, you can make snowflakes out of paper by cutting them out according to a template and hanging them on a ribbon. And, openwork snowflakes can be made from ordinary pasta, which is found in almost every home.
Pasta for the Christmas tree
From regular pasta different shapes you can create amazing Christmas tree decorations. Let's see how you can make a snowflake.
Pasta snowflake in the shape of shells
Let's prepare everything you need:
- Shell-shaped pasta (several large and one small).
- Hot glue.
- Braid for loop.
Let's get started:
- Place a small shell in the center, and around 6 large pasta in the shape of shells. Glue the pasta together at the joints.
- Attach the braid.
Openwork snowflake made of round pasta
Pasta round shape with veins.
- Hot glue.
- Gold acrylic paint (you can use an aerosol or regular acrylic in a jar and a brush).
- Braid for loop.
Let's get started:
- Place the pasta in rays from the center. Glue the pasta together at the joints.
- Cover with golden paint and let dry.
- Attach the braid.
This way you can make snowflakes of any shape using various pasta that you have at home.
You can also paste pasta onto any foam plastic ball, attach braid to it, cover it with paint and safely send it to your Christmas tree. Let's see how else you can decorate foam balls or any other regular old Christmas tree balls.
Snowflakes from pasta master class
Balloon decor using improvised materials
Any old ball can be decorated with improvised objects. To do this, you just need to glue what you found at home onto the ball, and if necessary, cover it with paint or glitter.
You can decorate with such improvised materials Christmas ball:
- buttons and snaps;
- disk fragments;
- pasta;
- coffee beans or any cereal;
- beads, sequins, rhinestones;
- pieces of newsprint;
- feathers;
- fabric flowers;
- even nuts and gears.
You can use everything you can find at home; the more unusual the parts you find, the more creative the toy will be.
Delicious toys for the Christmas tree
Returning to the topic of edible and tasty decor for if, we suggest creating toys using cinnamon sticks, bergenia stars and orange slices. These will be stylish decorations. They will not only add beauty and sophistication to your Christmas tree, but also add a touch of refined and refined aroma.
To make them, you just need to dry the cut oranges and combine the above ingredients in any composition. This could be a pair of cinnamon sticks with a star anise star glued to them, or just a round orange on a string.
You can also glue a cinnamon stick and a few coffee beans to an orange slice. The entire composition can be decorated with small bows or ribbon or jute rope.
Below is a selection of photos for inspiration for similar DIY Christmas tree decorations made from scrap materials. In addition, you can take regular candies in candy wrappers and hang them on the Christmas tree by a string. And tasty and beautiful and New Year's style. And on a lazy New Year's weekend, you can enjoy one piece of candy straight from the Christmas tree.
We decorate a street Christmas tree with toys made from plastic bottles and cups
Now let's see what Christmas tree decorations you can create with your own hands from scrap materials for a street Christmas tree. There is also a lot of room for imagination here. We suggest using ordinary ones for the creative process. plastic bottles and cups of yogurt or sour cream.
Let's make a cute penguin for the street tree.
Let's prepare everything you need for work:
- Two plastic bottles.
- Acrylic paints and a wide and thin brush.
- Some thread for knitting.
- A scrap of fabric for a scarf.
- Braid for loop.
- Glue.
- Paper patch or tape.
Let's start creating a penguin:
- We cut off the bottom of one plastic bottle so that its height is 5-6 centimeters. Cut off the top of the second bottle and set it aside. The base should remain about 20 centimeters high.
- We glue the two parts together with tape or adhesive tape, the bottom on top of the base.
- The result was an oval figurine of the future penguin.
- We paint the entire figure with black acrylic paint and let it dry thoroughly.
- Now paint the penguin’s belly and face with white paint and let it dry.
- We paint the upper part in any color for the hat and let it dry.
- Draw the details of the cap and muzzle (eyes, key). Let it dry.
- We make a pompom from threads and glue it on top of the hat.
- We make a scarf from a strip of fabric, cut terry along the edges, and tie it to the penguin.
- We thread the braid through, making a small through hole at the top.
- The toy is ready.
A similar toy is suitable for a forest beauty in the yard if you use acrylic paints. When they are dry, they are not afraid of either snow or rain.
You can make a snowman or Santa Claus, or even a dog, in the same way. You just need to decorate the figurine accordingly. Put a cap on Santa Claus, and attach fabric ears to the dog.
Snowflakes made from the bottoms of plastic bottles are another option for a street Christmas tree. How to make them:
- Cut off the bottoms of the bottles.
- Using acrylic paint we draw any pattern on them. Let it dry.
- We thread the ribbon through the hole made on one side and hang it on the Christmas tree.
There is nothing easier than making these snowflakes.
Bells from plastic cups yogurt or sour cream can also decorate a street Christmas tree.
To do this, you need to take any glass, turn it over - this is the bell. You can hang a bead on a string inside and thread the braid through the bottom, making a loop. This bell can be decorated to your liking and depending on what you have on hand.
You can wrap it with braid, decorate it with rhinestones, sequins, beads, or paint patterns on it with acrylic paint.
In addition, you can make very simple, but interesting toys from old children's plastic toys. For example, you can use plastic or rubber dogs, dinosaurs, cars, simply hanging them on a ribbon. Or you can paint the toy a bright color, and only then attach a ribbon to it and send it to the branch of the street tree.
We've covered a lot interesting options for making Christmas tree decorations with your own hands from scrap materials, but this is not all that you can think of; for inspiration before starting the creative process, watch the video, which presents some more options.
Hi all! The approach of the New Year requires, so to speak, pleasant chores and preparations. In this article you will find many ideas for DIY toys (balls, snowflakes, snowmen and many others)
This master class inspired me to create. It turned out that even ordinary cardboard from a box can be made into such beauty:
Unfortunately, I don’t know what they sprinkle on the photo on the right, but I can recommend dry wallpaper glue and glitter. In the article about You can also read about sparkles (where to find them and what they look like).
I really like the idea of sock snowman toys. You can put these under the Christmas tree or make a craft in the kindergarten. This is not new, but they look great... and do not require special skills or material costs!
They won me over :)
Watch a video on how to make these snowmen on our channel.
They turned out so cute!
The most simple toys for the New Year these are felt toys. Felt is an affordable material, and patterns do not need to process sections.
My sister has been able to do this since she was 6 years old hand stitches do. I think it won’t be difficult for any girl to sew such felt toys under the supervision of her mother!
Available for sale bright colors which will make interesting decorations that will look great on the green needles of the Christmas tree and are also safe for the child. I remember the eldest, when he was still small, climbed onto the back of the sofa and tore a glass toy “icicle” from the Christmas tree...... and took a bite... Fortunately, it only cracked and he didn’t swallow anything. Good thing I was there. But I was convinced that I had secured the toys high. This year we will hang on the lower tier safe toys and secure the tree more tightly, otherwise the youngest is a hurricane!
Light bulbs + imagination + some drawing skills =
All children love to draw! So give them free rein for their creative imagination!
Balls, balls, balls...the most popular New Year's toys:
I suggest you look at an interesting technique for decorating a ball:
I found these photos as an example. After all, if you think about it, there are a lot of ideas for decorating balloons, just change the color of the ribbons, fabric, paper, glitter and paints... Go ahead and create, friends!
Where can I get the blank for New Year's ball, if there is no opportunity to buy? Do it yourself! The video shows in great detail how to make a high-quality blank for the ball.
And this video will tell you how to make a papier mache base:
Originally, yes, from bottle openers. I wonder if the author collected from friends or if he drank so much soda!
Well, the one who knows how to weave from newspaper tubes, it won’t be difficult to weave a ball like this:
A voluminous ball of kusudama paper is perfect for decorating a Christmas tree if you sprinkle it with a little glitter.
How to make a kusudama ball:
Very cute mobiles:
You can make such a lantern from two components from hanging flowerpots and a garland. Especially relevant for terraces and verandas of private houses.
Colorful bells are made from coffee machine capsules:
Dinoyogurt cups are also suitable for this purpose!
Napkins come in handy too:
The most magical night of the year is coming very soon! Left just a little bit. To fill the apartment with this magic, we decorate it in New Year's style- balls, sparkles, tinsel, snowflakes and, of course, the symbol of the New Year. This year it's the Yellow Pig.
Making Christmas tree decorations with your own hands is doubly enjoyable. Especially if you have children. The moments when you make a Christmas tree craft together will never be forgotten by your little one. These magical moments bring you closer together and fill you with a fabulous mood.
Decorate your Christmas tree, make a craft for kindergarten, school, or win a toy competition for street tree, today's ideas will help you. All of them are easy to make and very original. Choose, take note and create yourself or with your children.
Christmas tree decorations for the New Year from scrap materials
To make a beautiful toy, it is not necessary to buy special materials and devices for this. Everything original is simple. Likewise, interesting decorations can be made from the simplest things that are at hand.
Beautiful crafts from light bulbs
DVDs will come in handy.
Another option for a New Year's toy.
You can use plastic bottles.
Decorating a Christmas ball with your own hands
Plain balloons, which are sold in every store on the eve of the New Year, can be decorated to your taste. This way you will save money, because decorated balloons are much more expensive than plain or transparent ones. Plus, it's a great way to get your creative juices flowing.
You will need:
- plain balls;
- PVA glue;
- glue brush;
- artificial snow (sold in many stores);
- sparkles.
Manufacturing:
1.Pour PVA glue into a small bowl. Don't pour out too much as it won't be good for long after that. Using a brush, lubricate the ball from above, from the loop, to approximately the middle. But you can do it in any order you like. Now, pour artificial snow onto the glue and lightly press it onto the ball with your fingers. Leave until dry.
2. You can also draw any pattern (heart, snowflake, etc.) with glue, sprinkle it with glitter or glue it with rhinestones.
New Year's toys made from tin cans
You can make interesting Christmas tree decorations from ordinary Coca-Cola cans. It's very simple.
You will need:
- tin cans for Coca-Cola or other drinks;
- scissors;
- felt-tip pen;
- stencils for toys (you can use paper or cookie cutters);
- thin satin ribbon or another rope for a loop.
Manufacturing:
Coca-Cola has long symbolized Christmas and New Year. Everyone remembers the famous advertisement and the song “The holiday is coming to us...”. So why don’t we make beautiful Christmas tree decorations from cans of this drink?! You can also use tin containers from other brands.
1. Cut off the bottom and top of the jar. Cut the cylinder in half to make a strip. Draw shapes on it using various stencils. You can use cookie cutters or paper snowflakes.
2. Cut out according to the design. Punch a hole at the top and insert a loop.
3. Some shapes, for example, a star, can be bent at the edges, thereby giving it volume. Alternatively, you can glue the figure to a New Year's ball or simply hang it on the Christmas tree.
Homemade lanterns made of cardboard or colored paper
Back in school we were taught to make Christmas tree lanterns with our own hands. This process is not only entertaining, but also very useful for fine motor skills, intelligence and attentiveness. Now we will remember our childhood and immerse ourselves in this magical atmosphere.
You will need:
- colored cardboard (preferably A2 size) or paper;
- ruler;
- a simple pencil;
- needle;
- hole puncher;
- decorative decorations (twigs, berries, snowflakes, etc.);
- thin satin ribbons.
Manufacturing:
1. Cut the cardboard into strips 15 centimeters wide, the entire length of the sheet. Now you need to draw lines along the entire length, 1.5 centimeters wide. Then carefully cut through with the tip of the scissors. This will make them easier to bend.
2. Fold along the lines like an accordion. Mark 6.5 centimeters from both edges. In these places you need to pierce the entire accordion with a needle so that there are 2 holes on each fold, the distance between them will be 2 centimeters.
3. Now you need to make a fold from the upper right side, in the middle, to the lower left hole on the first frill. Now from this bottom hole, fold the cardboard to the top right on the second frill. Thus, fold the entire accordion.
4. Now you need to gather the ends, while giving volume to the figure along the folds.
5. Fold the figure as in the photo.
6. Use a hole punch to pierce the accordion on both edges. Insert one strip on each side through all the holes. Secure the corners with this tape.
7. Decorate with prepared decorations and hang on the tree.
How to make three-dimensional balls for a Christmas tree from plastic bottles
There are plastic bottles in every home. We buy soda, milk, kefir and so on there. Don't rush to throw them away after emptying them. After all, you can make beautiful bottles from such bottles. christmas balls. Bottles that are not smooth, but embossed in a circle, are more suitable. But regular ones will do too.
You will need:
- plastic bottles;
- a beautiful ribbon, about 2 centimeters wide;
- rhinestones, sparkles optional;
- glue;
- nail;
- ribbon for loop;
- pliers.
Manufacturing:
1. Cut the bottle into circles 2 centimeters wide. Or, if you are using a bottle with a round relief, cut along them. You get even rings.
2. Cover each circle with a beautiful ribbon. You can also coat it with glue and sprinkle it with sparkles or rhinestones. In this case, be sure to leave a free space of 2 centimeters wide on opposite sides. These will be the joints of the rings.
3. Connect the rings into a single ball, holding their joint. Heat the clove over the fire, holding it with pliers so as not to get burned. Pierce the place where they connect. Thus, they will be fastened together and a hole will be created for the loop.
4. Thread a ribbon or other string. Hang it on the Christmas tree.
Large toy for the New Year tree on the street from a tin can “Gift from Santa Claus”
A kindergarten or school often announces a competition for toys for a street Christmas tree. You always want to do something original, interesting, but at the same time uncomplicated and not expensive. Nowadays you can see a lot of New Year's beauty beautiful crafts in the form of huge candies, houses or compositions from DVDs. I offer you a very simple version of a craft for a street Christmas tree.
You will need:
- a large can of coffee, enamel paint, etc.;
- a packing sheet of paper (preferably New Year's themed);
- silicone glue gun;
- scissors;
- a small square of plain paper;
- ribbon or other rope for tying;
- decorative bows;
- decorative tape.
Instead of a jar, you can use any box.
Manufacturing:
1.Spread wrapping paper in front of you. Try on how you will place the jar here. Glue a string in the form of a loop to the top of the jar, so that later the toy can be hung on the Christmas tree. First glue the two ends to a small square of paper and then secure it to the jar.
2. Turn the jar upside down. Coat the bottom with a small amount of glue. Try on the wrapping paper so that the can is glued to it exactly in the center. Place the paper in this way, with the pattern facing up, and press firmly to secure the glue. Turn over.
3. Apply glue to the top and glue the short sides first.
4. Now you need to gather the long ends into a ponytail. But to do this, you first need to select the corners with an accordion and glue them together. At the same time, do not forget about the thread, which is intended as a loop for the Christmas tree.
5. Gather the ends into a ponytail, pulling the thread out. Tie it with a beautiful ribbon and tie a bow. Decorate with decorative bows or other New Year's decor elements.
New Year's toys for the Christmas tree made of salt dough
All children love to play with plasticine. Invite them to make a craft from completely safe, natural “plasticine” - salt dough. The result will please everyone. After all, the baby will see a real miracle. A piece of dough turns into a wonderful toy in his hands, and then hardens completely; it can be colored to suit any taste and even hung on a Christmas tree!
You can make dough shapes using cookie cutters or sculpt the shapes yourself using your hands and a clay knife.
To prepare the dough you will need:
- flour, coarse salt and water in equal parts;
- plasticine knife;
- acrylic paints of the desired colors;
- sponge for washing dishes and a thin brush.
The dough must be prepared from three ingredients - water, flour, salt. Knead it and get to work right away. Now we will look at such a craft using the example of the symbol of the coming Year of the Pig.
1. Roll a small piece of dough into a ball and roll it out into a thin layer. This will be the face of our Piggy. Make the same layer, only smaller and glue it to the muzzle. Use a toothpick to identify two nostrils.
2. Attach eyes and ears. Use a knife or toothpick to make peculiar folds on the ears.
3. Cut out the heart and handles. Stick them as if the pig is holding a heart with his hands. On it you can write any wish or congratulations for the New Year. If you plan to hang the toy on the Christmas tree, do not forget to make a hole for the string.
4. Heat the oven to 100 degrees. Send our pig there. There it will dry for several hours. It should harden completely.
5. To give the shape an outline, you need to paint it dark paint, using a sponge, and then rinse under running cool water. This way the paint will remain in the recesses. Then you can begin the final coloring. After drying, thread the thread, secure the ends and hang the toy on the Christmas tree.
In the same way, using any stencils, you can make other toys.
DIY felt Christmas tree toys
Do-it-yourself felt toys are becoming increasingly popular. Even children can make them, of course, under the watchful supervision of adults. This material is pleasant to the touch. Working with him is a pleasure. And what cute toys they make... Admire them for yourself!
As you can see, sewing such toys is not at all difficult. All you have to do is draw a stencil, transfer it to felt and cut it out. And then be guided by your imagination. You can glue this fabric to cardboard cut out using the same stencil. You can fill the toy with padding polyester and decorate it to suit your taste.
For example, to sew such a cute deer you will need:
- scissors;
- felt in white, light brown and dark brown colors;
- thread and needle;
- beads for eyes;
- ribbon or string for a loop;
- padding polyester or other filler.
1.First, transfer the drawing onto a white sheet, according to the template in the photo. Cut them out. Now transfer it to felt in this order - the body, ears and tail are on light brown, the nose and spots are on dark, the muzzle will be white.
2. Cut out shapes from the wind. Sew two parts of the body, not forgetting to leave room for stuffing. After stuffing, you need to stitch it too. Sew on all the other elements, make a loop and glue on the eyes.
You can also use these stencils or draw your own, guided by your imagination and creative flight.
5 ideas on how to decorate a Christmas tree with your own hands (video)
There can never be too many toys on the Christmas tree. Therefore, I offer you 5 more interesting ways make your own Christmas decorations. All of them are simple to implement and very original.
Decorating the New Year tree is a special ritual that we all love since childhood. Then our parents enveloped us in this magic, buying new Christmas tree decorations or making them with us. Today we are helping our children create something special and decorate our New Year's beauty with it. In kindergarten or school, on the eve of the New Year, they always announce a crafts competition. Today's toys will become worthy competitors.
I wish you good luck in all your endeavors! Happy New Year! See you soon!